iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 11336-3:2019

(Main)

Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 3: Quality assurance, installation and in-service inspection

Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 3: Quality assurance, installation and in-service inspection

This document specifies — the content of the product data sheet of glazing materials for use on yachts, — the evaluation of conformity to the product data sheet of laminated glass and laminated safety glass for use on yachts, — the product labelling and identification methods for glass supplied for installation on board a yacht, and — methods for survey of installed glazing. It does not cover distortion of view or aesthetic aspects.

Grands yachts — Résistance, imperméabilité au mauvais temps et étanchéité des ouvertures vitrées — Partie 3: Assurance qualité, installation et inspection en service

General Information

Status
Published
Publication Date
18-Jun-2019
ICS
47.040 - Seagoing vessels
Technical Committee
ISO/TC 8/SC 12 - Ships and marine technology - Large yachts
Drafting Committee
ISO/TC 8/SC 12/WG 2 - Safety and hull integrity
Current Stage
9020 - International Standard under periodical review
Start Date
15-Apr-2024
Completion Date
15-Apr-2024
Ref Project

Buy Standard

ISO 11336-3:2019 - Large yachts -- Strength, weathertightness and watertightness of glazed openingsISO 11336-3:2019 - Large yachts -- Strength, weathertightness and watertightness of glazed openings
PreviousNext
Standard
ISO 11336-3:2019 - Large yachts -- Strength, weathertightness and watertightness of glazed openings
English language
30 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 11336-3
First edition
2019-06
Large yachts — Strength,
weathertightness and watertightness
of glazed openings —
Part 3:
Quality assurance, installation and in-
service inspection
Grands yachts — Résistance, imperméabilité au mauvais temps et
étanchéité des ouvertures vitrées —
Partie 3: Assurance qualité, installation et inspection en service
Reference number
ISO 11336-3:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 11336-3:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 11336-3:2019(E)

Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Requirements for glazing material products . 3
4.1 Product data sheet . 3
4.1.1 General. 3
4.1.2 Data to be provided for all glazing materials . 4
4.1.3 Data to be provided for monolithic glazing materials and monolithic
glazing components . 4
4.1.4 Data to be provided for laminated safety glass and for compound glazing
materials . 5
4.1.5 Insulated glazing units . 5
4.2 Detailed description of the properties . 6
4.2.1 Mechanical properties . 6
4.2.2 Post failure behaviour . 7
4.3 Dangerous substances . 9
4.4 Durability . 9
4.5 Suitability for application on control positions . 9
5 Evaluation of conformity .10
5.1 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 11336-1:2023(Main)
Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 1: Design criteria, materials, framing and testing of independent glazed openings

This document specifies technical requirements for independent glazed openings on large yachts, taking into account navigation conditions, the location of the opening and the materials, framing and testing. Large yachts are yachts with length of the hull, LH, higher or equal to 24 m, used for sport or pleasure and commercial operations. This document is suitable for the design of glazed openings on all large yachts. However, where yachts carry more than 12 passengers, the additional requirements (set by the appropriate marine administration) for fire integrity and damage stability are outside the scope of this standard. The opening and the associated closing appliances considered in this document are only those that are above the deepest waterline (dsw) and are critical for the ship integrity related to weathertightness and watertightness, i.e. those that can lead to ingress of water in the hull in case of rupture, dislocation or loss of the pane or its mounting. This document is related and limited to independent glazed openings in which the pane is supported solely by simple linear support at the edges. Glazing in which the rotation at the edges is constrained more than it would be by a single bond line is not covered by this document. This document, excluding annexes, is limited to glazing of any shape, which is simply supported along all edges. Horizontally positioned glazing is excluded. NOTE This document is based on the experience of ship window and glass manufacturers, shipbuilders and authorities who apply to ships the regulations of SOLAS, as amended[7], and of the International Convention of Load Lines, as amended[6], noting the provisions by the SOLAS Protocol of 1988, Article 8, as agreed by the appropriate Marine Administration, and on the experience gained with application of the Large Commercial Yacht Code and the REG Yacht Code[16].

  • Standard
    59 pages
    English language
    sale 15% off
ISO
ISO 22822:2023(Main)
Large yachts — Quality assessment and acceptance criteria — Dynamic positioning on large yachts

This document specifies the minimum requirements for dynamic positioning (DP) systems on large yachts intended for recreational use (i.e. not mission critical, short duration, mild weather). This document provides minimum requirements for equipment, as well as a calculation method to quantify the DP stationkeeping capability and guidance on testing and personnel requirements.

  • Standard
    17 pages
    English language
    sale 15% off
ISO
ISO 24482:2023(Main)
Large yachts — Navigational bridge visibility

This document specifies requirements for the field of vision from the defined working positions on the bridge of large yachts. It is applicable to large yachts with a length of 24 m or over. NOTE This document supports the aims of SOLAS, Chapter V, Regulation 22.

  • Standard
    16 pages
    English language
    sale 15% off
ISO
ISO 22834:2022(Main)
Large yachts — Quality assessment of life onboard — Stabilization and sea keeping

This document provides a comparative scale (no judgement) of motion-related comfort onboard yachts to be used for technical and commercial benefit. The scale consists of a maximum number of 5 stars, the higher the amount of stars, the higher the comfort onboard. It allows the selection of the most suitable yacht for a specific purpose, evaluates the impact of stabilization systems, compares designs and identifies the most comfortable position onboard. The methodology, work flow and criteria proposed in this document are subject to possible improvements and do not take into account certain important aspects that influence the comfort onboard. The following aspects are not covered in this document: jerk, the method to derive roll damping, stern quartering seas, risk of parametric roll, the influence of the steering devices, green water and waves impacts, compensation for yacht size, gender and age dependency, habituation. By explicitly listing the aspects that are not covered in this document, the reader becomes aware of them and can improve the assessment with dedicated considerations.

  • Standard
    16 pages
    English language
    sale 15% off
ISO
ISO 11336-2:2020(Main)
Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 2: Glazed opening integrated into adjacent structure (elastically bonded to bulkhead or shell) design criteria, structural support, installation and testing

This document specifies technical requirements for direct adhesive bonding of glazing materials into recesses forming part of the structure of the ship and into frames that are fastened to the structure of the ship. It is applicable to large yachts as defined in ISO 11336-1. This document is limited to the bonding of independent glazed openings, where the bonded joint is designed to withstand local loads (from external loads coming from weather and sea conditions, internal impact loads from accidental passenger or cargo shifting, wind suction and accelerations due to ship motions). Bonding of glazed openings where the glazing material is subjected to loads from global ship motions (bending, shear force and torsion), which are considered as structural glazed openings, are outside the scope of this document. Quantitative identification of the global deflection is also outside the scope. Additionally, this document is limited to bonding that exhibits elastic behaviour, and excludes rigid bonding and nonlinear elastic bonding. The design of the bonding for the following installation types is outside the scope of this document: — fire protected areas; — glazed bulwarks; — underwater glazing; — pool glazing; — glazing for use in polar areas; — unstepped IGUs.

  • Standard
    36 pages
    English language
    sale 15% off
ISO
ISO 14884:2015(Main)
Large yachts — Weathertight doors — Strength and weathertightness requirements

ISO 14884:2015 specifies technical requirements for weathertight hinged, sliding, and pantograph doors for manual and powered operation providing access to accommodation and service areas on large yachts, taking into account the location of the appliance. This International Standard only considers design loads applied to the door and transmitted into the frame and the adjacent structure. Loads imparted from the yacht's structure into the door or in its associated frame are not considered in this International Standard. Unframed glazed doors are outside the scope of this International Standard. Forward facing multi-leaf doors on the weather deck are outside the scope of this International Standard. Large yachts are of L greater than or equal to 24 m, in use for sport or pleasure and commercial operations. The appliances considered in this International Standard are primarily those that are intended to achieve weathertightness as required by International Convention on Load Lines 1966 as amended by the Protocol of 1988 (ICLL), (i.e. those fitted in position 1 and position 2) as defined in this regulation. NOTE This International Standard is based on the experience of ship door, window, and glass manufacturers, shipbuilders, and authorities who apply to ships the regulations of the ICLL, noting the provisions of Article 8 "equivalents", as agreed by the appropriate marine administration

  • Standard
    11 pages
    English language
    sale 15% off
ISO
ISO 14886:2014(Main)
Ships and marine technology — Large yachts — Structural fire protection for FRP yachts

ISO 14886:2014 applies to the structural fire protection of large FRP yachts of 24 m in length and over, and carrying up to 12 passengers. ISO 14886:2014 is not applicable to vessels subject to SOLAS. By using the heat transfer Fourier Number, ISO 14886:2014 determines the equivalency of any proposed insulated FRP sandwich laminate to the model insulated sandwich laminate based on a fire tested insulated laminate approved in accordance with IMO FTP Code as a fire-resisting division. The method considers the relevant mechanical, thermal, and physical properties of the insulation and the FRP laminate. The technology of the elements of the insulation and FRP resistance to heat, smoke, and fire used in ISO 14886:2014 and the effectiveness of the insulation are applicable in general to insulated FRP as a fire-resistant material.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off
ISO
ISO 16556:2014(Main)
Large yachts — Deck equipment — Anchoring equipments

ISO 16556:2014 defines the requirements for layout, design, and installation for large yacht anchoring equipment.

  • Standard
    8 pages
    English language
    sale 15% off
ISO
ISO 14885:2014(Main)
Large yachts — Diesel engines for main propulsion and essential auxiliaries — Safety requirements

ISO 14885:2014 specifies the safety requirements for diesel engines with a rated power of 100kW and over for propulsion and essential auxiliaries for power generation for large yachts 24 m and over in hull length, measured in accordance with ISO 8666:2002, and of less than 500 GT which are in commercial use for sport or pleasure, and do not carry cargo and do not carry more than twelve passengers. The engine in terms of ISO 14885:2014 is understood as the prime mover up to its driving extremitie(s) for power take off(s). ISO 14885:2014 does not cover engines used for generating the emergency source of electrical power.

  • Standard
    18 pages
    English language
    sale 15% off
  • Standard
    18 pages
    French language
    sale 15% off
ISO
ISO 11209:2012(Main)
Ships and marine technology — Large yachts — Deck crane and access gangways strength requirements

ISO 11209:2012 gives guidelines for the minimum structural scantling of lifting appliances for large yachts. It is applicable to the following lifting appliances: · cranes; · access gangways (including side ladders); · access gangways when used as a lifting appliance. ISO 11209:2012 is not applicable to lifting means for life saving appliances, which are covered by recognized rules and/or international regulations. ISO 11209:2012 covers mainly the following aspects: · service class; · applied loads; · design criteria; · allowable stress; · strength check; · elastic stability check; · connections.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    14 pages
    French language
    sale 15% off