ISO 3606:1976

Unplasticized polyvinyl chloride (PVC) pipes — Tolerances on outside diameters and wall thicknesses

Tubes en polychlorure de vinyle (PVC) non plastifié — Tolérances sur le diamètre extérieur et l'épaisseur de paroi

Cevi iz nemehčanega polivinilklorida (PVC - U) - Tolerance zunanjih premerov in debeline sten

General Information

• Status: Withdrawn
• Publication Date: 31-Oct-1976
• Withdrawal Date: 31-Oct-1976
• ICS: 23.040.20 - Plastics pipes
• Technical Committee: ISO/TC 138 - Plastics pipes, fittings and valves for the transport of fluids
• Drafting Committee: ISO/TC 138 - Plastics pipes, fittings and valves for the transport of fluids
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 02-Apr-1997
• Ref Project: SIST ISO 3606:1995 - Unplasticized polyvinyl chloride (PVC) pipes -- Tolerances on outside diameters and wall thicknesses

Relations

• Revised: ISO 11922-1:1997 - Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series
• Effective Date: 15-Apr-2008
• Revised: ISO 11922-2:1997 - Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 2: Inch-based series
• Effective Date: 15-Apr-2008
• Revises: ISO/R 1165:1970 - Withdrawal of ISO/R 1165-1970
• Effective Date: 15-Apr-2008
• Revises: ISO/R 1330:1970 - Withdrawal of ISO/R 1330-1970
• Effective Date: 15-Apr-2008

Standards Content (Sample)

INTERNATIONAL STANDARD 3606
INTERNATIONAL üRGANIZATION FOR STANDARDIZATION .MFWiYHAPOLlHAR OPrAHH3AUMR JI0 CTAHlIAPTH3AUHH.ORGANlSATlON INTERNATIONALE DE NORMALISATION
Unplasticized polyvinyl chloride (PVC) pipes - Tolerances on
outside diameters and wall thicknesses
Tubes en polychlorure de vinyle (PVC) non plastifié - Tolérances sur le diamètre extérieur et l'épaisseur de paroi
First edition - 1976-1 1-15
Ref. No, IS0 3606-1976 (E)
UDC 621.643.29 : 678.743.22 : 531.717.1
Descriptors ' piping, plastic tubes, unplasticized polyvinyl chloride, specifications, diameters, thickness, dimensional tolerances.
Price based on 2 pages

---------------------- Page: 1 ----------------------
FOREWORD
IS0 (the International Organization for Standardization) is a worldwide federation
of national standards institutes (IS0 Member Bodies). The work of developing
International Standards is carried out through IS0 Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the IS0 Council.
International Standard IS0 3606 was drawn up by Technical Committee
ISOITC 138, Plastics pipes, fittings and valves for the transport of fluids, and was
circulated to the Member Bodies in December 1974.
It has been approved by the Member Bodies of the following countries :
Austria Italy South Africa, Rep. of
Belgium Japan Spain
Denmark Mexico Sweden
Finland Netherlands Switzerland
France New Zealand Turkey
Germany Norway U.S.A.
India Poland U.S.S. R.
Ireland Portugal Yugoslavia
Israel Romania
The Member Body of the following country expressed disapproval of the document
on technical grounds :
United Kingdom
This international Standard cancels and replaces IS0 Recommen-
dations R 1165-1970 and R 1330-1970, of which documents it constitutes a
technical revision.
O international Organization for Standardization, 1976 4
Printed in Switzerland

---------------------- Page: 2 ----------------------
IS0 3606-1976 (E)
INTERNATIONAL STANDARD
Unplasticized polyvinyl chloride (PVC) pipes - Tolerances on
outside diameters and wall thicknesses
i
’? SCOPE AND FIELD OF APPLICATION 3.2 Tolerances
This International Standard spe
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tubes en polychlorure de vinyle (PVC) non plastifié -- Tolérances sur le diamètre extérieur et l'épaisseur de paroiUnplasticized polyvinyl chloride (PVC) pipes -- Tolerances on outside diameters and wall thicknesses23.040.20Cevi iz polimernih materialovPlastics pipesICS:Ta slovenski standard je istoveten z:ISO 3606:1976SIST ISO 3606:1995en01-november-1995SIST ISO 3606:1995SLOVENSKI
STANDARD



SIST ISO 3606:1995



INTERNATIONAL STANDARD 3606 INTERNATIONAL üRGANIZATION FOR STANDARDIZATION .MFWiYHAPOLlHAR OPrAHH3AUMR JI0 CTAHlIAPTH3AUHH.ORGANlSATlON INTERNATIONALE DE NORMALISATION Unplasticized polyvinyl chloride (PVC) pipes - Tolerances on outside diameters and wall thicknesses Tubes en polychlorure de vinyle (PVC) non plastifié - Tolérances sur le diamètre extérieur et l'épaisseur de paroi First edition - 1976-1 1-15 UDC 621.643.29 : 678.743.22 : 531.717.1 Ref. No, IS0 3606-1976 (E) Descriptors ' piping, plastic tubes, unplasticized polyvinyl chloride, specifications, diameters, thickness, dimensional tolerances. Price based on 2 pages SIST ISO 3606:1995



FOREWORD IS0 (the International Organization for Standardization) is a worldwide federation of national standards institutes (IS0 Member Bodies). The work of developing International Standards is carried out through IS0 Technical Committees. Every Member Body interested in a subject for which a Technical Committee has been set up has the right to be represented on that Committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the Technical Committees are circulated to the Member Bodies for approval before their acceptance as International Standards by the IS0 Council. International Standard IS0 3606 was drawn up by Technical Committee ISOITC 138, Plastics pipes, fittings and valves for the transport of fluids, and was circulated to the Member Bodies in December 1974. It has been approved by the Member Bodies of the following countries : Austria Belgium Denmark Finland France Germany India Ireland Israel Italy Japan Mexico Netherlands New Zealand Norway Poland Portugal Romania South Africa, Rep. of Spain Sweden Switzerland Turkey U.S.A. U.S.S. R. Yugoslavia The Member Body of the following country expressed disapproval of the document on technical grounds : United Kingdom This international Standard cancels and replaces IS0 Recommen- dations R 1165-1970 and R 1330-1970, of which documents it constitutes a technical revision. O international Organization for Standardization, 1976 4 Printed in Switzerland SIST
...

f
NORME INTERNATIONALE 3606
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION eMEXnYHAPOnHAR OPrAHW3AUHR Il0 CTAHnAPTM3AUHH .ORGANISATION INTERNATIONALE DE NORMALISATION
Tubes en polychlorure de vinyle (PVC) non plastifie -
Tolérances sur le diamètre extérieur et l'épaisseur de paroi
Unplasticized polyvinyl chloride (PVC) pipes - Tolerances on outside diameters and wall thicknesses
Première édition - 1976-1 1-15
Réf. no : IS0 3606-1976 (FI
CDU 621.643.29 : 678.743.22 : 531.717.1
Descripteurs *: tuyauterie, tube en matière plastique, polychlorure de vinyle non plastifié, spécification, diahlètre, épaisseur, tolérance de
dimension.
Prix basé sur 2 pages

---------------------- Page: 1 ----------------------
\
AVANT-PROPOS
L’ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres 60). L’élaboration des
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec 1‘60, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
La Norme Internationale IS0 3606 a été établie par le Comité Technique
ISOITC 138, Tubes, raccords et robinetterie en matières plastiques pour le trans-
port des fluides, et a été soumise aux Comités Membres en décembre 1974.
Elle a été approuvée par les Comités Membres des pays suivants :
Portugal
Afrique du Sud, Rép. d’ Irlande
Allemagne Israël Roumanie
Autriche Italie Suède
Belgique Japon Suisse
Turquie
Danemark Mexique
Norvège U.R.S.S.
Espagne
Finlande Nouvelle-Zélande U.S.A.
France
Pays-Bas Yougoslavie
Pologne
Inde
Le Comité Membre du pays suivant a désapprouvé le document pour des raisons
techniques :
Royaume-Uni
Cette Norme Internationale annule et remplace les Recomman-
dations ISO/R 1165-1970 et ISO/R 1330-1970, dont elle constitue une révision
technique.
O Organisation Internationale de Normalisation, 1976 O
Imprimé en Suisse

---------------------- Page: 2 ----------------------
~ ~
IS0 3606-1976 (FI
NORM E I NTE R NAT I ON ALE
Tubes en polychlorure de vinyle (PVC) non plastifie -
Tolérances sur le diamètre extérieur et l'épaisseur de paroi
3.2 Tolérances
1 OBJET ET DOMAINE D'APPLICATION
La présente Norme Internationale fixe les écarts admissibles
3.2.1 Diamètre extérieur moyen' )
sur le diamètre extérieur et l'épaisseur de paroi des tubes
conformes à I'ISO 161/1 et à I'ISO 161/11.
3.2.1.1 TUBES SELON L'ISO 161/1
La présente Norme Internationale s'applique aux tubes de
L'écart admissible (d, - de) entre le diamètre moyen (d,)
section circulaire en polychlorure de vinyle (PVC) non
et le diamètre extérieur nominal (de) d'un tube tel qu'il est
plastifié destinés au transport de
...