ISO/DIS 10009

Quality management — Guidance for quality tools and their application

This document introduces quality tools which can be used with quality management systems to: a) maintain compliance; b) describe trends and process characteristics; c) focus on areas for improvement. Guidance on their selection and application is provided with the aim of providing a resource to practitioners and promoting the appropriate use of quality tools.

Management de la qualité — Recommandations pour les outils qualité et leur mise en oeuvre

Vodenje kakovosti - Napotki za orodja za kakovost in njihovo uporabo

General Information

• Status: Not Published
• ICS: 03.120.10 - Quality management and quality assurance
• Technical Committee: ISO/TC 176/SC 3 - Supporting technologies
• Drafting Committee: ISO/TC 176/SC 3 - Supporting technologies
• Current Stage: 4099 - Full report circulated: DIS approved for registration as FDIS
• Completion Date: 19-Sep-2023
• Ref Project: oSIST ISO/DIS 10009:2023 - Quality management - Guidance for quality tools and their application

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST ISO/DIS 10009:2023
01-april-2023
Vodenje kakovosti - Napotki za orodja za kakovost in njihovo uporabo
Quality management - Guidance for quality tools and their application
Management de la qualité - Lignes directrices pour des instruments et techniques
qualités pour l'ISO 9001
Ta slovenski standard je istoveten z: ISO/DIS 10009
ICS:
03.100.70 Sistemi vodenja Management systems
03.120.10 Vodenje in zagotavljanje Quality management and
kakovosti quality assurance
oSIST ISO/DIS 10009:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST ISO/DIS 10009:2023

---------------------- Page: 2 ----------------------
oSIST ISO/DIS 10009:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 10009
ISO/TC 176/SC 3 Secretariat: SA
Voting begins on: Voting terminates on:
2023-02-13 2023-05-08
Quality management — Guidance for quality tools and
their application
Management de la qualité — Lignes directrices pour des instruments et techniques qualités pour l'ISO
9001
ICS: 03.120.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
This document is circulated as received from the committee secretariat.
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 10009:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST ISO/DIS 10009:2023
ISO/DIS 10009:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 10009
ISO/TC 176/SC 3 Secretariat: SA
Voting begins on: Voting terminates on:

Quality management — Guidance for quality tools and
their application
Management de la qualité — Lignes directrices pour des instruments et techniques qualités pour l'ISO
9001
ICS: 03.120.10
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
THEREFORE SUBJECT TO CHANGE AND MAY
This document is circulated as received from the committee secretariat.
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 10009:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 4 ----------------------
oSIST ISO/DIS 10009:2023
ISO/DIS 10009:2022(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...