Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Policies and Procedures for Operation in the TV Bands — Amendment 1: Management and control plane interfaces and procedures and enhancement to the management information base (MIB)

Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 22: Spécifications du contrôle d'accès du milieu sans fil cognitif (MAC) et de la couche physique (PHY) : Politiques et procédures pour le fonctionnement dans les bandes TV — Amendement 1: Management et interfaces du plan de contrôle, et modes opératoires et amélioration de la base de données de gestion (MIB)

General Information

Status
Withdrawn
Publication Date
26-Oct-2017
Current Stage
9599 - Withdrawal of International Standard
Completion Date
22-Jun-2022
Ref Project

Relations

Buy Standard

Standard
ISO/IEC/IEEE 8802-22:2015/Amd 1:2017 - Management and control plane interfaces and procedures and enhancement to the management information base (MIB)
English language
507 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO/IEC/
STANDARD IEEE
8802-22
First edition
2015-05-01
AMENDMENT 1
2017-10
Information technology —
Telecommunications and information
exchange between systems — Local
and metropolitan area networks —
Specific requirements —
Part 22:
Cognitive Wireless RAN Medium
Access Control (MAC) and Physical
Layer (PHY) Specifications: Policies
and Procedures for Operation in the
TV Bands
AMENDMENT 1: Management and
control plane interfaces and procedures
and enhancement to the management
information base (MIB)
Technologies de l'information — Télécommunications et échange
d'information entre systèmes — Réseaux locaux et métropolitains —
Exigences spécifiques —
Partie 22: Spécifications du contrôle d'accès du milieu sans fil cognitif
(MAC) et de la couche physique (PHY) : Politiques et procédures pour
le fonctionnement dans les bandes TV
Reference number
ISO/IEC/IEEE 8802-22:2015/Amd.1:2017(E)
©
 IEEE 2014

---------------------- Page: 1 ----------------------
ISO/IEC/IEEE 8802-22:2015/Amd.1:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© IEEE 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO or IEEE at the address below or ISO’s member body in the
country of the requester.
ISO copyright office Institute of Electrical and Electronics Engineers, Inc
Ch. de Blandonnet 8 • CP 401 3 Park Avenue, New York
CH-1214 Vernier, Geneva, Switzerland NY 10016-5997, USA
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org stds.ipr@ieee.org
www.iso.org www.ieee.org
© IEEE 2014 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/IEC/IEEE 8802-22:2015/Amd 1:2017(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
In the field of information technology, ISO and IEC have established a joint technical committee,
ISO/IEC JTC 1.
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its
standards through a consensus development process, approved by the American National Standards
Institute, which brings together volunteers representing varied viewpoints and interests to achieve the final
product. Volunteers are not necessarily members of the Institute and serve without compensation. While
the IEEE administers the process and establishes rules to promote fairness in the consensus
development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the
information contained in its standards.
The main task of ISO/IEC JTC 1 is to prepare International Standards. Draft International Standards
adopted by the joint technical committee are circulated to national bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is called to the possibility that implementation of this standard may require the use of subject
matter covered by patent rights. By publication of this standard, no position is taken with respect to the
existence or validity of any patent rights in connection therewith. ISO/IEEE is not responsible for
identifying essential patents or patent claims for which a license may be required, for conducting inquiries
into the legal validity or scope of patents or patent claims or determining whether any licensing terms or
conditions provided in connection with submission of a Letter of Assurance or a Patent Statement and
Licensing Declaration Form, if any, or in any licensing agreements are reasonable or non-discriminatory.
Users of this standard are expressly advised that determination of the validity of any patent rights, and the
risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained
from ISO or the IEEE Standards Association.
ISO/IEC/IEEE 8802-22:2015/Amd 1 was prepared by the LAN/MAN of the IEEE Computer Society (as
IEEE 802.22a-2014). It was adopted by Joint Technical Committee ISO/IEC JTC 1, Information
technology, Subcommittee SC 6, Telecommunications and information exchange between systems, in
parallel with its approval by the ISO/IEC national bodies, under the “fast-track procedure” defined in the
Partner Standards Development Organization cooperation agreement between ISO and IEEE. IEEE is
responsible for the maintenance of this document with participation and input from ISO/IEC national
bodies.
© IEEE 2014 – All rights reserved
iii

---------------------- Page: 3 ----------------------
IEEE Std 802.22a™-2014
(Amendment to
IEEE Std 802.22™-2011)
IEEE Standard for Information Technology—
Telecommunications and information exchange
between systems
Wireless Regional Area Networks (WRAN)—
Specific requirements
Part 22: Cognitive Wireless RAN
Medium Access Control (MAC) and
Physical Layer (PHY) Specifications:
Policies and Procedures for
Operation in the TV Bands
Amendment 1: Management and Control
Plane Interfaces and Procedures and
Enhancement to the Management
Information Base (MIB)
Sponsor
LAN/MAN Standards Committee
of the
IEEE Computer Society
Approved 27 March 2014
IEEE-SA Standards Board

---------------------- Page: 4 ----------------------
ISO/IEC/IEEE 8802-22:2015/Amd 1:2017(E)
Abstract: This air interface, including the medium access control layer (MAC)
and physical layer (PHY), of the fixed and portable point-to-multipoint wireless
regional area networks (WRANs) operating in spectrum allocated to the
Television Broadcasting Service in the frequency range of 54 MHz to 862 MHz is
described in this amendment.
Keywords: broadband wireless access network, cognitive radio, fixed user
terminals, IEEE 802.22a™, portable user terminals, radio spectrum sensing,
regional area network, WRAN standards
1
1
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2014 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 30 May 2014. Printed in the United States of America.
IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics
Engineers, Incorporated.
PDF: ISBN 978-0-7381-9003-7 STD98586
Print: ISBN 978-0-7381-9004-4 STDPD98586
IEEE prohibits discrimination, harassment, and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.
ii
Copyright © 2014 IEEE. All rights reserved.
© IEEE 2014 – All rights reserved

---------------------- Page: 5 ----------------------
ISO/IEC/IEEE 8802-22:2015/Amd 1:2017(E)
Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These
notices and disclaimers, or a reference to this page, appear in all standards and may be found under the
heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Standards
Documents.”
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are
developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards
Association (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a
consensus development process, approved by the American National Standards Institute (“ANSI”), which
brings together volunteers representing varied viewpoints and interests to achieve the final product.
Volunteers are not necessarily members of the Institute and participate without compensation from IEEE.
While IEEE administers the process and establishes rules to promote fairness in the consensus development
process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the
soundness of any judgments contained in its standards.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and
expressly disclaims all warranties (express, implied and statutory) not included in this or any other
document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness
for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness
of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.
IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related
to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved
and issued is subject to change brought about through developments in the state of the art and comments
received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his
or her own independent judgment in the exercise of reasonable care in any given circumstances or, as
appropriate, seek the advice of a competent professional in determining the appropriateness of a given
IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO:
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE
UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
iii
Copyright © 2014 IEEE. All rights reserved.
© IEEE 2014 – All rights reserved

---------------------- Page: 6 ----------------------
ISO/IEC/IEEE 8802-22:2015/Amd 1:2017(E)
Translations
The IEEE consensus development process involves the review of documents in English only. In the event
that an IEEE standard is translated, only the English version published by IEEE should be considered the
approved IEEE standard.
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that his or her views should be considered the personal views of that individual rather than the
formal position of IEEE.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE. However, IEEE does not provide consulting information or advice
pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a
proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a
consensus of concerned interests, it is important that any responses to comments and questions also receive
the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and
Standards Coordinating Committees are not able to provide an instant response to comments or questions
except in those cases where the matter has previously been addressed. For the same reason, IEEE does not
respond to interpretation requests. Any person who would like to participate in revisions to an IEEE
standard is welcome to join the relevant IEEE working group.
Comments on standards should be submitted to the following address:
Secretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with
the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, IEEE does not waive any rights in copyright to the
documents.
iv
Copyright © 2014 IEEE. All rights reserved.
© IEEE 2014 – All rights reserved

---------------------- Page: 7 ----------------------
ISO/IEC/IEEE 8802-22:2015/Amd 1:2017(E)
Photocopies
Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to
photocopy portions of any individual standard for company or organizational internal use or individual,
non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance
Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission
to photocopy portions of any individual standard for educational classroom use can also be obtained
through the Copyright Clearance Center.
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time
by the issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every ten years. When a document is more than ten
years old and has not undergone a revision process, it is reasonable to conclude that its contents, although
still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to
determine that they have the latest edition of any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended
through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at
http://ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more
information about the IEEE SA or IEEE’s standards development process, visit the IEEE-SA Website at
http://standards.ieee.org.
Errata
Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL:
http://standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata
periodically.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to
the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant
has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the
IEEE-SA Website at http://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may
indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without
compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of
any unfair discrimination to applicants desiring to obtain such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not
responsible for identifying Essential Patent Claims for which a license may be required, for conducting
inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or
conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing
agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that
determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely
their own responsibility. Further information may be obtained from the IEEE Standards Association.
v
Copyright © 2014 IEEE. All rights reserved.
© IEEE 2014 – All rights reserved

---------------------- Page: 8 ----------------------
ISO/IEC/IEEE 8802-22:2015/Amd 1:2017(E)
Participants
At the time this amendment went to sponsor ballot, the IEEE 802.22 Working Group had the following
officer:
Apurva Mody, Chair
Chang-woo Pyo, Vice Chair
When this amendment was sent to sponsor ballot, the Task Group a had the following membership:
Ranga Reddy, Chair and Editor
Winston Caldwell Hynduk Kang Shigenobu Sasaki
Charles Einolf Gwangzeen Ko Steven Shellhammer
Peter Flynn Bruce Kraemer Chunyi Song
Tom Gurley Donghun Lee Victor Tawil
Hiroshi Harada Liru Lu Keat-Beng Toh
Bob Heile Michael Lynch Junyi Wang
Byng Jeong Jang Paul Nikolich Bing Xuan Zhao
Jerry Kalke Xin (Amy) Zhang
Major contributions were received from the following individuals:
Gerald Chouinard Sunghyun Hwang Ranga Reddy
Charles Einolf Gwangzeen Ko Ivan Reede
Chang-woo Pyo
The following members of the balloting committee voted on this amendment. Balloters may have voted for
approval, disapproval, or abstention.
Wole Akpose Akio Iso Michael Newman
Thomas Alexander Atsushi Ito Nick S. A. Nikjoo
Nobumitsu Amachi Bobby Jose Venkatesha Prasad
Butch Anton Shinkyo Kaku Ivan Reede
Mathild Benveniste Piotr Karocki Maximilian Riegel
Harry Bims Stuart Kerry Robert Robinson
Nancy Bravin Gwangzeen Ko William Rose
William Byrd Bruce Kraemer John Santhoff
Juan Carreon Yasushi Kudoh Shigenobu Sasaki
Dave Cavalcanti Geoff Ladwig Naotaka Sato
Keith Chow Arthur H. Light Kapil Sood
Richard Edgar Liru Lu Thomas Starai
Charles Einolf William Lumpkins Rene Struik
Peter Flynn Greg Luri Walter Struppler
Avraham Freedman Elvis Maculuba Keat-Beng Toh
Devon Gayle Jeffery Masters Ha-Nguyen Tran
Randall Groves Edward McCall Dmitri Varsanofiev
Michael Gundlach Michael McInnis Prabodh Varshney
Marco Hernandez Apurva Mody George Vlantis
Werner Hoelzl Jose Morales Hung-Yu Wei
Sunghyun Hwang Peter Murray Oren Yuen
Noriyuki Ikeuchi Nabil Nasser Daidi Zhong
vi
Copyright © 2014 IEEE. All rights reserved.
© IEEE 2014 – All rights reserved

---------------------- Page: 9 ----------------------
ISO/IEC/IEEE 8802-22:2015/Amd 1:2017(E)
When the IEEE-SA Standards Board approved this on 27 March 2014, it had the following membership:
John Kulick, Chair
Jon Walter Rosdahl, Vice-chair
Richard H. Hulett, Past Chair
Konstantinos Karachalios, Secretary
Peter Balma Michael Janezic Ron Peterson
Farooq Bari Jeffrey Katz Adrian Stephens
Ted Burse Joseph L. Koepfinger* Peter Sutherland
Clint Chaplain David J. Law Yatin Trivedi
Stephen Dukes Hung Ling Phil Winston
Jean-Phillippe Faure Oleg Logvinov Don Wright
Gary Hoffman Ted Olsen Yu Yuan
Glenn Parsons
*Member Emeritus
Also included are the following nonvoting IEEE-SA Standards Board liaisons:
Richard DeBlasio, DOE Representative
Michael Janezic, NIST Representative
Catherine Berger
IEEE Standards Senior Program Manager, Document Development
Lisa Perry
IEEE Standards Program Manager, Technical Program Development
vii
Copyright © 2014 IEEE. All rights reserved.
© IEEE 2014 – All rights reserved

---------------------- Page: 10 ----------------------
ISO/IEC/IEEE 8802-22:2015/Amd 1:2017(E)
Introduction
This introduction is not part of IEEE Std 802.22a-2014, IEEE Standard for Information Technology—
Telecommunications and information exchange between systems—Wireless Regional Area Networks(WRAN)—
Specific requirements—Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY)
Specifications: Policies and Procedures for Operation in the TV Bands—Amendment 1: Management and Control
Plane Interfaces and Procedures and Enhancement to the Management Information Base (MIB).
This amendment to IEEE Std 802.22-2011 defines a new clause for Management and Control Plane
interfaces and procedures for operation in very high frequency and ultra-high frequency (VHF/UHF)
television (TV) broadcast bands between 54 MHz and 862 MHz. The Management Information Base
(MIB) structure enhancement includes changes to comply with the ASN.1 format and support for the new
clause. Modifications to the existing clause on primitives for cognitive radio capabilities (Clause 10) to
align it with the content in the MIB clause (Clause 13) and the new clause (Clause 14) are also defined.
viii
Copyright © 2014 IEEE. All rights reserved.
© IEEE 2014 – All rights reserved

---------------------- Page: 11 ----------------------
ISO/IEC/IEEE 8802-22:2015/Amd 1:2017(E)

Contents

5 System architecture . 2
5.2 Management reference architecture . 2
5.2.1 Service access primitives (SAPs)PHY/MAC to NCMS interface . 2
5.2.4 Managed objects . 3
10 Cognitive radio capability . 3
10.7 Primitives for cognitive radio capabilities . 3
12 Parameters and connection management . 4
12.1 Parameters, timers, message IEs . 4
12.1.1 MAC (dynamic service flow, multicast, ARQ, capability, and bandwidth management) . 4
12.1.2 PHY (initialization, operation, and DS/US synchronization) . 6
12.1.3 Coexistence . 8
12.1.4 Security . 9
12.1.5 Cognitive radio capabilities (SM, SSA, incumbent protection, QP management) . 10
13 MIB structure . 14
13.1 MIB description . 14
13.1.1 wranDevMib . 14
13.1.2 wranIfBsMib . 20
13.1.3 wranIfBsSfMgmtMibwranIfBsSfMgmt . 72
13.1.4 wranIfCpeMib . 85
13.1.5 wranIfSmMib. 90
13.1.6 wranIfSsaMib .102
13.1.7 wranIfDatabaseServiceMib .116
13.2 MIB module definitions (ASN.1) .126
13.2.1 wranDevMib .126
13.2.2 wranIfBsMib .144
13.2.3 wranIfBsSfMgmtMib .291
13.2.4 wranIfCpeMib .323
13.2.5 wranIfSmMib.335
13.2.6 wranIfSsaMib .367
13.2.7 wranIfDatabaseServiceMib .407
14 Management plane interfaces and procedures .430
14.1 Primitive format .430
14.1.1 Purpose .430
14.1.2 SAP type .430
14.1.3 Operation type .430
14.1.4 Destination .430
14.1.5 Data .430
14.1.6 When generated .431
14.1.7 Effect of receipt .431
14.2 Primitive definitions .431
14.2.1 Management SAP (M-SAP) .431
14.2.2 Spectrum Manager-Spectrum Sensing Function SAP (SM-SSF-SAP) .463
14.2.3 Spectrum Manager-Geolocation SAP (SM-GL-SAP) .467
14.2.4 Control SAP (C-SAP) .470


ix
Copyright © 2014 IEEE. All rights reserved.
© IEEE 2014 – All rights reserved

---------------------- Page: 12 ----------------------
ISO/IEC/IEEE 8802-22:2015/Amd 1:2017(E)
x
Copyright © 2014 IEEE. All rights reserved.
© IEEE 2014 – All rights reserved

---------------------- Page: 13 ----------------------
ISO/IEC/IEEE 8802-22:2015/Amd 1:2017(E)

IEEE Standard for Information Technology—
Telecommunications and information exchange
between systems
Wireless Regional Area Networks (WRAN)—
Specific requirements
Part 22: Cognitive Wireless RAN
Medium Access Control (MAC) and
Physical Layer (PHY) Specifications:
Policies and Procedures for
Operation in the TV Bands
Amendment 1: Management and Control
Plane Interfaces and Procedures and
Enhancement to the Management
Information Base (MIB)
IMPORTANT NOTICE: IEEE Standards documents are not intended to ensure safety, security, health,
or environmental protection, or ensure against i
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.