ISO 19101-2:2018

Geographic information — Reference model — Part 2: Imagery

This document defines a reference model for standardization in the field of geographic imagery processing. This reference model identifies the scope of the standardization activity being undertaken and the context in which it takes place. The reference model includes gridded data with an emphasis on imagery. Although structured in the context of information technology and information technology standards, this document is independent of any application development method or technology implementation approach.

Information géographique — Modèle de réference — Partie 2: Imagerie

Le présent document définit un modèle de référence pour la normalisation dans le domaine du traitement de l'imagerie géographique. Ce modèle de référence identifie le domaine d'application de l'activité de normalisation entreprise, ainsi que le contexte dans lequel elle se produit. Le modèle de référence inclut des données maillées, avec l'accent mis sur l'imagerie. Même si le présent document est structuré dans le contexte des technologies de l'information et des normes s'y rapportant, il ne dépend d'aucune méthode de développement d'applications, ni d'aucune approche de mise en œuvre de technologie.

Geografske informacije - Referenčni model - 2. del: Podobe

Ta standard določa referenčni model za standardizacijo na področju obdelave geografskih podob. Ta referenčni model določa obseg dejavnosti standardizacije in kontekst, v katerem se izvaja. Referenčni model vključuje mrežne podatke s poudarkom na podobah. Čeprav je bil strukturiran v kontekstu informacijske tehnologije in standardov informacijske tehnologije, ta dokument ni odvisen od nobene metode za razvoj uporabe ali pristopa za uvedbo tehnologije.

General Information

• Status: Published
• Publication Date: 23-May-2018
• ICS: 35.240.70 - IT applications in science
• Technical Committee: ISO/TC 211 - Geographic information/Geomatics
• Drafting Committee: ISO/TC 211/WG 6 - Imagery
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 20-Sep-2023
• Ref Project: SIST ISO 19101-2:2019 - Geographic information -- Reference model -- Part 2: Imagery

Relations

• Revises: ISO/TS 19101-2:2008 - Geographic information — Reference model — Part 2: Imagery
• Effective Date: 04-Nov-2015

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ISO 19101-2:2019
01-november-2019
Nadomešča:
SIST-TS ISO/TS 19101-2:2009
Geografske informacije - Referenčni model - 2. del: Podobe
Geographic information -- Reference model -- Part 2: Imagery
Information géographique -- Modèle de réference -- Partie 2: Imagerie
Ta slovenski standard je istoveten z: ISO 19101-2:2018
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
SIST ISO 19101-2:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST ISO 19101-2:2019

---------------------- Page: 2 ----------------------
SIST ISO 19101-2:2019
INTERNATIONAL ISO
STANDARD 19101-2
First edition
2018-05
Geographic information — Reference
model —
Part 2:
Imagery
Information géographique — Modèle de réference —
Partie 2: Imagerie
Reference number
ISO 19101-2:2018(E)
©
ISO 2018

---------------------- Page: 3 ----------------------
SIST ISO 19101-2:2019
ISO 19101-2:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 4 ----------------------
SIST ISO 19101-2:2019
ISO 19101-2:2018(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms and symbols . 6
4.1 Abbreviated terms . 6
4.2 Symbols . 9
5 Conformance . 9
5.1 General . 9
5.2 Enterprise conformance . 9
5.3 Sensor conformance . 9
5.4 Imagery data conformance .10
5.5 Imagery services conformance .10
5.6 Image processing system conformance .
...

INTERNATIONAL ISO
STANDARD 19101-2
First edition
2018-05
Geographic information — Reference
model —
Part 2:
Imagery
Information géographique — Modèle de réference —
Partie 2: Imagerie
Reference number
ISO 19101-2:2018(E)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 19101-2:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 19101-2:2018(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms and symbols . 6
4.1 Abbreviated terms . 6
4.2 Symbols . 9
5 Conformance . 9
5.1 General . 9
5.2 Enterprise conformance . 9
5.3 Sensor conformance . 9
5.4 Imagery data conformance .10
5.5 Imagery services conformance .10
5.6 Image processing system conformance .10
6 Notation .10
7 Enterprise viewpoint – Community objectives and policies .10
7.1 General .10
7.2 Geographic imagery community objective .10
7.3 Geographic imagery scenario .
...

NORME ISO
INTERNATIONALE 19101-2
Première édition
2018-05
Information géographique — Modèle
de réference —
Partie 2:
Imagerie
Geographic information — Reference model —
Part 2: Imagery
Numéro de référence
ISO 19101-2:2018(F)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 19101-2:2018(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2018
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en oeuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Tél.: [phone]
Fax: [phone]
E-mail: [e-mail]
Web: www.iso.org
Publié en Suisse
ii © ISO 2018 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 19101-2:2018(F)

Sommaire Page
Avant-propos .v
Introduction .vi
1 Domaine d'application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Abréviations et symboles . 6
4.1 Abréviations . 6
4.2 Symboles .10
5 Conformité .10
5.1 Généralités .10
5.2 Conformité métier .10
5.3 Conformité des capteurs .10
5.4 Conformité des données d'imagerie .10
5.5 Conformité des services d'imagerie .10
5.6 Conformité du système de traitement d'images .10
6 Notation .10
7 Point de vue métier — Objectifs et politiques communautaires .11
7.1 Généralités .11
7.2 Objectif de la communauté de l'imagerie géographique .11
7.3 Scénario d'imagerie géographique .
...

SLOVENSKI STANDARD
oSIST ISO/DIS 19101-2:2017
01-maj-2017
*HRJUDIVNHLQIRUPDFLMH5HIHUHQþQLPRGHOGHO3RGREH
Geographic information -- Reference model -- Part 2: Imagery
Information géographique -- Modèle de réference -- Partie 2: Imagerie
Ta slovenski standard je istoveten z: ISO/DIS 19101-2
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
oSIST ISO/DIS 19101-2:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST ISO/DIS 19101-2:2017

---------------------- Page: 2 ----------------------
oSIST ISO/DIS 19101-2:2017
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19101-2
ISO/TC 211 Secretariat: SIS
Voting begins on: Voting terminates on:
2017-03-20 2017-06-11
Geographic information — Reference model —
Part 2:
Imagery
Information géographique — Modèle de réference —
Partie 2: Imagerie
ICS: 35.240.70
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
This document is circulated as received from the committee secretariat.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 19101-2:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017

---------------------- Page: 3 ----------------------
oSIST ISO/DIS 19101-2:2017
ISO/DIS 19101-2:2017(E) ISO/DIS 19101-2:2017(E)

Contents Page
Foreword . v
Introduction . vi
1 Scope .1
2 Conformance .1
2.1 General .1
2.2 Enterprise conformance .1
2.3 Sensor conformance .1
2.4 Imagery data conformance .1
2.5 Imagery services conformance .1
2.6 Image processing system conformance .1
3 Normative references .2
4 Terms and definitions .2
5 Abbreviated terms and symbols .8
5.1 Abbreviated terms .8
5.2 Symbols . 10
6 Notation . 10
7 Enterprise viewpoint – community objectives and policies . 11
7.1 General . 11
7.2 Geographic imagery community objective .
...