ISO 6125:1982

Spherical plain radial bearings; joint type — Tolerances

Rotules lisses d'articulation à contact radial — Tolérances

General Information

• Status: Withdrawn
• Publication Date: 28-Feb-1982
• Withdrawal Date: 28-Feb-1982
• ICS: 21.100.10 - Plain bearings
• Technical Committee: ISO/TC 4/SC 7 - Spherical plain bearings
• Drafting Committee: ISO/TC 4/SC 7 - Spherical plain bearings
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 20-Aug-1998

Relations

• Revised: ISO 12240-1:1998 - Spherical plain bearings — Part 1: Radial spherical plain bearings
• Effective Date: 15-Apr-2008
• Revised: SIST ISO 12240-1:2001 - Spherical plain bearings -- Part 1: Radial spherical plain bearings
• Effective Date: 12-May-2008

Standards Content (Sample)

International Standard @ 6125
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONoMEmLIYHAPOL\HAR OPTAHH3AUHR flO CTAHL\APTH3AUHH.ORGANlSATlON INTERNATIONALE DE NORMALISATION
Spherical plain radial bearings; joint type - Tolerances
Rotules lisses d’articulation à contact radial - Tolérances
Second edition - 1982-03-01
Ref. No. IS0 6125-1982 (E)
UDC 621.822.3
Descriptors : bearings, plain bearings, radial bearings, spherical bearings, dimensional tolerances.
n
Price based on 2 pages

---------------------- Page: 1 ----------------------
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards institutes (IS0 member bodies). The work of developing Inter-
national Standards is carried out through IS0 technical committees. Every member
body interested in a subject for which a technical committee has been set up has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council.
International Standard IS0 6125 was developed by Technical Committee ISO/TC 4,
Rolling bearings, and was circulated to the member bodies in December 1980.
It has been approved by the member bodies of the following countries :
Australia Germany, F. R. Poland
Hungary Romania
Austria
Belgium India South Africa, Rep. of
Brazil Italy Spain
Canada Japan Sweden
China Korea, Dem. P. Rep. of Switzerland
Czechoslovakia Korea, Rep. of United Kingdom
Egypt, Arab Rep. of Mexico USA
France Netherlands USSR
No member body expressed disapproval of the document.
IS0 6125-1979).
This second edition cancels and replaces the first edition (i.e.
0 International Organization for Standardization, 1982 O
Printed in Switzerland

---------------------- Page: 2 ----------------------
IS0 6125-1982 (E)
INTERNATIONAL STANDARD
Spherical plain radial bearings; joint type - Tolerances
3 Definitions
1 Scope and field of application
The concepts to which the tolerances specified in this Interna-
This International Standard specifies the tolerances for boun-
dary dimensions (except chamfer dimensions) of spherical plain tional Standard apply are defined in IS0 1132.
radial bearings, joint type, for example the bearings given in
IS0 612411 and IS0 612413.
4 Symbols
Chamfer dimension limits are the same as those given in
nominal bearing bore diameter
IS0 582 for rolling bearings. d=
single plane mean bo
...