ISO/IEC/IEEE 8802-3:2014
(Main)Standard for Ethernet - Part 3:
Standard for Ethernet - Part 3:
ISO/IEC/IEEE 8802-3:2014 specifies Ethernet local area network operation for selected speeds of operation from 1 Mb/s to 100 Gb/s using a common media access control (MAC) specification and management information base (MIB). The Carrier Sense Multiple Access with Collision Detection (CSMA/CD) MAC protocol specifies shared medium (half duplex) operation, as well as full duplex operation. Speed specific Media Independent Interfaces (MIIs) allow use of selected Physical Layer devices (PHY) for operation over coaxial, twisted-pair or fibre-optic cables. System considerations for multisegment shared access networks describe the use of Repeaters that are defined for operational speeds up to 1000 Mb/s. Local Area Network (LAN) operation is supported at all speeds. Other specified capabilities include various PHY types for access networks, PHYs suitable for metropolitan area network applications, and the provision of power over selected twisted-pair PHY types.
Norme pour Ethernet — Partie 3:
General Information
Relations
Frequently Asked Questions
ISO/IEC/IEEE 8802-3:2014 is a standard published by the International Organization for Standardization (ISO). Its full title is "Standard for Ethernet - Part 3:". This standard covers: ISO/IEC/IEEE 8802-3:2014 specifies Ethernet local area network operation for selected speeds of operation from 1 Mb/s to 100 Gb/s using a common media access control (MAC) specification and management information base (MIB). The Carrier Sense Multiple Access with Collision Detection (CSMA/CD) MAC protocol specifies shared medium (half duplex) operation, as well as full duplex operation. Speed specific Media Independent Interfaces (MIIs) allow use of selected Physical Layer devices (PHY) for operation over coaxial, twisted-pair or fibre-optic cables. System considerations for multisegment shared access networks describe the use of Repeaters that are defined for operational speeds up to 1000 Mb/s. Local Area Network (LAN) operation is supported at all speeds. Other specified capabilities include various PHY types for access networks, PHYs suitable for metropolitan area network applications, and the provision of power over selected twisted-pair PHY types.
ISO/IEC/IEEE 8802-3:2014 specifies Ethernet local area network operation for selected speeds of operation from 1 Mb/s to 100 Gb/s using a common media access control (MAC) specification and management information base (MIB). The Carrier Sense Multiple Access with Collision Detection (CSMA/CD) MAC protocol specifies shared medium (half duplex) operation, as well as full duplex operation. Speed specific Media Independent Interfaces (MIIs) allow use of selected Physical Layer devices (PHY) for operation over coaxial, twisted-pair or fibre-optic cables. System considerations for multisegment shared access networks describe the use of Repeaters that are defined for operational speeds up to 1000 Mb/s. Local Area Network (LAN) operation is supported at all speeds. Other specified capabilities include various PHY types for access networks, PHYs suitable for metropolitan area network applications, and the provision of power over selected twisted-pair PHY types.
ISO/IEC/IEEE 8802-3:2014 is classified under the following ICS (International Classification for Standards) categories: 35.110 - Networking. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO/IEC/IEEE 8802-3:2014 has the following relationships with other standards: It is inter standard links to ISO/IEC/IEEE 8802-3:2017, ISO/IEC 8802-3:2000. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO/IEC/IEEE 8802-3:2014 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
INTERNATIONAL ISO/IEC/
STANDARD IEEE
8802-3
First edition
2014-04-01
Standard for Ethernet
Norme pour Ethernet
Reference number
©
IEEE 2012
© IEEE 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from ISO, IEC or IEEE at the respective
address below.
ISO copyright office IEC Central Office Institute of Electrical and Electronics Engineers, Inc.
Case postale 56 3, rue de Varembé 3 Park Avenue, New York
CH-1211 Geneva 20 CH-1211 Geneva 20 NY 10016-5997, USA
Tel. + 41 22 749 01 11 Switzerland E-mail stds.ipr@ieee.org
Fax + 41 22 749 09 47 E-mail inmail@iec.ch Web www.ieee.org
E-mail copyright@iso.org Web www.iec.ch
Web www.iso.org
Published in Switzerland
ii © IEEE 2012 – All rights reserved
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees established
by the respective organization to deal with particular fields of technical activity. ISO and IEC technical
committees collaborate in fields of mutual interest. Other international organizations, governmental and non-
governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO
and IEC have established a joint technical committee, ISO/IEC JTC 1.
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards
through a consensus development process, approved by the American National Standards Institute, which
brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers
are not necessarily members of the Institute and serve without compensation. While the IEEE administers the
process and establishes rules to promote fairness in the consensus development process, the IEEE does not
independently evaluate, test, or verify the accuracy of any of the information contained in its standards.
The main task of ISO/IEC JTC 1 is to prepare International Standards. Draft International Standards adopted
by the joint technical committee are circulated to national bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is called to the possibility that implementation of this standard may require the use of subject matter
covered by patent rights. By publication of this standard, no position is taken with respect to the existence or
validity of any patent rights in connection therewith. ISO/IEEE is not responsible for identifying essential
patents or patent claims for which a license may be required, for conducting inquiries into the legal validity or
scope of patents or patent claims or determining whether any licensing terms or conditions provided in
connection with submission of a Letter of Assurance or a Patent Statement and Licensing Declaration Form, if
any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly
advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is
entirely their own responsibility. Further information may be obtained from ISO or the IEEE Standards
Association.
ISO/IEC/IEEE 8802-3 was prepared by the LAN/MAN Standards Committee of the IEEE Computer Society
(as IEEE 802.3-2012). It was adopted by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 6, Telecommunications and information exchange between systems, in parallel with its
approval by the ISO/IEC national bodies, under the “fast-track procedure” defined in the Partner Standards
Development Organization cooperation agreement between ISO and IEEE. IEEE is responsible for the
maintenance of this document with participation and input from ISO/IEC national bodies.
© IEEE 2012 – All rights reserved iii
(blank page)
iv © IEEE 2012 – All rights reserved
IEEE Standard for Ethernet
IEEE Computer Society
Sponsored by the
LAN/MAN Standards Committee
IEEE
IEEE Std 802.3™-2012
3 Park Avenue
(Revision of
New York, NY 10016-5997
IEEE Std 802.3-2008)
USA
28 December 2012
™
IEEE Std 802.3 -2012
(Revision of
IEEE Std 802.3-2008)
IEEE Standard for Ethernet
Sponsor
LAN/MAN Standards Committee
of the
IEEE Computer Society
Approved 30 August 2012
IEEE-SA Standard Board
Abstract: Ethernet local area network operation is specified for selected speeds of operation from
1 Mb/s to 100 Gb/s using a common media access control (MAC) specification and management
information base (MIB). The Carrier Sense Multiple Access with Collision Detection (CSMA/CD)
MAC protocol specifies shared medium (half duplex) operation, as well as full duplex operation.
Speed specific Media Independent Interfaces (MIIs) allow use of selected Physical Layer devices
(PHY) for operation over coaxial, twisted-pair or fiber optic cables. System considerations for
multisegment shared access networks describe the use of Repeaters that are defined for
operational speeds up to 1000 Mb/s. Local Area Network (LAN) operation is supported at all
speeds. Other specified capabilities include various PHY types for access networks, PHYs
suitable for metropolitan area network applications, and the provision of power over selected
twisted-pair PHY types.
Keywords: 10BASE; 100BASE; 1000BASE; 10GBASE; 40GBASE; 100GBASE; 10 Gigabit
Ethernet; 40 Gigabit Ethernet; 100 Gigabit Ethernet; attachment unit interface; AUI; Auto
Negotiation; Backplane Ethernet; data processing; DTE Power via the MDI; EPON; Ethernet;
Ethernet in the First Mile; Ethernet passive optical network; Fast Ethernet; Gigabit Ethernet; GMII;
information exchange; IEEE 802.3; local area network; management; medium dependent interface;
media independent interface; MDI; MIB; MII; PHY; physical coding sublayer; Physical Layer;
physical medium attachment; PMA; Power over Ethernet; repeater; type field; VLAN TAG; XGMII
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
All rights reserved. Published 28 December 2012. Printed in the United States of America.
IEEE and 802 are registered trademarks in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and
Electronics Engineers, Incorporated.
PDF: ISBN 973-07381-7312-2 STD97287
Print: ISBN 973-07381-7327-6 STDPD97287
IEEE prohibits discrimination, harassment and bullying. For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior
written permission of the publisher.
Notice and Disclaimer of Liability Concerning the Use of IEEE Documents: IEEE Standards documents are
developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association
(IEEE-SA) Standards Board. IEEE develops its standards through a consensus development process, approved by the
American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to
achieve the final product. Volunteers are not necessarily members of the Institute and serve without compensation.
While IEEE administers the process and establishes rules to promote fairness in the consensus development process,
IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the soundness of any
judgments contained in its standards.
Use of an IEEE Standard is wholly voluntary. IEEE disclaims liability for any personal injury, property or other damage,
of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from
the publication, use of, or reliance upon any IEEE Standard document.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and expressly
disclaims any express or implied warranty, including any implied warranty of merchantability or fitness for a specific
purpose, or that the use of the material contained in its standards is free from patent infringement. IEEE Standards
documents are supplied "AS IS."
The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase,
market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint
expressed at the time a standard is approved and issued is subject to change brought about through developments in the
state of the art and comments received from users of the standard. Every IEEE standard is subjected to review at least
every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable
to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are
cautioned to check to determine that they have the latest edition of any IEEE standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for,
or on behalf of, any person or entity. Nor is IEEE undertaking to perform any duty owed by any other person or entity to
another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in
the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional
in determining the appropriateness of a given IEEE standard.
Translations: The IEEE consensus development process involves the review of documents in English only. In the event
that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE
standard.
Official Statements: A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards
Board Operations Manual shall not be considered the official position of IEEE or any of its committees and shall not be
position of IEEE. At lectures, symposia, seminars, or educational
considered to be, nor be relied upon as, a formal
courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be
considered the personal views of that individual rather than the formal position of IEEE.
Comments on Standards: Comments for revision of IEEE Standards documents are welcome from any interested party,
regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice
pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed
change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of
concerned interests, it is important to ensure that any responses to comments and questions also receive the concurrence
of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees
are not able to provide an instant response to comments or questions except in those cases where the matter has
previously been addressed. Any person who would like to participate in evaluating comments or revisions to an IEEE
standard is welcome to join the relevant IEEE working group at http://standards.ieee.org/develop/wg/.
Comments on standards should be submitted to the following address:
Secretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854
USA
Photocopies: Authorization to photocopy portions of any individual standard for internal or personal use is granted by
The Institute of Electrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright
Clearance Center. To arrange for payment of licensing fee, please contact Copyright Clearance Center, Customer
Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any
individual standard for educational classroom use can also be obtained through the Copyright Clearance Center.
Notice to users
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the
provisions of any IEEE standards document does not imply compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Copyrights
This document is copyrighted by the IEEE. It is made available for a wide variety of both public and private
uses. These include both use, by reference, in laws and regulations, and use in private self-regulation,
standardization, and the promotion of engineering practices and methods. By making this document
available for use and adoption by public authorities and private users, the IEEE does not waive any rights in
copyright to this document.
Updating of IEEE documents
Users of IEEE standards should be aware that these documents may be superseded at any time by the
issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect. In order to determine whether
a given document is the current edition and whether it has been amended through the issuance of
amendments, corrigenda, or errata, visit the IEEE-SA website or contact the IEEE at the address listed
previously. For more information about the IEEE Standards Association or the IEEE standards development
process, visit the IEEE-SA website.
Errata
Errata, if any, for this and all other standards can be accessed at the following URL:
http://standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata
periodically.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the
existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has
filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-
SA website http://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate
whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or
under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair
discrimination to applicants desiring to obtain such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not
responsible for identifying Essential Patent Claims for which a license may be required, for conducting
inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or
conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing
agreements are reasonable or nondiscriminatory. Users of this standard are expressly advised that
iv Copyright © 2012 IEEE. All rights reserved.
determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their
own responsibility. Further information may be obtained from the IEEE Standards Association.
Participants
The following individuals were officers of the IEEE 802.3 working group at the beginning of the working
group ballot of this revision:
David J. Law, Working Group Chair
Wael William Diab, Working Group Vice-Chair
Adam Healey, Working Group Secretary
Steven B. Carlson, Working Group Executive Secretary
Valerie Maguire, Working Group Treasurer
Wael William Diab, IEEE P802.3 (802.3bh) Task Force Chair and Chief Editor
Valerie Maguire, IEEE P802.3 (802.3bh) Task Force Recording Secretary and Clause Editor
Peter Anslow, IEEE P802.3 (802.3bh) Task Force Section Editor
Marek Hajduczenia, IEEE P802.3 (802.3bh) Task Force Section Editor
Historical participants
The following individuals participated in the IEEE 802.3 working group during various stages of the
standard’s development. Since the initial publication, many IEEE standards have added functionality or
provided updates to material included in this standard. Included is a historical list of participants who have
dedicated their valuable time, energy, and knowledge to the creation of this material:
Date approved by
IEEE Std 802.3 document Officers at the time of working group ballot
IEEE and ANSI
IEEE Std 802.3-1985, Origi- 23 June 1983 (IEEE) Donald C. Loughry, Working Group Chair
nal 10 Mb/s standard, MAC, 31 December 1984
PLS, AUI, 10BASE5
(ANSI)
IEEE Std 802.3a-1988 15 November 1985 Donald C. Loughry, Working Group Chair
(Clause 10), 10 Mb/s MAU (IEEE) Alan Flatman, Task Force Chair
10BASE2 28 December 1987
(ANSI)
IEEE Std 802.3b-1985 19 September 1985 Donald C. Loughry, Working Group Chair
(Clause 11), 10 Mb/s Broad- (IEEE) Menachem Abraham, Task Force Chair
band MAU, 10BROAD36 28 February 1986 (ANSI)
IEEE Std 802.3c-1985 (9.1– 12 December 1985 Donald C. Loughry, Working Group Chair
9.8), 10 Mb/s Baseband (IEEE) Geoffrey O. Thompson, Task Force Chair
Repeater 4 June 1986 (ANSI)
IEEE Std 802.3d-1987 (9.9), 10 December 1987 Donald C. Loughry, Working Group Chair
10 Mb/s Fiber MAU, FOIRL (IEEE) Steven Moustakas, Task Force Chair
9 February 1989 (ANSI)
IEEE Std 802.3e-1987 11 June 1987 (IEEE) Donald C. Loughry, Working Group Chair
(Clause 12), 1 Mb/s MAU and 15 December 1987 Robert Galin, Task Force Chair
Hub 1BASE5
(ANSI)
IEEE Std 802.3h-1990 28 September 1990 Donald C. Loughry, Working Group Chair
(Clause 5), 10 Mb/s Layer (IEEE) Andy J. Luque, Task Force Chair
Management, DTEs 11 March 1991 (ANSI)
IEEE Std 802.3i-1990 28 September 1990 Donald C. Loughry, Working Group Chair
(Clauses 13 and 14), 10 Mb/s (IEEE) Patricia Thaler, Task Force Chair (initial)
UTP MAU, 10 BASE-T 11 March 1991 (ANSI) Richard Anderson, Task Force Chair (final)
Date approved by
IEEE Std 802.3 document Officers at the time of working group ballot
IEEE and ANSI
IEEE Std 802.3j-1993 15 September 1993 Patricia Thaler, Working Group Chair
(Clauses 15–18), 10 Mb/s (IEEE) Keith Amundsen, Task Force Chair (initial)
Fiber MAUs 15 March 1994 (ANSI) Frederick Scholl, Task Force Chair (final)
10BASE-FP, 10BASE-FB, Michael E. Lee, Technical Editor
and
10BASE-FL
IEEE Std 802.3k-1993 17 September 1992 Patricia Thaler, Working Group Chair
(Clause 19), 10 Mb/s Layer (IEEE) Joseph S. Skorupa, Task Force Chair
Management, Repeaters 8 March 1993 (ANSI) Geoffrey O. Thompson, Vice Chair and Editor
IEEE Std 802.3l-1992 (14.10), 17 September 1992 Patricia Thaler, Working Group Chair
10 Mb/s PICS Proforma (IEEE) Mike Armstrong, Task Force Chair and Editor
10BASE-T MAU 23 February 1993 (ANSI) Paul Nikolich, Vice Chair
William Randle, Editorial Coordinator
IEEE Std 802.3m-1995, 21 September 1995 Patricia Thaler, Working Group Chair
Maintenance 2 (IEEE) Gary Robinson, Maintenance Chair
16 July 1996 (ANSI)
IEEE Std 802.3n-1995, 21 September 1995 Patricia Thaler, Working Group Chair
Maintenance 3 (IEEE) Gary Robinson, Maintenance Chair
4 April 1996 (ANSI)
IEEE Std 802.3p-1993 17 June 1993 (IEEE) Patricia Thaler, Working Group Chair
(Clause 20), Management, 10 4 January 1994 (ANSI) Joseph S. Skorupa, Task Force Chair
Mb/s Integrated MAUs Geoffrey O. Thompson, Vice Chair and Editor
IEEE Std 802.3q-1993 17 June 1993 (IEEE) Patricia Thaler, Working Group Chair
(Clause 5), 10 Mb/s Layer 4 January 1994 (ANSI) Joseph S. Skorupa, Task Force Chair
Management, GDMO Format Geoffrey O. Thompson, Vice Chair and Editor
IEEE Std 802.3r-1996 (8.8), 29 July 1996 (IEEE) Patricia Thaler, Working Group Chair
Type 10BASE5 Medium 6 January 1997 (ANSI) Imre Juhász, Task Force Chair
Attachment Unit PICS William Randle, Task Force Editor
proforma
IEEE Std 802.3s-1995, 21 September 1995 Geoffrey O. Thompson, Working Group Chair
Maintenance 4 (IEEE) Gary Robinson, Maintenance Chair
8 April 1996 (ANSI)
IEEE Std 802.3t-1995, 120 Ω 14 June 1995 (IEEE) Geoffrey O. Thompson, Working Group Chair
informative annex to 12 January 1996 (ANSI) Jacques Christ, Task Force Chair
10BASE-T
IEEE Std 802.3u-1995 14 June 1995 (IEEE) Geoffrey O. Thompson, Working Group Chair
(Clauses 21–30), Type 4 April 1996 (ANSI) Peter Tarrant, Task Force Chair (Phase 1)
100BASE-T MAC parame- Howard Frazier, Task Force Chair (Phase 2)
ters, Physical Layer, MAUs, Paul Sherer, Task Force Editor-in-Chief (Phase 1)
and Repeater for 100 Mb/s Howard Johnson, Task Force Editor-in-Chief (Phase 2)
Operation Colin Mick, Task Force Comment Editor
IEEE Std 802.3v-1995, 150 Ω 12 December 1995 Geoffrey O. Thompson, Working Group Chair
informative annex to (IEEE) Larry Nicholson, Task Force Chair
10BASE-T 16 July 1996 (ANSI)
IEEE Std 802.3x-1997 and 20 March 1997 (IEEE) Geoffrey O. Thompson, Working Group Chair
IEEE Std 802.3y-1997 (Revi- 5 September 1997 (ANSI) David J. Law, Working Group Vice Chair
sions to IEEE Std 802.3, Rich Seifert, Task Force Chair and Editor (802.3x)
Clauses 31 and 32), Full- J. Scott Carter, Task Force Chair (802.3y)
Duplex Operation and Type Colin Mick, Task Force Editor (802.3y)
100BASE-T2
IEEE Std 802.3z-1998 25 June 1998 (IEEE) Geoffrey O. Thompson, Working Group Chair
(Clauses 34–39, 41–42), Type David J. Law, Working Group Vice Chair
1000BASE-X MAC Parame- Howard M. Frazier, Jr., Task Force Chair
ters, Physical Layer, Repeater, Howard W. Johnson, Task Force Editor
and Management Parameters
for 1000 Mb/s Operation
IEEE Std 802.3aa-1998, 25 June 1998 (IEEE) Geoffrey O. Thompson, Working Group Chair
Maintenance 5 Colin Mick, Task Force Editor
vi Copyright © 2012 IEEE. All rights reserved.
Date approved by
IEEE Std 802.3 document Officers at the time of working group ballot
IEEE and ANSI
IEEE Std 802.3ab-1999 26 June 1999 (IEEE) Geoffrey O. Thompson, Working Group Chair
(Clause 40), Physical Layer David J. Law, Working Group Vice Chair
Parameters and Specifications Robert M. Grow, Working Group Secretary
for 1000 Mb/s Operation Over George Eisler, Task Force Chair
4 Pair of Category 5 Balanced Colin Mick, Task Force Editor
Copper Cabling, Type
1000BASE-T
IEEE Std 802.3ac-1998, 16 September 1998 Geoffrey O. Thompson, Working Group Chair
Frame Extensions for Virtual (IEEE) David J. Law, Working Group Vice Chair
Bridged Local Area Network Andy J. Luque, Working Group Secretary
(VLAN) Tagging on IEEE Ian Crayford, Task Force Chair
802.3 Networks Rich Seifert, Task Force Editor
IEEE Std 802.3ad-2000 30 March 2000 (IEEE) Geoffrey O. Thompson, Working Group Chair
(Clause 43), Aggregation of David J. Law, Working Group Vice Chair
Multiple Link Robert M. Grow, Working Group Secretary
Segments Steven Haddock, Task Force Chair
Tony Jeffree, Task Force Co-Editor
Rich Seifert, Task Force CoEditor
IEEE Std 802.3-2002 14 January 2002 (IEEE) Geoffrey O. Thompson, Working Group Chair
(IEEE 802.3ag, Maintenance David J. Law, Working Group Vice Chair
6, Revision of the base), Car- Robert M. Grow, Working Group Secretary
rier Sense Multiple Access
with Collision Detection
(CSMA/CD) access method
and Physical Layer
specifications
IEEE Std 802.3ae-2002, 13 June 2002 (IEEE) Geoffrey O. Thompson, Working Group Chair
(Clauses 44–53) Media David J. Law, Working Group Vice Chair
Access Control (MAC) Robert M. Grow, Working Group Secretary
Parameters, Physical Layers, R. Jonathan Thatcher, Task Force Chair
and Management Parameters Stephen Haddock, Task Force Vice Chair
for 10 Gb/s Operation Bradley J. Booth, Task Force Editor
Lacreshia Laningham, Task Force Assistant Editor
Benjamin Brown, Logic Track Chair
Walter Thirion, Optical Track Chair
IEEE Std 802.3af-2003, 12 June 2003 (IEEE) Geoffrey O. Thompson, Working Group Chair (Phase 1)
(Clause 33) Data Terminal Robert M. Grow, Working Group Chair (Phase 2)
Equipment (DTE) Power via David J. Law, Working Group Vice Chair
Media Dependent Interface Robert M. Grow, Working Group Secretary (Phase 1)
(MDI) Steven B. Carlson, Working Group Secretary (Phase 2)
Steven B. Carlson, Task Force Chair
Michael S. McCormack, Task Force Editor (Phase 1)
John J. Jetzt, Task Force Editor (Phase 2)
Chad M. Jones, Task Force Comment Editor
IEEE Std 802.3ah-2004, 6 April 2005 (IEEE) Robert M. Grow, Working Group Chair
Media Access Control Param- David J. Law, Working Group Vice Chair
eters, Physical Layers, and Steven B. Carlson, Working Group Secretary
Management Parameters for Howard Frazier, Task Force Chair
Subscriber Access Networks Wael W. Diab, Task Force Editor-in-Chief
Hugh Barrass, Task Force Vice-Chair
Scott Simon, Task Force Recording Secretary
Behrooz Rezvani, Task Force Executive Secretary
IEEE Std 802.3aj-2003, 11 September 2003 Robert M. Grow, Working Group Chair
Maintenance 7 (IEEE) David J. Law, Working Group Vice Chair, Task Force Chair
Steven B. Carlson, Working Group Secretary
Catherine K. N. Berger, Task Force Editor
IEEE Std 802.3ak-2004, Phys- 9 February 2004 (IEEE) Robert M. Grow, Working Group Chair
ical Layer and Management David J. Law, Working Group Vice Chair
Parameters for 10Gb/s Opera- Steven B. Carlson, Working Group Secretary
tion, Type 10GBASE-CX4 Daniel J. Dove, Task Force Chair
Howard A. Baumer, Task Force Editor
Date approved by
IEEE Std 802.3 document Officers at the time of working group ballot
IEEE and ANSI
IEEE Std 802.3-2005 9 June 2005 (IEEE) Robert M. Grow, Working Group Chair
(IEEE 802.3REVam, Revi- David J. Law, Working Group Vice Chair
sion of the base), Carrier Wael W. Diab, Secretary
Sense Multiple Access with Steven B. Carlson, Working Group Executive Secretary
Collision Detection Piers Dawe, Review Editor
(CSMA/CD) access method
and Physical Layer
specifications
IEEE Std 802.3an-2006, Phys- 8 June 2006 (IEEE) Robert M. Grow, Working Group Chair
ical Layer and Management David J. Law, Working Group Vice Chair
Parameter for 10 Gb/s Opera- Wael William Diab, Working Group Secretary
tion, Type 10GBASE-T Steven B. Carlson, Working Group Executive Secretary
Bradley Booth, Task Force Chair
Sanjay Kasturia, Task Force Editor-in Chief
George Eisler, Task Force Recording Secretary
IEEE Std 802.3ap-2007, 22 March 2007 (IEEE) Robert M. Grow, Working Group Chair
Ethernet Operation over David J. Law, Working Group Vice-Chair
Electrical Backplanes Wael W. Diab, Working Group Secretary
Steven B. Carlson, Working Group Executive Secretary
Bradley Booth, Working Group Treasurer
Adam Healey, Task Force Chair
John D’Ambrosia, Task Force Secretary
Schelto vanDoorn, Task Force Editor-in-Chief (Phase 1)
Ilango S. Ganga, Task Force Editor-in-Chief (Phase 2)
IEEE Std 802.3aq-2006, Phys- 15 September 2006 Robert M. Grow, Working Group Chair
ical Layer and Management (IEEE) David J. Law, Working Group Vice Chair
Parameters for 10 Gb/s Opera- Wael William Diab, Working Group Secretary
tion, Type 10GBASE-LRM Steven B. Carlson, Working Group Executive Secretary
David G. Cunningham, Task Force Chair
Nick Weiner, Task Force Editor
Piers Dawe, Task Force Contributing Editor
15 September 2006 Robert M. Grow, Working Group Chair
IEEE Std 802.3as-2006,
(IEEE) David J. Law, Working Group Vice Chair
Frame format extensions
Wael William Diab, Working Group Secretary
Steven B. Carlson, Working Group Executive Secretary
Kevin Q Daines, Task Force Chair
Glenn W. Parsons, Task Force Editor
IEEE Std 802.3-2005/Cor 1- 8 June 2006 (IEEE) Robert M. Grow, Working Group Chair
2006 (IEEE 802.3au), DTE David J. Law, Working Group Vice Chair, Task Force Editor
Power via MDI Isolation cor- Wael W. Diab, Working Group Secretary
rigendum Steven B. Carlson, Working Group Executive Secretary
IEEE Std 802.3-2005/Cor 2- 7 June 2007 (IEEE) Robert M. Grow, Working Group Chair
2007 (IEEE 802.3aw), David J. Law, Working Group Vice Chair, Task Force Editor
10GBASE-T corrigendum Wael W. Diab, Working Group Secretary
Steven B. Carlson, Working Group Executive Secretary
Bradley Booth, Working Group Treasurer
IEEE Std 802.3-2008 26 September 2008 Robert M. Grow, Working Group Chair
(IEEE 802.3ay), Maintenance (IEEE) David J. Law, Working Group Vice Chair, Task Force Editor
#9 (Revision of the base), Wael William Diab, Working Group Secretary
Carrier Sense Multiple Access Steven B. Carlson, Working Group Executive Secretary
with Collision Detection Bradley Booth, Working Group Treasurer
(CSMA/CD) access method
and Physical Layer
specifications
11 September 2009 David J. Law, Working Group Chair
IEEE Std 802.3at-2009 Data
(IEEE) Wael William Diab, Working Group Vice Chair
Terminal Equipment (DTE)
Adam Healey, Working Group Secretary
Power via the Media Depen-
Steven B. Carlson, Working Group Executive Secretary
dent Interface (MDI)
Bradley Booth, Working Group Treasurer
Enhancements
Mike McCormack, Task Force Chair
D. Matthew Landry, Task Force Chief Editor
Chad Jones, Task Force Comment Editor
viii Copyright © 2012 IEEE. All rights reserved.
Date approved by
IEEE Std 802.3 document Officers at the time of working group ballot
IEEE and ANSI
IEEE Std 802.3av-2009 Phys- 11 September 2009 David J. Law, Working Group Chair
ical Layer Specifications and (IEEE) Wael William Diab, Working Group Vice Chair
Management Parameters for Adam Healey, Working Group Secretary
10 Gb/s Passive Optical Net- Steven B. Carlson, Working Group Executive Secretary
works Bradley Booth, Working Group Treasurer
Glen Kramer, Task Force Chair
Duane Remein, Task Force Chief Editor
Marek Hajduczenia, Task Force Assistant Editor
IEEE Std 802.3az-2010 Media 30 September 2010 David J. Law, Working Group Chair
Access Control Parameters, (IEEE) Wael William Diab, Working Group Vice Chair
Physical Layers, and Manage- Steven B. Carlson, Working Group Executive Secretary
ment Parameters for Energy- Adam Healey, Working Group Secretary
Efficient Ethernet Bradley Booth, Working Group Treasurer
Michael Bennett, Task Force Chair
Sanjay Kasturia, Task Force Editor-in-Chief
IEEE Std 802.3ba Media 17 June 2010 (IEEE) David J. Law, Working Group Chair
Access Control Parameters, Wael William Diab, Working Group Vice-Chair
Physical Layers, and Manage- Steven B. Carlson, Working Group Executive Secretary
ment Parameters for 40 Gb/s Adam Healey, Working Group Secretary
and 100 Gb/s Operation Bradley Booth, Working Group Treasurer
John D’Ambrosia, Task Force Chair
Ilango S. Ganga, Task Force Editor-in-Chief
IEEE Std 802.3-2008/Cor 1- 9 December 2009 (IEEE) David J. Law, Working Group Chair
2009 (IEEE 802.3bb) Pause Wael William Diab, Working Group Vice-Chair
Reaction Delay Corrigendum. Steven B. Carlson, Working Group Executive Secretary
Adam Healey, Working Group Secretary
Bradley Booth, Working Group Treasurer
IEEE Std 802.3bc-2009 Ether- 11 September 2009 David J. Law, Working Group Chair and Task Force Editor
net Organizationally Specific (IEEE) Wael W. Diab, Working Group Vice Chair, Task Force Chair
Type, Length, Value (TLVs) Steven B. Carlson, Working Group Executive Secretary
Adam Healey, Working Group Secretary
Bradley Booth, Working Group Treasurer
IEEE Std 802.3bd-2011 MAC 16 June 2011 (IEEE) Tony Jeffree, IEEE 802.1 Working Group Chair
Control Frame for Priority- Paul Congdon, IEEE 802.1 Working Group Vice Chair
based Flow Control David J. Law, IEEE 802.3 Working Group Chair
Wael W. Diab, IEEE 802.3 Working Group Vice Chair
Pat Thaler, Data Center Bridging Task Group Chair
IEEE Std 802.3bf-2011 Media 16 May 2011 (IEEE) David J. Law, Working Group Chair
Access Control (MAC) Ser- Wael William Diab, Working Group Vice-Chair
vice Interface and Manage- Adam Healey, Working Group Secretary
ment Parameters to Support Steven B. Carlson, Working Group Executive Secretary
Time Synchronization Proto- Valerie Maguire, Working Group Treasurer
cols Steven B. Carlson, Task Force Chair
Marek Hajduczenia, Task Force Editor-in-Chief
IEEE Std 802.3bg-2011 Phys- 31 March 2011 (IEEE) David J. Law, Working Group Chair
ical Layer and Management Wael William Diab, Working Group Vice-Chair
Parameters for Serial 40 Gb/s Adam Healey, Working Group Secretary
Ethernet Operation Over Sin- Steven B. Carlson, Working Group Executive Secretary
gle-Mode Fiber Valerie Maguire, Working Group Treasurer
Mark Nowell, Task Force Chair
Pete Anslow, Task Force Editor-in-Chief
Ali Abaye
Phil L. Arst James Binder Maurice Caldwell
Fazal Abbas Doug Artman Larry Birenbaum Richard Cam
Ghani Abbas
Jean-Pierre Astorg Jeff E. Bisberg Bob Campbell
John S. Abbott
Mehran Ataee Michel Bohbot Peter Campbell
Justin Abbott Ilan Atias Mark Bohrer Robert R. Campbell
Hamlet Abedmamoore
Steve Augusta Jean-Michel Bonnamy Luigi Canavese
Joe Abler
Phil Auld Bradley J. Booth James T. Carlo
Menachem Abraham Siamack Ayandeh Paul Booth Craig Carlson
Shadi AbuGhazaleh
Kameran Azadet Paul Bottorff Steven B. Carlson
Martin Adams Joseph N. Babanezhad Thomas J. Boucino Dan Carnine
Luc Adriaennsens Chet Babla Samuel Bourche J. Martin Carroll
Don Aelmore
Gerard E. Bachand David Bourque J. Scott Carter
Puneet Agarwal Guna Bala Gary Bourque Andrew Castellano
Akira Agata R. V. Balakrishnam Sidney Bouzaglo Ron Cates
Oscar Agazzi Koussalya Balasubramanian
Kirk Bovill Jeffrey D. Catlin
John R. Agee Vittal Balasubramanian John Bowerman Mandeep Chadha
Andy Baldman
Nand Aggarwal Richard Bowers David Chalupsky
Paul Ahrens Thananya Baldwin
Peter Bradshaw Edward Chang
Youichi Akasaka Keith Balmer Al Braga Edward G. Chang
Vish Akella Mogens Cash Balsby Richard Brand Edward S. Chang
Bruce Bandali
Reza Alavi Rudolf Brandner Frank Chang
Alan Albrecht Jaya Bandyopadhyay Ralf-Peter Braun Justin Chang
Keith Albright Majid Barazande-Pour Richard S. Brehove Kiwon Chang
Ozdal Barkan
Don Alderrou Dirk Breuer Luke Chang
Jan Alexander Ian Barker Steve Brewer Samuel Chang
Thomas Alexander Eyal Barnea Robert F. Bridge Sun-Hyok Chang
Barry Barnett
Abe Ali Vince Bridgers Thomas Chantrell
Brad Allen Jim Barnette Dave Brier Howard Charney
David Allen Hugh Barrass Andrew Brierley-Green Jian Chen
Bob Barrett
John Allen Rhett Brikovskis Xiaopeng Chen
Zehavit Alon Scott Barrick Charles Brill Zinan (Nan) Chen
Arne Alping Meir Bartur Robert D. Brink Linda Cheng
Yoram Barzilai
Michael Altman Rick Brooks Weiying Cheng
Yehuda Alush Howard Baumer Alan M. Brown Kok-Wui Cheong
Karen Amavisca Denis Beaudoin Benjamin Brown Giovanni Cherubini
Michaël Beck
Andrew Ambrose Daniel J. Brown Rao Cherukuri
Khaled Amer Jonathan Beckwith Dave Brown Albert Chiang
Nitish Amin Christian Beia Jack Brown David Chin
Keith Amundsen Edward Beili Kevin Brown Hon Wah Chin
Ole Christian Andersen Alexei Beliaev Matthew Brown Jae hun Cho
Arlan J. Anderson William Belknap Suzy Brown Francis Choi
Eric Anderson Eran Bello Phillip Brownlee Jin-Seek Choi
Jon Anderson Yakov Belopolsky Brian Brunn Rahul Chopra
Paul Anderson Randy J. Below Robert Brunner Joseph Chou
Richard Anderson Vincent Bemmel Steve F. Buck Golam Choudhury
Stephen D. Anderson Michael Bennett Lisa Buckman Jacky Chow
Stephen J. Anderson Richard Bennett Mark Bugg Kuen Chow
Henry Choy
Tony Anderson Miles Benson Juan Bulnes
Ralph Andersson Sidney Berglund Bill Bunch Chris Christ
Jack S. Andresen Ernest E. Bergmann James Burgess Jacques Christ
George Chu
Peter Anslow April Bergstrom Scott Burton
Ekkehard Antz David J. Berman Robert A. Busse Hwan-Seok Chung
Ken-ichi Arai Roberto Bertoldi Thomas T. Butler Yue-Der Chzh
Bert Armijo John L. Bestel Roy Bynum Albert Claessen
Mike Armstrong Dave Bethune Ed Cady Guss Claessen
Susie Armstrong Vipul Bhatt Luca Cafiero G. J. Clancy
Brian Arnold Sudeep Bhoja John Cagle Brice Clark
Lewis B. Aronson Harmeet Bhugra Jeffrey C. Cain Susan Roden Clarke
Simcha Aronson Jan Bialkowski Donald Caldwell George Claseman
x Copyright © 2012 IEEE. All rights reserved.
Terry Cobb Richard Froke
Bernard O. Debbasch Herman Eiliya
Michael Coden Michael deBie George Eisler Ingrid Fromm
Kelly B. Coffey
Tom Debiec Martin Elhøj Richard Frosch
Larry Cohen Hongyan Fu
John DeCramer David Elie-Dit-Cosaque
Christopher R. Cole Joel Dedrick Kevin M. Elliff Judy Fuess
Doug Coleman
Steve Deffley Michael Elswick Yukihiro Fujimoto
Régis Colla
Dave Delaney Paul "Skip" Ely Atsuhisa Fukuoka
Kevin Cone Moshe De-Leon Richard Ely John Fuller
Herbert V. Congdon
Bill Delveaux Kent English Darrell Furlong
Paul Congdon Ralph DeMent Gregory Ennis Mel Gable
Patrick Conlon Joe DeNicholas Gianfranco Enrico Robert D Gaglianello
Don Connor
Tazio M. DeNicolo Brian S. Ensign Justin Gaither
Robert Conte Sanjay Desai Norman Erbacher Robert Galin
Charles I. Cook Claudio Desanti Tooraj Esmailian Sharad Gandhi
Ronald J. Cooper
Peter Desaulniers Nick Esser Tom Gandy
Stephen Cooper Mark Devon Daniel Essig Ilango S. Ganga
Neil Coote Sanjay Dhawan David Estes Robin Gangopadhya
Edward Cornejo
Chris Di Minico Judith Estrin Xiao Ming Gao
Ronald Crane Wael William Diab Jim Everitt Clete Gardenhour
George Cravens Patrick Diamond Steve Evitts Geoffrey M. Garner
Ian Crayford Erik Dickens John F. Ewen Denton Gentry
John Creigh Bryan Dietz Richard Fabbri John George
J. Francois Crepin Chris DiMinico Siavash Fallahi Floyd H. Gerhardt
Bill Cronin Thomas J. Dineen Sabina Fanfoni Keith Gerhardt
Peter Cross Zhemin Ding Janos Farkas Mark Gerhold
Richard Cross Sean Dingman Rebecca Farley Anoop Ghanwani
Brian Cruikshank Thuyen Dinh Donald Fedyk Ali Ghiasi
Diego Crupnicoff Hans Peter Dittler Eldon Feist Sajol Ghoshal
Dimitrios Giannakopoulos
Kai Cui Hamish Dobson Daniel Feldman
Dongning Feng Giorgio Giaretta
David Cullerot David W. Dolfi
Chris Cullin Mark Donhowe Feifei (Felix) Feng Pat Gilliland
David G. Cunningham Hank (H. N.) Dorris Severn Ferdun George Ginis
Jean-Loup Ferrant Joel Goergen
Joe Curcio Daniel Dove
Robert A. Curtis James Doyle Mark Feuerstraeter Franz Goetz
Simon Cushin Daniel S. Draper Jens Fiedler Adi Golbert
Julien Fiere Glenn Golden
Dariush Dabiri Scott Dredge
Robert Dahlgren Brian Drever Dave Fifield Moty Goldis
Saleem Dahmouh Steve Dreyer Norival Figueira Matthew Goldman
Juan Figueroa Timothy D. Goodman
Fumio Daido John Dring
Bernard Daines Michael Dudek Robert G. Finch Steve Goody
Kevin Q Daines Marcus Duelk Norman Finn Rich Graham
Farzin Firoozmand Russ Granger
John Dallesasse Richard Dugan
John D'Ambrosia Raymond S. Duley David Fischer Eric B. Grann
Nabil Damouny Linda Dunbar Thomas Fischer Tom Grasmehr
John Fitzgerald C. Thomas Gray
Rupert S. Dance Joseph E. Dupuis
Mark Darby Marc R. Dupuis Alan Flatman Eric Gray
Yair Darshan David Dwelley Steve Flickinger Larry Green
Martin Green
Peter Dartnell J. Craig Easley Norbert Folkens
Subrata Datta Paul Eastman Christian G. Folting Jonathan E. Greenlaw
John Davidson Jeff Ebeling Harry Forbes Bryan Gregory
David Davies Peter Ecclesine Brian Ford Richard Grenier
Edward Davis Edward J. Eckert Richard Fransen Karanvir Grewal
Peter Dawe Clay Eddings Roger Fraser Michael R. Grimwood
Piers Dawe Phil Edholm Howard M. Frazier Edward Grivna
John De Andrea Tom Edsall Robert Frazier Robert M. Grow
Kathryn de Graaf Dean Edwards Ladd Freitag Robert Gudz
Gerald de Grace Gareth Edwards Ken Friedenbach Andreas Gulle
Michael de la Garrigue Frank J. Effenberger Scott Fritz Karunakar Gulukota
Moshe De Leon John Egan Krister Frojdh Ajay Gummalla
Richard Gumpertz Harold W. Katz
Susan Hennenfent Woo-Hyuk Jang
Craig Gunther Ken Herrity Stephen Janshego Boris Katzenberg
Bin Guo
Pierre Herve Jonathan Jedwab Dave Kaufman
Sandeep Gupta Sumesh Kaul
James H. Hesson Tony Jeffree
Sudhir Gupta John Hickey George D. Jelatis Yasuaki Kawatsu
Tanmay Gupta
Chip Hicks Ernie Jensen Kevin Kayser
Mitch Gusat
Tetsuya Higuchi John J. Jetzt Hal Keen
Jonas Gustafsson Olli-Pekka Hiironen Jack L. Jewell Paul Kellam
Mark Gustlin
John Hill Pankaj Jha N. Patrick Kelly
Paul J. Gyugyi Tricia Hill Jessica Xin Jiang Joe Kennedy
Russ Gyurek Sammy Hindi Qiaofeng Jiang John J. Kenny
Steven Haas
William Hingston Wenbin Jiang Scott Kesler
Michael Hackert Henry Hinrichs Ni Jie Dawson Kesling
Tariq Haddad David Hinzel Andrew C. Jimenez Lior Khermosh
Stephen Haddock
Kengo Hirano Robert Jin Tuan Khuu
Atikem Haile-Mariam Ryan Hirth Thomas K. Joergensen Gary Kidwell
Marek Hajduczenia Charlie Hochstedler Clarence Joh Keti Kilcrease
Sharam Hakimi
Charles Hoffner Michael D. Johas Teener Bob Kilgore
Clive Hallatt Jay Hoge Richard John Chan Kim
Hiroshi Hamano Brian Holden Donald C. Johnson Dae Young Kim
Farid Hamidy Bryan Hoover Howard Johnson Jin H. Kim
Kevin Hamilton Gregory Hopkins Mize Johnson Seung-Hwan Kim
Bernie Hammond Keith Hopwood Scott Johnson Su-Hyung Kim
Benny Hanigal Rita Horner Cristopher Jolly Yongbum Kim
Greg Hankins Steven E. Horowitz Chad M. Jones Marc Kimpe
G. Y. Hanna Michael Horvat Nick Jones Mitsunobu Kimura
Chris Hansen Yoshifumi Hotta William W. Jones John Kincaid
Johannes Hansen Stanley Hronik Ulf Jonsson Bill Kind
Mogens Hansen Henry Hsiaw Bheom-Soon Joo Jonathan P. King
Seong-Soon Joo
Del Hanson Jacob Hsu Neal King
Onn Haran Fred Huang Anthony Jordan Scott G. Kipp
Hacene Hariti Xi Huang Thomas K. Jørgensen Paul Kish
Juan Jover
Guy Harkins Charles Hudson Tadayoshi Kitayama
Milton C. Harper Chuck Hudson Imre Juhász Philippe Klein
Doug Harshbarger Todd Hudson Jason Julyan Richard Knight
Kwi-Yung Jung
G. R. Hartley Michael Hughes Mike Ko
Lloyd Hasley Walter K. Hurwitz Dieter W. Junkers Hiroshi Kobayashi
Marwan Hassoun Dean Huumala Paul Jury Shoukei Kobayashi
David Kabal
Mehdi Hatamian Thong Huynh Satoshi Kodama
W. B. Hatfield David W. Hyer Jayant Kadambi Henriecus Koeman
Tom Hatley Haruhiko Ichino Vic Kairis David J. Koenen
Shinkyo Kaku
Stephen Haughey Hiroki Ikeda Christine Koenig
Haw Ming Haung Nicholas Ilyadis Omer Kal David E. Kohl
Kirk Hayden James Innis Mohan Kalkunte Srinivas Kola
Amrit Kalla
Claude Hayek Romain Insler Paul F. Kolesar
Robert Hays Kazuhiko Ishibe Joel S. Kalman Steven Koller
Carl G. Hayssen Osamu Ishida Matt Kaltenbach Kishan Rao Konda
Asif Hazarika Hideki Isono Puru Kamat Masashi Kono
Adam Healey Hirotake Iwadate Ron Kao David Kooistra
Jeffrey Heath Steve Jackson Hadriel Kaplan Derek Koonce
Gaby Hecht Krista S Jacobsen Rainer Kaps Paul Kopera
Jim Heckroth Michael R. Jacobson Roger Karam Leonid Koshevoy
Chris Heegard Mike Jacobson Abhay Karandikar Josef Kosilek
Gopal Hegde Ajit Jadeja Jaime Kardontchik Donald E. Kotas
Wolfgang Heidasch John M. Jaeger Yuji Kasai William F. Kous
Ronen Heldman Brent Jaffa Allen Kasey Tetsu Koyama
David Hel
...
INTERNATIONAL ISO/IEC/
STANDARD IEEE
8802-3
First edition
2014-04-01
Standard for Ethernet
Norme pour Ethernet
Reference number
©
IEEE 2012
This CD-ROM contains the publication ISO/IEC/IEEE 8802-3:2014 in portable document format (PDF), which
can be viewed using Adobe® Acrobat® Reader.
Adobe and Acrobat are trademarks of Adobe Systems Incorporated.
This first edition of ISO/IEC/IEEE 8802-3:2014 cancels and replaces ISO/IEC 8802-3:2000, which has been
technically revised.
© IEEE 2012
All rights reserved. Unless required for installation or otherwise specified, no part of this CD-ROM may be reproduced, stored in a retrieval
system or transmitted in any form or by any means without prior permission in writing from ISO, IEC or IEEE at the respective address
below.
ISO copyright office IEC Central Office Institute of Electrical and Electronics Engineers, Inc.
Case postale 56 3, rue de Varembé 3 Park Avenue, New York
CH-1211 Geneva 20 CH-1211 Geneva 20 NY 10016-5997, USA
Switzerland Switzerland Internet stds.ipr@ieee.org
Internet copyright@iso.org Internet inmail@iec.ch
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
Published in Switzerland
ii © IEEE 2012 – All rights reserved
Installation
If this publication has been packaged as a zipped file, do NOT open the file from the CD-ROM, but copy it to
the desired location in your local environment. Once the file has been copied to your local environment, open
the f
...










Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...