ISO/IEC PRF 23773-1

Information technology — User interfaces for automatic simultaneous interpretation systems — Part 1: General

Technologies de l'information — Interfaces utilisateur pour les systèmes d'interprétation simultanée automatique — Partie 1: Généralités

General Information

• Status: Not Published
• ICS: 35.240.30 - IT applications in information, documentation and publishing
• Technical Committee: ISO/IEC JTC 1/SC 35 - User interfaces
• Drafting Committee: ISO/IEC JTC 1/SC 35 - User interfaces
• Current Stage: 5020 - FDIS ballot initiated: 2 months. Proof sent to secretariat
• Completion Date: 16-May-2024

Standards Content (Sample)

International
Standard
ISO/IEC 23773-1
First edition
Information technology —
User interfaces for automatic
simultaneous interpretation
systems —
Part 1:
General
Technologies de l'information — Interfaces utilisateur pour les
systèmes d'interprétation simultanée automatique —
Partie 1: Généralités
PROOF/ÉPREUVE
Reference number
ISO/IEC 23773-1:2024(en) © ISO/IEC 2024

---------------------- Page: 1 ----------------------
ISO/IEC 23773-1:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
PROOF/ÉPREUVE
© ISO/IEC 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/IEC 23773-1:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 2
5 General description of automatic simultaneous interpretation . 2
6 Service flows and scenarios of automatic simultaneous interpretation systems . 2
6.1 Service situations .2
6.2 Service flows and scenarios .4
7 General functions of automatic simultaneous interpretation systems . 5
Bibliography . 7
PROOF/ÉPREUVE
© ISO/IEC 2024 – All rights reserved
iii

---------------------- Page: 3 ----------------------
ISO/IEC 23773-1:2024(en)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations,
governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/
IEC Directives, Part 2 (see www.iso.org/directives or www.iec.ch/members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implement
...

ISO/IEC DIS PRF 23773-1:2023(E)
Date: 2023-01
ISO /IEC JTC 1/SC 35/WG 5
Secretariat: AFNOR
Date: 2024-05-16
Information technology — User interfaces for automatic
simultaneous interpretation systems — —
Part 1:
General
Technologies de l'information — Interfaces utilisateur pour les systèmes d'interprétation simultanée
automatique —
Partie 1: Généralités
FDIS stage

---------------------- Page: 1 ----------------------
ISO/IEC DIS PRF 23773-1:2023(E2024(en)
© ISO 2023/IEC 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Fax: [phone]
EmailE-mail: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2023 – All rights reserved
© ISO/IEC 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/IEC DIS PRF 23773-1:2023(E2024(en)
Contents
Foreword . iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 2
5 General description of automatic simultaneous interpretation . 2
6 Service flows and scenarios of automatic simultaneous interpretation systems . 4
6.1 Service situations . 4
6.2 Service flows and scenarios . 7
7 General functions of automatic simultaneous interpretation systems . 8
Bibliography . 11


© ISO/IEC 2023 – All rights reserved iii
© ISO/IEC 2024 – All rights reserved
iii

---------------------- Page: 3 ----------------------
ISO/IEC DIS PRF 23773-1:2023(E2024(en)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members
of ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC
Directives, Part 2 (see www.iso.org/directives or www.iec.ch/members_experts/refdocs).
Attention is drawnISO and IEC draw attention to the possibility that some of the elementsimplementation of
this document may beinvolve the subjectuse of (a) patent(s). ISO and IEC take no position concerning the
evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of publication
of this document, ISO and IEC had not received notice of (a) patent(s) which may be required to implement
this document. However, implementers are cautioned that this may not represent the latest information,
which may be obtained from
...