iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 7268:1983/Amd 1:1984

(Amendment)

Pipe components — Definition of nominal pressure — Amendment 1

Pipe components — Definition of nominal pressure — Amendment 1

The amendment refers to clause 2 'definition' and states: delete the text and substitute: nominal pressure (PN): A numerical designation which is a convenient round number for reference purposes. All equipent of the same nominal size (DN) designated by the same PN number shall have compatible mating dimensions. Gives additionally two notes.

Tuyauterie — Définition de la pression nominale — Amendement 1

Cevne komponente - Definicija imenskega tlaka - Dopolnilo 1

General Information

Status
Published
Publication Date
30-Jun-1984
ICS
23.040.01 - Pipeline components and pipelines in general
Technical Committee
ISO/TC 5/SC 10 - Metallic flanges and their joints
Drafting Committee
ISO/TC 5/SC 10 - Metallic flanges and their joints
Current Stage
6060 - International Standard published
Completion Date
01-Jul-1984
Ref Project
SIST ISO 7268:2001/AMD 1:2001 - Pipe components - Definition of nominal pressure - Amendment 1

Relations

Child
ISO 7268:1983 - Pipe components — Definition of nominal pressure
Effective Date
15-Apr-2008
Child
SIST ISO 7268:2001 - Pipe components -- Definition of nominal pressure
Effective Date
12-May-2008
Amends
ISO 7268:1983 - Pipe components — Definition of nominal pressure
Effective Date
06-Jun-2022

Buy Standard

ISO 7268:1983/Amd 1:1984ISO 7268:1983/Amd 1:1984
PreviousNext
Standard
ISO 7268:1983/Amd 1:1984
English language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 7268:1983/Amd 1:1984ISO 7268:1983/Amd 1:1984
PreviousNext
Standard
ISO 7268:1983/Amd 1:1984
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 7268:1983/Amd 1:1984ISO 7268:1983/Amd 1:1984
PreviousNext
Standard
ISO 7268:1983/Amd 1:1984
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 7268:2001/AMD 1:2001ISO 7268:2001/AMD 1:2001
PreviousNext
Amendment
ISO 7268:2001/AMD 1:2001
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

INTERNATIONAL STANDARD IS0 7268=1983/AMENDMENT 1
Published 1984-07-15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEX~YHAPO~HAR OPTAHM3AUMR IlO CTAH~APTM3AlJ4WORGANlSATlON INTERNATIONALE DE NORMALISATION
Pipe components - Definition of nominal pressure
AMENDMENT 1
Tu yau terie - DMnition de la pression nominale
Amendement 7
Amendment 1 to International Standard IS0 72684973 was developed by Technical Committee ISO/TC 5, Ferrous metalpipes and
metalljc fittings. It was submitted directly to the IS0 Council, in accordance with clause 6.11.2, part 1 of the Directives for the
technical work of /SO.
Page I
Clause 2 Definition
Delete the text and substitute :
nominal pressure (PN) : A numerical designation which is a convenient r
...

NORME INTERNATIONALE ISO 7268=1983/AMENDEMENT 1
Publié 1984-07-15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEX)(nYHAPO~HAR OPrAHM3ALJMfl fl0 CTAH~APTM3AL&lM~RGANISATION INTERNATIONALE DE NORMALISATION
Tuyauterie - Définition de la pression nominale
AMENDEMENT 1
Pipe components - Definition of nominal pressure
Amendment 7
L’Amendement 1 à la Norme internationale BO 72684983 a été élaboré par le comité technique ISO/TC 5, Tuyauteries en métaux
ferreux et raccords méta//iques. II a été soumis directement au Conseil de I’ISO, conformément au paragraphe 6.11.2, partie 1 des
Directives pour les travaux techniques de NSO.
Page 1
Chapitre 2 Définition
I
Remplacer le texte par le suivant :
pression nominale (PN) : Désignation numérique exprimée par un nombre arrondi utilisé à des fins de références.
Tous les équipements
...

NORME INTERNATIONALE ISO 7268=1983/AMENDEMENT 1
Publié 1984-07-15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEX)(nYHAPO~HAR OPrAHM3ALJMfl fl0 CTAH~APTM3AL&lM~RGANISATION INTERNATIONALE DE NORMALISATION
Tuyauterie - Définition de la pression nominale
AMENDEMENT 1
Pipe components - Definition of nominal pressure
Amendment 7
L’Amendement 1 à la Norme internationale BO 72684983 a été élaboré par le comité technique ISO/TC 5, Tuyauteries en métaux
ferreux et raccords méta//iques. II a été soumis directement au Conseil de I’ISO, conformément au paragraphe 6.11.2, partie 1 des
Directives pour les travaux techniques de NSO.
Page 1
Chapitre 2 Définition
I
Remplacer le texte par le suivant :
pression nominale (PN) : Désignation numérique exprimée par un nombre arrondi utilisé à des fins de références.
Tous les équipements
...

SLOVENSKI STANDARD
SIST ISO 7268:2001/AMD 1:2001
01-september-2001
Cevne komponente - Definicija imenskega tlaka - Dopolnilo 1
Pipe components - Definition of nominal pressure - Amendment 1
Ta slovenski standard je istoveten z: ISO 7268:1983/Amd 1:1984
ICS:
23.040.01 Deli cevovodov in cevovodi Pipeline components and
na splošno pipelines in general
SIST ISO 7268:2001/AMD 1:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 7268:2001/AMD 1:2001

---------------------- Page: 2 ----------------------

SIST ISO 7268:2001/AMD 1:2001
INTERNATIONAL STANDARD IS0 7268=1983/AMENDMENT 1
Published 1984-07-15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEX~YHAPO~HAR OPTAHM3AUMR IlO CTAH~APTM3AlJ4WORGANlSATlON INTERNATIONALE DE NORMALISATION
Pipe components - Definition of nominal pressure
AMENDMENT 1
Tu yau terie - DMnition de la pression nominale
Amendement 7
Amendment 1 to International Standard IS0 72684973 was developed by Technical
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 6708:1995(Main)
Pipework components — Definition and selection of DN (nominal size)
SIST ISO 6708:1995

Cancels and replaces the first edition (1980). Gives the definition of DN (nominal size) when applied to components of a pipework system, as specified in those standards which use the DN designation system. Gives a list of preferred DN values.

  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
ISO
ISO 7268:1983(Main)
Pipe components — Definition of nominal pressure
SIST ISO 7268:2001

Gives the definition of nominal pressure when applied to components fo a metallic piping system, and states two series of PN ratings for use with these components.

  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
ISO
ISO 4981:2023(Main)
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water — Boxes used for retention, detention, storage and transportation systems — Specifications for storm water boxes made of PE, PP and PVC-U

This document gives the definitions and specifies the minimum requirements for injection moulded, extruded, compression moulded and thermoformed thermoplastics cuboid shaped boxes, including integral components, used in underground systems for retention, detention, storage and transportation of non-potable water (e.g. storm water) and manufactured from polyethylene (PE), polypropylene (PP) or unplasticized polyvinylchloride (PVC-U). The boxes are intended for buried underground use, e.g. in landscape, pedestrian or vehicular traffic areas. In the case of retention and detention systems, the main purpose of the boxes is to retain water, for later infiltration in the ground or for later use in non-potable applications (irrigation, cleaning, sanitary facilities, etc.) or to retain water during a storm, transferring it in a controlled way to the public storm water network. Applications include commercial, residential, agricultural and highway drainage, including installation under parking lots and roadways. Product performance is determined by a combination of material specification, product design and manufacturing process. A box can either be factory-assembled or site-assembled from different components. The boxes are intended to be used as elements in a modular system where the manufacturer has provided a clearly documented method specifying how the components are assembled to create a complete retention, detention, storage and transportation system. The boxes are installed as one or more horizontal layers on a firm foundation and embedded with fill around and above the complete system. NOTE Non-load bearing component(s) can be manufactured by various methods (e.g. extrusion, injection moulding, rotational moulding, compression moulded, thermoforming and low-pressure injection moulding) and are not within the scope of this document.

  • Standard
    16 pages
    English language
    sale 15% off
  • Draft
    17 pages
    English language
    sale 15% off
ISO
ISO/PAS 22101-1:2022(Main)
Polyethylene reinforced with short glass fibres (PE-sGF) piping systems for industrial applications — Part 1: General

This document specifies the general aspects of short glass fibre reinforced polyethylene (PE-sGF) piping systems, manufactured by the spiral cross winding method, which are used below ground for the conveyance of liquid fluids for the following industrial and agricultural uses: — chemical plants; — industrial sewerage engineering; — power engineering (cooling and general-purpose water supply); — agricultural production plants; — water treatment; — small hydraulic power plants (general-purpose water supply). In conjunction with the other parts of the ISO 22101 series, this document applies to PE-sGF pipes, fittings and their joints with each other, with other PE-sGF components, and to components from other materials intended for use under the following conditions: a) allowable operating pressure (PFA) up to and including 25 bar[1]; b) operating temperature of 20 °C as the reference temperature. NOTE For other operating temperatures, guidance is given in Annex A. Other application areas differing from those listed in the scope can be permitted if the requirements of this document and/or relevant national requirements are taken into account. Drinking water applications are outside the scope of this document. This document covers only PE-sGF using glass fibre with lengths comprised in the range between 3 mm and 5 mm. Components conforming to any of the documents listed in the Bibliography or to national standards, as applicable, can be used with components conforming to this document, provided that they conform to the requirements for joint dimensions and to the relevant requirements of this document. [1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

  • Technical specification
    19 pages
    English language
    sale 15% off
  • Technical specification
    16 pages
    English language
    sale 15% off
ISO
ISO/PAS 22101-2:2022(Main)
Polyethylene reinforced with short glass fibres (PE-sGF) piping systems for industrial applications — Part 2: Pipes

This document is applicable to short glass fibre reinforced polyethylene (PE-sGF) pipes manufactured by the spiral cross winding method, which are used below ground for the conveyance of liquid fluids for the following industrial and agricultural uses: — chemical plants; — industrial sewerage engineering; — power engineering (cooling and general-purpose water supply); — agricultural production plants; — water treatment. — small hydraulic power plants (general-purpose water supply); In conjunction with the other parts of the ISO 22101 series, this document applies to PE-sGF pipes, fittings and their joints with each other, with other PE-sGF components, and to components from other materials intended for use under the following conditions: a) allowable operating pressure (PFA) up to and including 25 bar[1]; b) operating temperature of 20 °C as the reference temperature. NOTE For other operation temperatures, guidance is given in ISO/PAS 22101-1:2022, Annex A. Other application areas differing from those listed in the scope can be permitted if the requirements of this document and/or relevant national requirements are taken into account. Drinking water applications are outside the scope of this document. This document is applicable to pipes with an inside diameter of 200 mm to 1 000 mm with integrated socket and spigot fusion joint. Components conforming to any of the documents listed in the Bibliography or to national standards, as applicable, can be used with components conforming to this document, provided that they conform to the requirements for joint dimensions and to the relevant requirements of this document. [1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

  • Technical specification
    20 pages
    English language
    sale 15% off
  • Technical specification
    21 pages
    English language
    sale 15% off
ISO
ISO 11295:2022(Main)
Plastics piping systems used for the rehabilitation of pipelines — Classification and overview of strategic, tactical and operational activities

This document specifies the steps of the overall process of pipeline rehabilitation, comprising: — information on strategic and tactical activities: a) investigation and condition assessment of the existing pipeline; b) pipeline rehabilitation planning. — information on and requirements for operational activities: c) project specification; d) applications of techniques; e) documentation of the design and application process. Definitions and classification of families of renovation and trenchless replacement techniques are provided, and their respective features described. Areas of application covered include underground drainage and sewerage networks and underground water and gas supply networks. The following aspects are not covered by the scope of this document: — new construction provided as network extensions; — calculation methods to determine, for each viable technique, the characteristics of lining or replacement pipe material needed to secure the desired performance of the rehabilitated pipeline; — techniques providing non-structural pressure pipe liners; — techniques for local repair. It is the responsibility of the designer to choose and design the renovation or trenchless replacement pipeline system.

  • Standard
    67 pages
    English language
    sale 15% off
  • Standard
    72 pages
    French language
    sale 15% off
  • Draft
    67 pages
    English language
    sale 15% off
  • Draft
    72 pages
    French language
    sale 15% off
ISO
ISO 22391-5:2009/Amd 1:2020(Amendment)
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system — Amendment 1
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Draft
    3 pages
    English language
    sale 15% off
ISO
ISO 15494:2015/Amd 1:2020(Amendment)
Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system — Amendment 1
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Draft
    2 pages
    English language
    sale 15% off
  • Draft
    2 pages
    French language
    sale 15% off
ISO
ISO 10802:2020(Main)
Ductile iron pipelines — Hydrostatic testing after installation

This document specifies site hydrostatic acceptance tests for installed pressure and non-pressure ductile iron pipelines used for conveying water and other liquids. It does not cover testing of pipelines for gas. NOTE In this document, all pressures are relative pressures expressed in bars, where 1 bar = 0,1 MPa.

  • Standard
    20 pages
    English language
    sale 15% off
  • Draft
    19 pages
    English language
    sale 15% off
ISO
ISO/TS 22391-7:2018(Main)
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 7: Guidance for the assessment of conformity

This document gives requirements and guidance for the assessment of conformity of materials, products, and assemblies in accordance with the applicable part(s) of ISO 22391 intended to be included in the manufacturer's quality plan as part of the quality management system and for the establishment of certification procedures. NOTE In order to help the reader, a basic test matrix is given in Annex A. In conjunction with the other parts of ISO 22391 (see Foreword), this document is applicable to polyethylene of raised temperature resistance (PE-RT) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures appropriate to the class of application (see ISO 22391-1:2009, Table 1).

  • Technical specification
    16 pages
    English language
    sale 15% off