ISO 11007-1:2021/PRF Amd 1

Petroleum products and lubricants — Determination of rust-prevention characteristics of lubricating greases — Part 1: Dynamic wet conditions — Amendment 1: Test bearings

Produits pétroliers et lubrifiants — Détermination des caractéristiques antirouille des graisses lubrifiantes — Partie 1: Conditions dynamiques humides — Amendement 1: Roulements d'essai

General Information

• Status: Not Published
• ICS: 75.100 - Lubricants, industrial oils and related products
• Technical Committee: ISO/TC 28 - Petroleum and related products, fuels and lubricants from natural or synthetic sources
• Drafting Committee: ISO/TC 28 - Petroleum and related products, fuels and lubricants from natural or synthetic sources
• Current Stage: 5020 - FDIS ballot initiated: 2 months. Proof sent to secretariat
• Completion Date: 13-Mar-2023

Relations

• Amends: ISO 11007-1:2021 - Petroleum products and lubricants — Determination of rust-prevention characteristics of lubricating greases — Part 1: Dynamic wet conditions
• Effective Date: 27-Aug-2022

Standards Content (Sample)

DRAFT AMENDMENT
ISO 11007-1:2021/DAM 1
ISO/TC 28 Secretariat: NEN
Voting begins on: Voting terminates on:
2022-11-17 2023-02-09
Petroleum products and lubricants — Determination of
rust-prevention characteristics of lubricating greases —
Part 1:
Dynamic wet conditions
AMENDMENT 1: Test bearings
ICS: 75.100
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
This document is circulated as received from the committee secretariat.
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 11007-1:2021/DAM 1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 1 ----------------------
ISO 11007-1:2021/DAM 1:2022(E)
DRAFT AMENDMENT
ISO 11007-1:2021/DAM 1
ISO/TC 28 Secretariat: NEN
Voting begins on: Voting terminates on:
Petroleum products and lubricants — Determination of
rust-prevention characteristics of lubricating greases —
Part 1:
Dynamic wet conditions
AMENDMENT 1: Test bearings
ICS: 75.100
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
THEREFORE SUBJECT TO CHANGE AND MAY
This document is circulated as received from the committee secretariat.

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

NOT BE REFERRED TO AS AN INTERNATIONAL

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.

the internet or an intranet, without prior written permission. Permission can be requested from either ISO at

...

PROJET D’AMENDEMENT
ISO 11007-1:2021/DAM 1
ISO/TC 28 Secrétariat: NEN
Début de vote: Vote clos le:
2022-11-17 2023-02-09
Produits pétroliers et lubrifiants — Détermination des
caractéristiques antirouille des graisses lubrifiantes —
Partie 1:
Conditions dynamiques humides
AMENDEMENT 1: Roulements d'essai

Petroleum products and lubricants — Determination of rust-prevention characteristics of lubricating

greases —
Part 1: Dynamic wet conditions
AMENDMENT 1: Test bearings
ICS: 75.100
CE DOCUMENT EST UN PROJET DIFFUSÉ POUR
OBSERVATIONS ET APPROBATION. IL EST DONC
SUSCEPTIBLE DE MODIFICATION ET NE PEUT
ÊTRE CITÉ COMME NORME INTERNATIONALE
AVANT SA PUBLICATION EN TANT QUE TELLE.

Le présent document est distribué tel qu’il est parvenu du secrétariat du comité.

OUTRE LE FAIT D’ÊTRE EXAMINÉS POUR
ÉTABLIR S’ILS SONT ACCEPTABLES À DES
FINS INDUSTRIELLES, TECHNOLOGIQUES ET
COMMERCIALES, AINSI QUE DU POINT DE VUE
DES UTILISATEURS, LES PROJETS DE NORMES
INTERNATIONALES DOIVENT PARFOIS ÊTRE
CONSIDÉRÉS DU POINT DE VUE DE LEUR
POSSIBILITÉ DE DEVENIR DES NORMES
POUVANT SERVIR DE RÉFÉRENCE DANS LA
RÉGLEMENTATION NATIONALE.
Numéro de référence
LES DESTINATAIRES DU PRÉSENT PROJET ISO 11007-1:2021/DAM 1:2022(F)
SONT INVITÉS À PRÉSENTER, AVEC LEURS
OBSERVATIONS, NOTIFICATION DES DROITS
DE PROPRIÉTÉ DONT ILS AURAIENT
ÉVENTUELLEMENT CONNAISSANCE ET À
© ISO 2022
FOURNIR UNE DOCUMENTATION EXPLICATIVE.
---------------------- Page: 1 ----------------------
ISO 11007-1:2021/DAM 1:2022(F)
ISO/TC 28
ISO 11007-1:2021/DAM 1:2022(F)
Secrétariat: NEN
Produits pétroliers et lubrifiants - Détermination des
caractéristiques antirouille des graisses lubrifiantes - Partie 1 :
Conditions dynamiques humides
AMENDEMENT 1: Roulements d’essai

Petroleum products and lubricants — Determination of rust-prevention characteristics of

lubricating greases — Part 1: Dynamic wet conditions
AMENDMENT 1: Test bearings
ICS : 75.100
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2022

Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune p

...