ISO/IEC/IEEE 8802-3:2017/Amd 9:2018

Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 3: Standard for Ethernet — Amendment 9: Physical layer specifications and management parameters for 1000 Mb/s operation over plastic optical fiber

Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Prescriptions spécifiques — Partie 3: Norme pour Ethernet — Amendement 9: Titre manque

General Information

• Status: Withdrawn
• Publication Date: 23-Oct-2018
• ICS: 35.110 - Networking
• Technical Committee: ISO/IEC JTC 1/SC 6 - Telecommunications and information exchange between systems
• Drafting Committee: ISO/IEC JTC 1/SC 6 - Telecommunications and information exchange between systems
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 23-Feb-2021

Relations

• Revised: ISO/IEC/IEEE 8802-3:2021 - Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 3: Standard for Ethernet
• Effective Date: 23-Apr-2020
• Amends: ISO/IEC/IEEE 8802-3:2017 - Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 3: Standard for Ethernet
• Effective Date: 14-Jul-2018

Standards Content (Sample)

INTERNATIONAL
ISO/IEC/IEEE
STANDARD
8802-3
Second edition
2017-03-01
AMENDMENT 9
2018-10
Information technology —
Telecommunications and information
exchange between systems — Local
and metropolitan area networks —
Specific requirements —
Part 3:
Standard for Ethernet
AMENDMENT 9: Physical layer
specifications and management
parameters for 1000 Mb/s operation
over plastic optical fiber
Technologies de l'information — Télécommunications et échange
d'information entre systèmes — Réseaux locaux et métropolitains —
Prescriptions spécifiques —
Partie 3: Norme pour Ethernet
AMENDEMENT 9
Reference number
ISO/IEC/IEEE 8802-3:2017/Amd.9:2018(E)
©
 IEEE 2017

---------------------- Page: 1 ----------------------
ISO/IEC/IEEE 8802-3:2017/Amd.9:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© IEEE 2017
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO or IEEE at
the respective address below or ISO’s member body in the country of the requester.
ISO copyright office Institute of Electrical and Electronics Engineers, Inc
CP 401 • Ch. de Blandonnet 8 3 Park Avenue, New York
CH-1214 Vernier, Geneva NY 10016-5997, USA
Phone: [phone]
Fax: [phone]
Email: [e-mail] Email: [e-mail]
Website: www.iso.org Website: www.ieee.org
Published in Switzerland
© IEEE 2017 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/IEC/IEEE 8802-3:2017/Amd.9:2018(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees established
by the respective organization to deal with particular fields of technical activity. ISO and IEC technical
committees collaborate in fields of mutual interest. Other international organizations, governmental and
non‐governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of
ISO documents should be noted (see www.iso.org/directives).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards
through a consensus development process, approved by the American National Standards Institute, which
brings together volunteers representing varied viewpoints and interests to achieve the final product.
Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE
administers the process and establishes rules to promote fairness in the consensus development process, the
IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its
standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on the ISO
list of patent declarations received (see www.iso.org/patents) or the IEC list of patent declarations received
(see http://patents.iec.ch).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT) see: www.iso.org/iso/foreword.html.
ISO/IEC/IEEE 8802‐3:2017/Amd.9 was prepared by the LAN/MAN of the IEEE Computer Society (as
IEEE Std 802.3bv‐2017) and drafted in accordance with its editorial rules. It was adopted, under the “fast-
track procedure” defined in the Partner Standards Development Organization cooperation agreement
between ISO and IEEE, by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC
6, Telecommunications and information exchange between systems.
A list of all parts in the ISO/IEC/IEEE 8802 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
© IEEE 2017 – All rights reserved
iii

---------------------- Page: 3 ----------------------
IEEE Std 802.3bv™-2017
(Amendment to
IEEE Std 802.3™-2015
as amended by
IEEE Std 802.3bw™-2015,
IEEE Std 802.3by™-2016,
IEEE Std 802.3bq™-2016,
IEEE Std 802.3bp™-2016,
IEEE Std 802.3br™-2016,
IEEE Std 802.3bn™-2016,
IEEE Std 802.3bz™-2016, and
IEEE Std 802.3bu™-2016)
IEEE Standard for Ethernet
Amendment 9: Physical Layer Specifications and
Management Parameters for 1000 Mb/s Operation
Over Plastic Optical Fiber
LAN/MAN Standards Committee
of the
IEEE Computer Society
Approved 14 February 2017
IEEE-SA Standards Board

---------------------- Page: 4 ----------------------
ISO/IEC/IEEE 8802-3:2017/Amd.9:2018(E)
Abstract: A family of three point-to-point physical layers (PHYs) for 1000 Mb/s operation over
duplex plastic optical fiber (POF) and related management parameters are specified by this
amendment to IEEE Std 802.3-2015.
Keywords: 1000BASE-H, 1000BASE-RHA, 1000BASE-RHB, 1000BASE-RXC, amendment,
BASE-H, EEE, Energy Efficient Ethernet, IEEE 802.3™, IEEE 802.3bv™, PCS, Physical Coding
Sublayer, Physical Medium Attachment sublayer, Physical Medium Dependent sublayer, plastic
optical fiber, PMA, PMD, POF
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2017 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 14 March 2017. Printed in the United States of America.
IEEE and 802 are registered trademarks in the U.S. Patent & Trademark Office, owned by The Institute of
Electrical and Electronics Engineers, Incorporated.
Print: ISBN 978-5044-3721-9 STD22413
PDF: ISBN 978-1-5044-3722-6 STDPD22413
IEEE prohibits discrimination, harassment, and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.
2
Copyright © 2017 IEEE. All rights reserved.
© IEEE 2017 – All rights reserved

---------------------- Page: 5 ----------------------
ISO/IEC/IEEE 8802-3:2017/Amd.9:2018(E)
Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These notices
and disclaimers, or a reference to this page, appear in all standards and may be found under the heading
“Important Notice” or “Important Notices and Disclaimers Concerning IEEE Standards Documents.”
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are
developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards
Association (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a
consensus development process, approved by the American National Standards Institute (“ANSI”), which
brings together volunteers representing varied viewpoints and interests to achieve the final product.
Volunteers are not necessarily members of the Institute and participate without compensation from IEEE.
While IEEE administers the process and establishes rules to promote fairness in the consensus development
process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the
soundness of any judgments contained in its standards.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and
expressly disclaims all warranties (express, implied and statutory) not included in this or any other
document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness
for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of
material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.
IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to
the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and
issued is subject to change brought about through developments in the state of the art and comments
received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his
or her own independent judgment in the exercise of reasonable care in any given circumstances or, as
appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE
standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO:
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON
ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
3
Copyright © 2017 IEEE. All rights reserved.
© IEEE 2017 – All rights reserved

---------------------- Page: 6 ----------------------
ISO/IEC/IEEE 8802-3:2017/Amd.9:2018(E)
Translations
The IEEE consensus development process involves the review of documents in English only. In the event
that an IEEE standard is translated, only the English version published by IEEE should be considered the
approved IEEE standard.
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that his or her views should be considered the personal views of that individual rather than the
formal position of IEEE.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE. However, IEEE does not provide consulting information or advice
pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a
proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a
consensus of concerned interests, it is important that any responses to comments and questions also receive
the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and
Standards Coordinating Committees are not able to provide an instant response to comments or questions
except in those cases where the matter has previously been addressed. For the same reason, IEEE does not
respond to interpretation requests. Any person who would like to participate in revisions to an IEEE
standard is welcome to join the relevant IEEE working group.
Comments on standards should be submitted to the following address:
Secretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the
provisions of any IEEE Standards document does not imply compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, IEEE does not waive any rights in copyright to the
documents.
4
Copyright © 2017 IEEE. All rights reserved.
© IEEE 2017 – All rights reserved

---------------------- Page: 7 ----------------------
ISO/IEC/IEEE 8802-3:2017/Amd.9:2018(E)
Photocopies
Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to
photocopy portions of any individual standard for company or organizational internal use or individual, non-
commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center,
Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; [phone]. Permission to
photocopy portions of any individual standard for educational classroom use can also be obtained through
the Copyright Clearance Center.
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time
by the issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years
old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of
some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that
they have the latest edition of any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended
through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http://
standards.ieee.org or contact IEEE at the address listed previously. For more information about the IEEE SA
or IEEE’s standards development process, visit the IEEE-SA Website at http://standards.ieee.org.
Errata
Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http://
standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata
periodically.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the
existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has
filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-
SA Website at http://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate
whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or
under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair
discrimination to applicants desiring to obtain such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not
responsible for identifying Essential Patent Claims for which a license may be required, for conducting
inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or
conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing
agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that
determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their
.
own responsibility. Further information may be obtained from the IEEE Standards Association
5
Copyright © 2017 IEEE. All rights reserved.
© IEEE 2017 – All rights reserved

---------------------- Page: 8 ----------------------
ISO/IEC/IEEE 8802-3:2017/Amd.9:2018(E)
Participants
The following individuals were officers and members of the IEEE 802.3 Working Group at the beginning of
the IEEE P802.3bv Working Group ballot. Individuals may have not voted, voted for approval, disapproval,
or abstained on this amendment.
David J. Law, IEEE 802.3 Working Group Chair
Adam Healey, IEEE 802.3 Working Group Vice-Chair
Pete Anslow, IEEE 802.3 Working Group Secretary
Steven B. Carlson, IEEE 802.3 Working Group Executive Secretary
Valerie Maguire, IEEE 802.3 Working Group Treasurer
Robert M. Grow, IEEE P802.3bv GEPOF Task Force Chair
Rubén Pérez-Aranda, IEEE P802.3bv GEPOF Task Force Editor
David Abramson Dan Dove Michael Klempa
Shadi Abughazaleh Mike Dudek Shigeru Kobayashi
Nick Duer
Dale Amason Keisuke Kojima
J. Michael Andrewartha Frank Effenberger Paul Kolesar
Eric Baden Hesham Elbakoury Tom Kolze
Amrik Bains David Estes Glen Kramer
Hans Lackner
Thananya Baldwin John Ewen
Dave Dwelley Jeffrey Lapak
Denis Beaudoin
Christian Beia Ramin Farjad Mark Laubach
Michael Bennett Shahar Feldman David Lewis
Jon Lewis
Vipul Bhatt German Feyh
Alan Flatman William Lo
William Bliss
Brad Booth Matthias Fritsche Miklos Lukacs
Kent Lusted
Martin Bouda Richard Frosch
Jeffery Maki
Ralf-Peter Braun Andy Gardner
Ali Ghiasi David Malicoat
Theodore Brillhart
James Malkemus
Paul Brooks Joel Goergen
Yonatan Malkiman
Matthew Brown Steven Gorshe
Arthur Marris
Jairo Bustos Heredia James Graba
Takeo Masuda
Adrian Butter Mark Gustlin
Kirsten Matheus
Juan-Carlos Calderon Marek Hajduczenia
Erdem Matoglu
J. Martin Carroll Bernie Hammond
Laurence Matola
Clark Carty Takehiro Hayashi
Brett McClellan
Craig Chabot Yasuo Hidaka
Thomas McDermott
Geoffrey Chacon Simon Brian Holden
John McDonough
Mandeep Chadha Rita Horner
Richard Mei
David Chalupsky Bernd Horrmeyer
Richard Mellitz
Jacky Chang Victor Hou
Bryan Moffitt
Xin Chang Yasuhiro Hyakutake
Ardeshir Mohammadian
Ahmad Chini Hideki Isono
Leo Montreuil
Keng Hua Chuang Tom Issenhuth
Paul Mooney
Peter Cibula Kenneth Jackson
Dale Murray
Christopher R. Cole Andrew Jimenez
Henry Muyshondt
Shaoan Dai Chad Jones
Edward Nakamoto
John D’Ambrosia Peter Jones
Gary Nicholl
Yair Darshan Manabu Kagami
Paul Nikolich
Piers Dawe
Upen Kareti
Kevin Noll
Wael Diab Keisuke Kawahara
Mark Nowell
Eric DiBiaso Yasuaki Kawatsu
David Ofelt
Daniel Dillow Michael Kelsen
Tom Palkert
Chris Diminico
Yong Kim
Hui Pan
Thuyen Dinh Jonathan King
Sesha Panguluri
Curtis Donahue Scott Kipp
Carlos Pardo
6
Copyright © 2017 IEEE. All rights reserved.
© IEEE 2017 – All rights reserved

---------------------- Page: 9 ----------------------
ISO/IEC/IEEE 8802-3:2017/Amd.9:2018(E)
Petar Pepeljugoski Ramin Shirani Stephen Trowbridge
Gerald Pepper Tom Skaar Yoshihiro Tsukamoto
Michael Peters Jeff Slavick Mike Tu
Rick Pimpinella Scott Sommers Sterling A. Vaden
William Powell Tom Souvignier Stefano Valle
Richard Prodan Edward Sprague Paul Vanderlaan
Rick Rabinovich Peter Stassar Robert Wagner
Adee Ran Robert Stone Roy Wang
Alon Regev Junqing Sun Xinyuan Wang
Duane Remein Steve Swanson Matthias Wendt
Victor Renteria Andre Szczepanek Oded Wertheim
Martin Rossbach William Szeto Martin White
Christopher Roth Bharat Tailor Natalie Wienckowski
Salvatore Rotolo Akio Tajima Ludwig Winkel
Vineet Salunke Takayuki Tajima Peter Wu
Sam Sambasivan Satoshi Takahashi Yu Xu
Edward Sayre Kohichi Tamura Jun Yi
Dieter Schicketanz Alexander Tan Lennart Yseboodt
Mehmet Tazebay Ting-Fa Yu
Fred Schindler
Peter Scruton Brian Teipen Hayato Yuki
Hossein Sedarat Geoffrey Thompson Andrew Zambell
Naoshi Serizawa Pirooz Tooyserkani Yan Zhuang
Megha Shanbhag Albert Tretter George Zimmerman
Stephen Shellhammer Helge Zinner
7
Copyright © 2017 IEEE. All rights reserved.
© IEEE 2017 – All rights reserved

---------------------- Page: 10 ----------------------
ISO/IEC/IEEE 8802-3:2017/Amd.9:2018(E)
The following members of the individual balloting committee voted on this standard. Balloters may have
voted for approval, disapproval, or abstention.
Thomas Alexander Manabu Kagami Carlos Pardo
Piotr Karocki
Richard Alfvin Bansi Patel
Carol Ansley Keisuke Kawahara
Arumugam Paventhan
Peter Anslow Stuart Kerry Ruben Pérez-Aranda
Butch Anton Tomohiro Kikuta Michael Peters
Stefan Aust Yongbum Kim Rick Pimpinella
Yoshitada Beppu Shigeru Kobayashi Adee Ran
Ralf-Peter Braun Peter Kroeplin Alon Regev
Nancy Bravin Mark Laubach Maximilian Riegel
Theodore Brillhart David J. Law
Benjamin Rolfe
Jairo Bustos Heredia David Lewis Osman Sakr
William Byrd Jon Lewis Frank Schewe
Steven B. Carlson Arthur H. Light Dieter Schicketanz
Juan Carreon Michael Lynch Thomas Starai
Keith Chow Elvis Maculuba Peter Stassar
Charles Cook Valerie Maguire Jan Streibel
Matthias Fritsche Jeffery Maki
Walter Struppler
Yukihiro Fujimoto Arthur Marris Mitsutoshi Sugawara
Joel Goergen Naoki Matsuda Bo Sun
Volker Goetzfried Mick McCarthy Junqing Sun
Randall Groves Brett McClellan Satoshi Takahashi
Robert M. Grow Thomas McDermott Yoshihiro Tsukamoto
Takehiro Hayashi Richard Mellitz Mark-Rene Uchida
Adam Healey Tremont Miao
Sterling Vaden
Marco Hernandez Jeffrey Moore Paul Vanderlaan
Werner Hoelzl Charles Moorwood Dmitri Varsanofiev
Koji Horiguchi Matthew Mora Prabodh Varshney
Rita Horner Jose Morales George Vlantis
Yasuhiro Hyakutake Henry Muyshondt Khurram Waheed
Tadahisa Iikubo Michael Newman Stephen Webb
Noriyuki Ikeuchi
Nick S. A. Nikjoo Ludwig Winkel
Masanori Ishikawa Paul Nikolich Tomonari Yoshimura
Atsushi Ito Satoshi Obara Oren Yuen
Raj Jain Akimitsu Okita Hayato Yuki
Michael Johas Teener Thomas Palkert Zhen Zhou
8
Copyright © 2017 IEEE. All rights reserved.
© IEEE 2017 – All rights reserved

---------------------- Page: 11 ----------------------
ISO/IEC/IEEE 8802-3:2017/Amd.9:2018(E)
When the IEEE-SA Standards Board approved this standard on 14 February 2017, it had the following
membership:
Jean-Philippe Faure, Chair
Vacant Position, Vice Chair
John D. Kulick, Past Chair
Konstantinos Karachalios, Secretary
Chuck Adams Thomas Koshy Robby Robson
Masayuki Ariyoshi Joseph L. Koepfinger*
Dorothy Stanley
Ted Burse Kevin Lu
Adrian Stephens
Stephen Dukes Daleep Mohla
Mehmet Ulema
Damir Novosel
Doug Edwards
Phil Wennblom
Ronald C. Petersen
J. Travis Griffith
Howard Wolfman
Annette D. Reilly
Gary Hoffman
Yu Yuan
Michael Janezic
*Member Emeritus
9
Copyright © 2017 IEEE. All rights reserved.
© IEEE 2017 – All rights reserved

---------------------- Page: 12 ----------------------
ISO/IEC/IEEE 8802-3:2017/Amd.9:2018(E)
Introduction
This introduction is not part of IEEE Std 802.3bv-2017, IEEE Standard for Ethernet—Amendment 9: Physical Layer
Specifications and Management Parameters for 1000 Mb/s Operation Over Plastic Optical Fiber
IEEE Std 802.3™ was first published in 1985. Since the initial publication, many projects have added func-
tionality or provided maintenance updates to the specifications and text included in the standard. Each IEEE
802.3 project/amendment is identified with a suffix (e.g., IEEE Std 802.3ba™-2010).
The half duplex Media Access Control (MAC) protocol specified in IEEE Std 802.3-1985 is Carrier Sense
Multiple Access with Collision Detection (CSMA/CD). This MAC protocol was key to the experimental
Ethernet developed at Xerox Palo Alto Research Center, which had a 2.94 Mb/s data rate. Ethernet at
10 Mb/s was jointly released as a public specification by Digital Equipment Corporation (DEC), Intel and
Xerox in 1980. Ethernet at 10 Mb/s was approved as an IEEE standard by the IEEE Standards Board in 1983
and subsequently published in 1985 as IEEE Std 802.3-1985. Since 1985, new media options, new speeds of
operation, and new capabilities have been added to IEEE Std 802.3. A full duplex MAC protocol was added
in 1997.
Some of the major additions to IEEE Std 802.3 are identified in the marketplace with their project number.
This is most common for projects adding higher speeds of operation or new protocols. For example, IEEE
Std 802.3u™ added 100 Mb/s operation (also called Fast Ethernet), IEEE Std 802.3z added 1000 Mb/s oper-
ation (also called Gigabit Ethernet), IEEE Std 802.3ae added 10 Gb/s operation (also called 10 Gigabit
Ethernet), IEEE Std 802.3ah™ specified access network Ethernet (also called Ethernet in the First Mile) and
IEEE Std 802.3ba added 40 Gb/s operation (also called 40 Gigabit Ethernet) and 100 Gb/s operation (also
called 100 Gigabit Ethernet). These major additions are all now included in and are superseded by
IEEE Std 802.3-2015 and are not maintained as separate documents.
At the date of IEEEStd802.3bv-2017 publication, IEEEStd802.3 is composed of the following
documents:
IEEE Std 802.3-2015
Section One—Includes Clause 1 through Clause 20 and Annex A through Annex H and Annex 4A.
Section One includes the specifications for 10 Mb/s operation and the MAC, frame formats and service
interfaces used for all speeds of operation.
Section Two—Includes Clause 21 through Clause 33 and Annex 22A through Annex 33E. Section
Two includes management attributes for multiple protocols and speed of operation as well as specifica-
tions for providing power over twisted pair cabling for multiple operational speeds. It also includes
general information on 100 Mb/s operation as well as most of the 100 Mb/s Physical Layer specifica-
tions.
Section Three—Includes Clause 34 through Clause 43 and Annex 36A through Annex 43C. Section
Three includes general information on 1000 Mb/s operation as well as most of the 1000 Mb/s Physical
Layer specifications.
Section Four—Includes Clause 44 through Clause 55 and Annex 44A through Annex 55B. Section
Four includes general information on 10 Gb/s operation as well as most of the 10 Gb/s Physical Layer
specifications.
Section Five—Includes Clause 56 through Clause 77 and Annex 57A through Annex 76A. Clause 56
through Clause 67 and Clause 75 through Clause 77, as well as associated annexes, specify subscriber
10
Copyright © 2017 IEEE. All rights reserved.
© IEEE 2017 – All rights reserved

---------------------- Page: 13 ----------------------
ISO/IEC/IEEE 8802-3:2017/Amd.9:2018(E)
access and other Physical Layers and sublayers for operation from 512 kb/s to 10 Gb/s, and defines ser-
vices and protocol elements that enable the exchange of IEEE Std 802.3 format frames between sta-
tions in a subscriber access network. Clause 68 specifies a 10 Gb/s Physical Layer specification.
Clause 69 through Clause 74 and associated annexes specify Ethernet operation over electrical back-
planes at speeds of 1000 Mb/s and 10 Gb/s.
Section Six—Includes Clause 78 through Clause 95 and Annex 83A through Annex 93C. Clause 78
specifies Energy-Efficient Ethernet. Clause 79 specifies IEEE 802.3 Organizationally Specific Link
Layer Discovery Protocol (LLDP) type, length, and value (TLV) information elements. Clause 80
through Clause 95 and associated annexes includes general information on 40 Gb/s and 100 Gb/s oper-
ation as well the 40 Gb/s and 100 Gb/s Physical Layer specifications. Clause 90 specifies Ethernet sup-
port for time synchronization protocols.
IEEE Std 802.3bw™-2015
Amendment 1—This amendment includes changes to IEEE Std 802.3-2015 and adds Clause 96. This
amendment adds 100 Mb/s Physical Layer (PHY) specifications and management parameters for oper-
ation on a single balanced twisted-pair copper cable.
IEEE Std 802.3by™-2016
Amendment 2—This amendment includes changes to IEEE Std 802.3-2015 and adds Clause 105
through Clause 112, Annex 109A, Annex 109B, Annex 110A, Annex 110B, and Annex 110C. This
amendment adds MAC parameters, Physical Layers, and management parameters for the transfer of
IEEE 802.3 format frames at 25 Gb/s.
IEEE Std 802.3bq™-2016
Amendment 3—This amendment includes changes to IEEE Std 802.3-2015 and adds Clause 113 and
Annex 113A. This amendment adds new Physical Layers for 25 Gb/s and 40 Gb/s operation over bal-
anced twisted-pair structured cabling systems.
IEEE Std 802.3bp™-2016
Amendment 4—This amendment includes changes to IEEE Std 802.3-2015 and adds Clause 97 and
Clause 98. This amendment adds point-to-point 1 Gb/s Physical Layer (PHY) specifications and man-
age
...