ISO/IEC 29167-22:2018

Information technology — Automatic identification and data capture techniques — Part 22: Crypto suite SPECK security services for air interface communications

This document defines the crypto suite for SPECK for the ISO/IEC 18000 air interfaces standards for radio frequency identification (RFID) devices. Its purpose is to provide a common crypto suite for security for RFID devices that can be referred to by ISO committees for air interface standards and application standards. The crypto suite is defined in alignment with existing air interfaces. SPECK is a symmetric block cipher that is parameterized in both its block length and key length. In this document, a variety of block/key length options are supported. This document defines various methods of use for the cipher. A Tag and an Interrogator can support one, a subset, or all of the specified options, clearly stating what is supported.

Technologies de l'information — Techniques automatiques d'identification et de capture de données — Partie 22: Services de sécurité par suite cryptographique SPECK pour communications par interface radio

General Information

• Status: Published
• Publication Date: 05-Nov-2018
• ICS: 35.040.50 - Automatic identification and data capture techniques
• Technical Committee: ISO/IEC JTC 1/SC 31 - Automatic identification and data capture techniques
• Drafting Committee: ISO/IEC JTC 1/SC 31/WG 4 - Radio communications
• Current Stage: 9092 - International Standard to be revised
• Completion Date: 14-May-2024

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 29167-22
First edition
2018-11
Information technology — Automatic
identification and data capture
techniques —
Part 22:
Crypto suite SPECK security services
for air interface communications
Technologies de l'information — Techniques automatiques
d'identification et de capture de données —
Partie 22: Services de sécurité par suite cryptographique SPECK
pour communications par interface radio
Reference number
ISO/IEC 29167-22:2018(E)
©
ISO/IEC 2018

---------------------- Page: 1 ----------------------
ISO/IEC 29167-22:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 29167-22:2018(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms, definitions, symbols and abbreviated terms . 1
3.1 Terms and definitions . 1
3.2 Symbols . 2
3.3 Abbreviated terms . 3
4 Conformance . 3
4.1 Air interface protocol specific information . 3
4.2 Interrogator conformance and obligations . 3
4.3 Tag conformance and obligations . 4
5 Introducing the SPECK cryptographic suite . 4
6 Parameter and variable definitions . 4
7 Crypto suite state diagram . 5
8 Initialization and resetting . 6
9 Authentication . 6
9.1 General .
...