ISO 374-1

Protective gloves against dangerous chemicals and micro-organisms — Part 1: Terminology and performance requirements for chemical risks

ISO 374-1:2016 specifies the requirements for protective gloves intended to protect the user against dangerous chemicals and defines terms to be used. NOTE If other protection features have to be covered, e.g. mechanical risks, thermal risks, electrostatic dissipation etc., the appropriate specific performance standard is to be used in addition. Further information on protective gloves standards can be found in the EN 420.

Gants de protection contre les produits chimiques dangereux et les micro-organismes — Partie 1: Terminologie et exigences de performance pour les risques chimiques

L'ISO 374-1 :2016 spécifie les exigences relatives aux gants de protection servant à protéger l'utilisateur contre les produits chimiques dangereux et définit les termes à utiliser. NOTE Si d'autres fonctions de protection doivent être couvertes, par exemple les risques mécaniques, les risques thermiques, la dissipation électrostatique, etc., il convient que la norme de performance spécifique appropriée soit utilisée en complément. Des informations supplémentaires sur les normes concernant les gants de protection peuvent se trouver dans l'EN 420.

General Information

• Status: Not Published
• ICS: 01.040.13 - Environment. Health protection. Safety (Vocabularies)
• ICS: 13.340.40 - Hand and arm protection
• Technical Committee: ISO/TC 94/SC 13 - Protective clothing
• Drafting Committee: ISO/TC 94/SC 13 - Protective clothing
• Current Stage: 6000 - International Standard under publication
• Completion Date: 14-Jun-2024

Relations

• Consolidates: ISO/TS 22933:2022 - Surface chemical analysis — Secondary ion mass spectrometry — Method for the measurement of mass resolution in SIMS
• Effective Date: 06-Jun-2022
• Revises: ISO 374-1:2016/Amd 1:2018 - Protective gloves against dangerous chemicals and micro-organisms — Part 1: Terminology and performance requirements for chemical risks — Amendment 1
• Effective Date: 06-Jun-2022
• Revises: ISO 374-1:2016 - Protective gloves against dangerous chemicals and micro-organisms — Part 1: Terminology and performance requirements for chemical risks
• Effective Date: 06-Jun-2022

Standards Content (Sample)

FINAL DRAFT
International
Standard
ISO/FDIS 374-1
ISO/TC 94/SC 13
Protective gloves against dangerous
Secretariat: SNV
chemicals and micro-organisms —
Voting begins on:
2024-03-21
Part 1:
Terminology and performance
Voting terminates on:
2024-06-13
requirements for chemical risks
Gants de protection contre les produits chimiques dangereux et
les micro-organismes —
Partie 1: Terminologie et exigences de performance pour les
risques chimiques
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/CEN PARALLEL PROCESSING LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/FDIS 374-1:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
FINAL DRAFT
ISO/FDIS 374-1:2024(en)
International
Standard
ISO/FDIS 374-1
ISO/TC 94/SC 13
Protective gloves against dangerous
Secretariat: SNV
chemicals and micro-organisms —
Voting begins on:
Part 1:
2024-03-21
Terminology and performance
Voting terminates on:
requirements for chemical risks
2024-06-13
Gants de protection contre les produits chimiques dangereux et
les micro-organismes —
Partie 1: Terminologie et exigences de performance pour les
risques chimiques
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
COPYRIGHT PROTECTED DOCUMENT
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/CEN PARALLEL PROCESSING
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO/FDIS 374-1:2024(en) © ISO 2024

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/FDIS 374-1:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Sampling . 2
4.1 Sampling for permeation .2
4.2 Sampling for penetration testing .3
4.3 Sampling for degradation testing .3
5 Performance requirement. 3
5.1 General requirements .
...

Style Definition
...
Style Definition
...
Style Definition
...
ISO/TC 94/SC 13
Style Definition
...
Style Definition
Date: 2023-05-05
...
Style Definition
...
ISO/FDIS 374-1:2023(E)
Style Definition
...
Style Definition
...
ISO/TC 94/SC 13
Style Definition
...
Style Definition
...
Secretariat: SNV
Style Definition
...
Date: 2024-xx
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Protective gloves against dangerous chemicals and micro-
Style Definition
...
organisms —
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Part 1: Style Definition
...
Style Definition
...
Terminology and performance requirements for chemical risks
Style Definition
...
Gants de protection contre les produits chimiques dangereux et les micro-organismes — Partie 1 —
Style Definition
...
Terminologie et exigences de performance pour les risques chimiques
Style Definition
...
Style Definition
...
Partie 1: Terminologie et exigences de performance pour les risques chimiques
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
FDIS stage
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...

---------------------- Page: 1 ----------------------
Formatted: Font: 11 pt
ISO/FDIS 374-1:2023(E2024(en)
Formatted: Font: 11 pt
Formatted: HeaderCentered
Formatted: Left: 1.5 cm, Right: 1.5 cm, Gutter: 0 cm,
© ISO 20232024
Header distance from edge: 1.27 cm
Commented [eXtyles1]: The reference is to a withdrawn
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
standard which has been replaced
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,

or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
ISO 20344, Personal protective equipment — Test methods for
at the address below or ISO’s member body in the country of the requester. footwear
Formatted: Default Paragraph Font
ISO copyright office
Formatted: Adjust space between Latin and Asian text,
CP 401 • Ch. de Blandonnet 8 • CP 401
Adjust space between Asian text and numbers, Tab stops: Not
CH-1214 Vernier, Geneva, Switzerland
at 3 cm
Tel.Phone: + 41 22 749 01 11
Formatted: Adjust space between Latin and Asian text,
Adjust space between Asian text and numbers
Fax + 41 22 749 09 47
Formatted: French (France)
copyright@iso.E-mail: [e-mail] Formatted: French (France)
Formatted: zzCopyright address, Adjust space between Latin
www.iso.org
and Asian text, Adjust space between Asian text and numbers
Website: www.iso.org
Published in Switzerland
Formatted: FooterPageRomanNumber
ii © ISO 2023 – All rights reserved
© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
Formatted: Font: 11 pt
ISO/FDIS 374-1:2023(E2024(en)
Formatted: Font: 11 pt
Formatted: HeaderCentered, Left
Formatted: Adjust space between Latin and Asian text,
Contents
Adjust space between Asian text and numbers, Tab stops: Not
at 0.71 cm
Foreword . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Sampling . 2
4.1 Sampling for permeation . 2
4.2 Sampling for penetration testing .
...