ISO 6347:2004

Textile floor coverings — Consumer information

ISO 6347:2004 specifies the technical subjects that form the basis for the provision of information, at the point of sale, for the guidance of the consumer prior to and after the purchase of a textile floor covering. It is applicable to textile floor coverings of all types.

Revêtements de sol textiles — Information du consommateur

General Information

• Status: Withdrawn
• Publication Date: 02-Sep-2004
• Withdrawal Date: 02-Sep-2004
• ICS: 59.080.60 - Textile floor coverings
• ICS: 97.020 - Home economics in general
• ICS: 97.150 - Floor coverings
• Technical Committee: ISO/TC 219 - Floor coverings
• Drafting Committee: ISO/TC 219 - Floor coverings
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 23-Feb-2017

Relations

• Revised: ISO 6347:2017 - Textile floor coverings — Consumer information
• Effective Date: 07-Jun-2014
• Revises: ISO 6347:1989 - Textile floor coverings — Consumer information
• Effective Date: 15-Apr-2008

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 6347
Second edition
2004-09-01
Textile floor coverings — Consumer
information
Revêtements de sol textiles — Information du consommateur

Reference number
ISO 6347:2004(E)
©
ISO 2004

---------------------- Page: 1 ----------------------
ISO 6347:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
©
ii ISO 2004 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 6347:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 6347 was prepared by Technical Committee ISO/TC 219, Floor coverings.
This second edition cancels and replaces the first edition (ISO 6347:1989), which has been technically revised.
©
ISO 2004 – All rights reserved iii

---------------------- Page: 3 ----------------------
.
iv

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 6347:2004(E)
Textile floor coverings — Consumer information
1Scope
This International Standard specifies the technical subjects that form the basis for the provision of information,
at the point of sale, for the guidance of the consumer prior to and after the purchase of a textile floor covering. It
is applicable to textile floor coverings of all types.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO 1765, Machine-made textile floor coverings — Determination of thickness
ISO 1833, Textiles — Binary fibre mixtures — Quantitative chemical analysis
ISO 2076, Textiles — Man-made fibres — Generic names
ISO 3018, Textile floor coverings — Rectangular textile floor coverings — Determination of dimensions
ISO 5088, Textiles — Ternary fibre mixtures — Quantitative analysis
ISO 6938, Textiles — Natural fibres — Generic names and definitions
ISO 8543, Textile floor coverings — Methods for determination of mass
3 Information to be provided
3.1 Essential information
3.1.1 General
Essential
...