ISO 11855-7:2019/Amd 1:2024

Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 7: Input parameters for the energy calculation — Amendment 1

Conception de l'environnement des bâtiments — Conception, dimensionnement, installation et contrôle des systèmes radiants encastrés de chauffage et de refroidissement — Partie 7: Paramètres d'entrée pour le calcul de la performance énergétique — Amendement 1

General Information

• Status: Published
• Publication Date: 16-Jan-2024
• ICS: 91.040.01 - Buildings in general
• Technical Committee: ISO/TC 205 - Building environment design
• Drafting Committee: ISO/TC 205 - Building environment design
• Current Stage: 6060 - International Standard published
• Start Date: 17-Jan-2024
• Due Date: 22-Sep-2024
• Completion Date: 17-Jan-2024

Relations

• Amends: ISO 11855-7:2019 - Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 7: Input parameters for the energy calculation
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 11855-7
First edition
2019-09
AMENDMENT 1
Building environment design —
Design, dimensioning, installation and
control of embedded radiant heating
and cooling systems —
Part 7:
Input parameters for the energy
calculation
AMENDMENT 1
Conception de l'environnement des bâtiments — Conception,
dimensionnement, installation et contrôle des systèmes radiants
encastrés de chauffage et de refroidissement —
Partie 7: Paramètres d'entrée pour le calcul de la performance
énergétique
AMENDEMENT 1
PROOF/ÉPREUVE
Reference number
ISO 11855-7:2019/Amd.1:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 11855-7:2019/Amd.1:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 11855-7:2019/Amd.1:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use
of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO had not received
notice of (a) patent(s) which may be required to implement this document. However, implementers are
cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents. ISO shall not be held responsible for identifying any or all
such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the
...

DRAFT AMENDMENT
ISO 11855-7:2019/DAMPRF Amd 1:2023(E)
ISO/TC 205
Secretariat: ANSI
Date: 2023-04-1910-25
Building environment design — Design, dimensioning, installation
and control of embedded radiant heating and cooling systems
— —
Part 7:
Input parameters for the energy calculation — Amendment
AMENDMENT 1
Conception de l'environnement des bâtiments — Conception, dimensionnement, installation et contrôle des
systèmes radiants encastrés de chauffage et de refroidissement — Partie 7: Paramètres d'entrée pour le
calcul de la performance énergétique — Amendement 1 —
DRAFT AMENDMENT Partie 7: Paramètres d'entrée pour le calcul de la performance énergétique
AMENDEMENT 1
FDIS stage

---------------------- Page: 1 ----------------------
ISO 11855-7:2019/DAMPRF Amd 1:2023(E)
© ISO 20232019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Fax: [phone]
EmailE-mail: [e-mail]
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO 2023 – All rights reserved
ii © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 11855-7:2019/PRF Amd 1(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of
(a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice
of (a) patent(s) which may be required to implement this document. However, implementers are
cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents.www.iso.org/patents. ISO shall not be held responsible for
identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO
...