Rolling bearings — Measuring methods for vibration — Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface

This document specifies vibration measuring methods for double-row radial spherical roller bearings
and single-row and double-row radial tapered roller bearings, with cylindrical bore and outside surface
and a contact angle up to and including 45°, under established measuring conditions.

Roulements — Méthodes de mesurage des vibrations — Partie 3: Roulements à rotule sur rouleaux et à rouleaux coniques, à alésage et surface extérieure cylindriques

ISO 15242-3:2017 spécifie des méthodes de mesurage des vibrations des roulements à rotule sur rouleaux à deux rangées et les roulements à rouleaux coniques à une rangée et à deux rangées, avec un alésage et une surface extérieure cylindriques et un angle de contact inférieur ou égal à 45°, dans des conditions de mesurage établies.

Kotalni ležaji - Metode za merjenje vibracij - 3. del: Dvoredni radialni kroglični in radialni stožčasti kotalni ležaji z valjasto luknjo in valjasto zunanjo ploskvijo

General Information

Status
Published
Publication Date
07-Aug-2017
Technical Committee
Drafting Committee
Current Stage
9093 - International Standard confirmed
Completion Date
06-Dec-2022

Relations

Buy Standard

Standard
ISO 15242-3:2020
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 15242-3:2017 - Rolling bearings -- Measuring methods for vibration
English language
7 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 15242-3:2017 - Roulements -- Méthodes de mesurage des vibrations
French language
8 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ISO 15242-3:2020
01-oktober-2020
Kotalni ležaji - Metode za merjenje vibracij - 3. del: Dvoredni radialni kroglični in
radialni stožčasti kotalni ležaji z valjasto luknjo in valjasto zunanjo ploskvijo
Rolling bearings - Measuring methods for vibration - Part 3: Radial spherical and tapered
roller bearings with cylindrical bore and outside surface
Roulements - Méthodes de mesurage des vibrations
Ta slovenski standard je istoveten z: ISO 15242-3:2017
ICS:
17.160 Vibracije, meritve udarcev in Vibrations, shock and
vibracij vibration measurements
21.100.20 Kotalni ležaji Rolling bearings
SIST ISO 15242-3:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST ISO 15242-3:2020

---------------------- Page: 2 ----------------------
SIST ISO 15242-3:2020
INTERNATIONAL ISO
STANDARD 15242-3
Second edition
2017-08
Rolling bearings — Measuring
methods for vibration —
Part 3:
Radial spherical and tapered roller
bearings with cylindrical bore and
outside surface
Roulements — Méthodes de mesurage des vibrations —
Partie 3: Roulements à rotule sur rouleaux et à rouleaux coniques, à
alésage et surface extérieure cylindriques
Reference number
ISO 15242-3:2017(E)
©
ISO 2017

---------------------- Page: 3 ----------------------
SIST ISO 15242-3:2020
ISO 15242-3:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
SIST ISO 15242-3:2020
ISO 15242-3:2017(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Measurement process . 1
4.1 Rotational frequency. 1
4.2 Bearing axial load . 2
5 Measurement and evaluation methods . 2
5.1 Physical quantity measured. 2
5.2 Frequency domain . 2
5.3 Measurement of pulses and spikes . 3
5.4 Measurement . 3
6 Conditions for measurement . 3
6.1 Bearing conditions for measurement . 3
6.1.1 Prelubricated bearings . 3
6.1.2 Non-prelubricated bearings . 3
6.2 Conditions of the measurement environment . 4
6.3 Conditions for the measuring device . 4
6.3.1 Stiffness of the spindle/mandrel arrangement . 4
6.3.2 Loading mechanism . 4
6.3.3 Magnitude and alignment of the external load applied to the bearing . 4
6.3.4 Axial location of the transducer and direction of measurement . 5
6.3.5 Mandrel . 6
Annex A (normative) Measurement of external axial loading alignment . 7
© ISO 2017 – All rights reserved iii

---------------------- Page: 5 ----------------------
SIST ISO 15242-3:2020
ISO 15242-3:2017(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO’s adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: w w w . i s o .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 4, Rolling bearings.
This second edition cancels and replaces the first edition (ISO 15242-3:2006), which has been
technically revised. It also incorporates the Technical Corrigendum ISO 15242-3:2006/Cor. 1:2010.
The main changes compared to the previous edition are as follows:
— editorial changes have been made for clarification and removal of inconsistencies;
— figure keys have been updated for clarification.
A list of all parts in the ISO 15242 series can be found on the ISO website.
iv © ISO 2017 – All rights reserved

---------------------- Page: 6 ----------------------
SIST ISO 15242-3:2020
ISO 15242-3:2017(E)

Introduction
Vibration in rotating rolling bearings can be of importance as an operating characteristic of such
bearings. The vibration can affect the performance of the mechanical system incorporating the bearing
and can result in audible noise when the vibration is transmitted to the environment in which the
mechanical system operates, can lead to damages, and can even create health problems.
Vibration of rotating rolling bearings is a complex physical phenomenon dependent on the conditions
of operation. Measuring the vibration of an individual bearing under a certain set of conditions does
not necessarily characterize the vibration under a different set of conditions or when the bearing
becomes part of a larger assembly. Assessment of the audible sound generated by the mechanical
system incorporating the bearing is further complicated by the influence of the interface conditions,
the location and orientation of the sensing device, and the acoustical environment in which the system
operates. Assessment of airborne noise that, for the purpose of ISO 15242 (all parts), can be defined
as any disagreeable and undesired sound is further complicated by the subjective nature of the terms
disagreeable and undesired. Structure-borne vibration can be considered the driving mechanism that
ultimately results in the generation of airborne noise. Only selected methods for the measurement of
the structure-borne vibration of rotating rolling bearings are addressed in the current edition of all
parts of ISO 15242.
Vibration of rotating rolling bearings can be assessed by a number of means using various types of
transducers and measurement conditions. No simple set of values characterizing the vibration of
a bearing is adequate for the evaluation of the vibratory performance in all possible applications.
Ultimately, a knowledge of the type of bearing, its application and the purpose of the vibration
measurement (e.g. as a manufacturing process diagnostic or an assessment of the product quality) is
required to select the most suitable method for measuring. The field of application for standards on
bearing vibration is, therefore, not universal. However, certain methods have established a wide enough
level of application to be considered as standard methods.
This document serves to define the detailed method for assessing vibration of radial spherical and
tapered roller bearings with cylindrical bore and outside surface on a measuring device.
© ISO 2017 – All rights reserved v

---------------------- Page: 7 ----------------------
SIST ISO 15242-3:2020

----------
...

INTERNATIONAL ISO
STANDARD 15242-3
Second edition
2017-08
Rolling bearings — Measuring
methods for vibration —
Part 3:
Radial spherical and tapered roller
bearings with cylindrical bore and
outside surface
Roulements — Méthodes de mesurage des vibrations —
Partie 3: Roulements à rotule sur rouleaux et à rouleaux coniques, à
alésage et surface extérieure cylindriques
Reference number
ISO 15242-3:2017(E)
©
ISO 2017

---------------------- Page: 1 ----------------------
ISO 15242-3:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 15242-3:2017(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Measurement process . 1
4.1 Rotational frequency. 1
4.2 Bearing axial load . 2
5 Measurement and evaluation methods . 2
5.1 Physical quantity measured. 2
5.2 Frequency domain . 2
5.3 Measurement of pulses and spikes . 3
5.4 Measurement . 3
6 Conditions for measurement . 3
6.1 Bearing conditions for measurement . 3
6.1.1 Prelubricated bearings . 3
6.1.2 Non-prelubricated bearings . 3
6.2 Conditions of the measurement environment . 4
6.3 Conditions for the measuring device . 4
6.3.1 Stiffness of the spindle/mandrel arrangement . 4
6.3.2 Loading mechanism . 4
6.3.3 Magnitude and alignment of the external load applied to the bearing . 4
6.3.4 Axial location of the transducer and direction of measurement . 5
6.3.5 Mandrel . 6
Annex A (normative) Measurement of external axial loading alignment . 7
© ISO 2017 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 15242-3:2017(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO’s adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: w w w . i s o .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 4, Rolling bearings.
This second edition cancels and replaces the first edition (ISO 15242-3:2006), which has been
technically revised. It also incorporates the Technical Corrigendum ISO 15242-3:2006/Cor. 1:2010.
The main changes compared to the previous edition are as follows:
— editorial changes have been made for clarification and removal of inconsistencies;
— figure keys have been updated for clarification.
A list of all parts in the ISO 15242 series can be found on the ISO website.
iv © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 15242-3:2017(E)

Introduction
Vibration in rotating rolling bearings can be of importance as an operating characteristic of such
bearings. The vibration can affect the performance of the mechanical system incorporating the bearing
and can result in audible noise when the vibration is transmitted to the environment in which the
mechanical system operates, can lead to damages, and can even create health problems.
Vibration of rotating rolling bearings is a complex physical phenomenon dependent on the conditions
of operation. Measuring the vibration of an individual bearing under a certain set of conditions does
not necessarily characterize the vibration under a different set of conditions or when the bearing
becomes part of a larger assembly. Assessment of the audible sound generated by the mechanical
system incorporating the bearing is further complicated by the influence of the interface conditions,
the location and orientation of the sensing device, and the acoustical environment in which the system
operates. Assessment of airborne noise that, for the purpose of ISO 15242 (all parts), can be defined
as any disagreeable and undesired sound is further complicated by the subjective nature of the terms
disagreeable and undesired. Structure-borne vibration can be considered the driving mechanism that
ultimately results in the generation of airborne noise. Only selected methods for the measurement of
the structure-borne vibration of rotating rolling bearings are addressed in the current edition of all
parts of ISO 15242.
Vibration of rotating rolling bearings can be assessed by a number of means using various types of
transducers and measurement conditions. No simple set of values characterizing the vibration of
a bearing is adequate for the evaluation of the vibratory performance in all possible applications.
Ultimately, a knowledge of the type of bearing, its application and the purpose of the vibration
measurement (e.g. as a manufacturing process diagnostic or an assessment of the product quality) is
required to select the most suitable method for measuring. The field of application for standards on
bearing vibration is, therefore, not universal. However, certain methods have established a wide enough
level of application to be considered as standard methods.
This document serves to define the detailed method for assessing vibration of radial spherical and
tapered roller bearings with cylindrical bore and outside surface on a measuring device.
© ISO 2017 – All rights reserved v

---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 15242-3:2017(E)
Rolling bearings — Measuring methods for vibration —
Part 3:
Radial spherical and tapered roller bearings with
cylindrical bore and outside surface
1 Scope
This document specifies vibration measuring methods for double-row radial spherical roller bearings
and single-row and double-row radial tapered roller bearings, with cylindrical bore and outside surface
and a contact angle up to and including 45°, under established measuring conditions.
2 N
...

NORME ISO
INTERNATIONALE 15242-3
Deuxième édition
2017-08
Roulements — Méthodes de mesurage
des vibrations —
Partie 3:
Roulements à rotule sur rouleaux
et à rouleaux coniques, à alésage et
surface extérieure cylindriques
Rolling bearings — Measuring methods for vibration —
Part 3: Radial spherical and tapered roller bearings with cylindrical
bore and outside surface
Numéro de référence
ISO 15242-3:2017(F)
©
ISO 2017

---------------------- Page: 1 ----------------------
ISO 15242-3:2017(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2017, Publié en Suisse
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 15242-3:2017(F)

Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Processus de mesurage. 1
4.1 Fréquence de rotation. 1
4.2 Charge axiale du roulement . 2
5 Méthodes de mesurage et d’évaluation . 2
5.1 Grandeur physique mesurée . 2
5.2 Gamme de fréquences. 2
5.3 Mesurage des impulsions et des pics . 3
5.4 Mesurage . 3
6 Conditions de mesurage . 3
6.1 État des roulements avant mesurage . 3
6.1.1 Roulements prélubrifiés . 3
6.1.2 Roulements non prélubrifiés . 4
6.2 Conditions environnementales de mesurage . 4
6.3 Conditions relatives au dispositif de mesurage . 4
6.3.1 Raideur de la broche/mandrin . 4
6.3.2 Mécanisme de mise en charge . 4
6.3.3 Valeur et alignement de la charge externe appliquée au roulement . 4
6.3.4 Positionnement axial du transducteur et sens du mesurage . 5
6.3.5 Mandrin . 7
Annexe A (normative) Mesurage de l’alignement axial extérieur de mise en charge .8
© ISO 2017 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 15242-3:2017(F)

Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www
.iso .org/ directives).
L’attention est attirée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l’élaboration du document sont indiqués dans l’Introduction et/ou dans la liste des déclarations de
brevets reçues par l’ISO (voir www .iso .org/ brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l’ISO liés à l’évaluation de la conformité, ou pour toute information au sujet de l’adhésion
de l’ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles
techniques au commerce (OTC), voir le lien suivant: w w w . i s o .org/ avant -propos.
Le présent document a été élaboré par le comité technique ISO/TC 4, Roulements.
Cette deuxième édition annule et remplace la première édition (ISO 15242-3:2006), qui a fait l’objet
d’une révision technique. Il intègre également le Correctif Technique ISO 15242-3:2006/Cor 1:2010.
Les principales modifications par rapport à la précédente édition sont les suivantes:
— des modifications rédactionnelles ont été apportées pour clarifier et enlever les incohérences;
— les légendes de figures ont été mise à jour pour clarification.
Une liste de toutes les parties de la série ISO 15242 se trouve sur le site web de l’ISO.
iv © ISO 2017 – Tous droits réservés

---------------------- Page: 4 ----------------------
ISO 15242-3:2017(F)

Introduction
La vibration des roulements rotatifs peut avoir des conséquences importantes sur les caractéristiques
de fonctionnement de ces matériels. Elle peut également affecter les performances du système
mécanique incorporant ces roulements, engendrer un bruit audible par transmission de cette vibration
à l’environnement de travail, provoquer des dommages, voire des problèmes de santé.
La vibration des roulements rotatifs est un phénomène physique complexe qui dépend des conditions
de fonctionnement. Le fait de mesurer la vibration d’un roulement donné dans des conditions données
ne caractérise pas nécessairement la vibration de ce roulement dans d’autres conditions ou de ce
roulement dès qu’il fait partie d’un ensemble plus grand. L’évaluation du bruit audible engendré par
le système mécanique incorporant le roulement est encore compliquée par l’effet des conditions
d’interface, de l’emplacement et de l’orientation du capteur et de l’environnement acoustique dans
lequel le système fonctionne. L’évaluation du bruit aérien qui, dans le cadre de l’ISO 15242 (toutes les
parties), peut se définir comme tout bruit désagréable et non souhaité, est également compliquée par
l’acception subjective que l’on donne aux termes désagréable et non souhaité. C’est principalement
la vibration transmise par la structure qui peut être considérée comme à la base du bruit aérien. La
présente édition de toutes les parties de l’ISO 15242 ne s’intéresse qu’à un certain nombre de méthodes
choisies pour mesurer la vibration de la structure des roulements rotatifs.
Les vibrations des roulements rotatifs peuvent être évaluées de plusieurs manières en utilisant divers
types de transducteurs dans diverses conditions de mesurage. Aucun ensemble simple de valeurs
caractérisant la vibration d’un roulement n’est suffisant pour évaluer la performance de toutes les
applications possibles. Pour choisir la méthode de mesurage la plus appropriée, il est essentiel, en fin de
compte, de connaître le type du roulement, son utilisation et le but visé par les mesures de vibrations
(par exemple, diagnostic technique ou contrôle qualité). Le domaine d’application des normes relatives
aux vibrations des roulements n’est donc pas universel. Certaines méthodes ont toutefois un champ
d’application suffisamment vaste pour être considérées comme des méthodes normalisées.
Le présent document sert à définir une méthode détaillée d’évaluation des vibrations des roulements à
rotules sur rouleaux et à rouleaux coniques à alésage et surface extérieure cylindriques sur un dispositif
de mesurage.
© ISO 2017 – Tous droits réservés v

---------------------- Page: 5 ----------------------
NORME INTERNATIONALE ISO 15242-3:2017(F)
Roulements — Méthodes de mesurage des vibrations —
Partie 3:
Roulements à rotule sur rouleaux et à rouleaux coniques, à
alésage et surface extérieure cylindriques
1 Domaine d’application
Le présent document spécifie des méthodes de mesurage des vibrations des roulements à rotule sur
rouleaux à deux rangées et les roulements à rouleaux coniques à une rangée et à deux rangées, avec un
alésage et une surface extérieure cylindriques et un angle de contact inférieur ou égal à 45°, dans des
conditions de mesurage établies.
2 Références normatives
Les documents suivants cités dans le texte constituent, pour tout ou partie de leur contenu, des
exigences du présent document. Pour les références datées, seule l’édition citée s’applique. Pour les
références non datées, la dernière édition du document de référence s’applique (y compris les éventuels
amendements).
ISO 286-2, Spécification géométrique des produits (GPS) — Système de codification ISO pour les tolérances
sur les tailles linéaires — Partie 2: Tableaux des classes de tolérance normalisées et des é
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.