ISO/IEC/IEEE 8802-A:2015/Amd 1:2018

Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Part A: Overview and architecture — Amendment 1: Allocation of Uniform Resource Name (URN) values in IEEE 802® standards

Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Partie A: Présentation et architecture — Amendement 1: Attribution de valeurs de noms de ressources uniformes (URN) dans les normes IEEE 802®

General Information

• Status: Published
• Publication Date: 26-Apr-2018
• ICS: 35.110 - Networking
• Technical Committee: ISO/IEC JTC 1/SC 6 - Telecommunications and information exchange between systems
• Drafting Committee: ISO/IEC JTC 1/SC 6 - Telecommunications and information exchange between systems
• Current Stage: 6060 - International Standard published
• Due Date: 17-Aug-2020
• Completion Date: 27-Apr-2018

Relations

• Amends: ISO/IEC/IEEE 8802-A:2015 - Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Part A: Overview and architecture
• Effective Date: 12-Oct-2020

Standards Content (Sample)

INTERNATIONAL ISO/IEC/
STANDARD IEEE
8802-A
First edition
2015-12-15
AMENDMENT 1
2018-04
Information technology —
Telecommunications and information
exchange between systems — Local
and metropolitan area networks —
Part A:
Overview and architecture
AMENDMENT 1: Allocation of Uniform
Resource Name (URN) values in IEEE
802® standards
Technologies de l'information — Télécommunications et échange
d'information entre systèmes — Réseaux locaux et métropolitains —
Partie A: Présentation et architecture
AMENDEMENT 1: Attribution de valeurs de noms de ressources
uniformes (URN) dans les normes IEEE 802®
Reference number
ISO/IEC/IEEE 8802-A:2015/Amd.1:2018(E)
©
 IEEE 2017

---------------------- Page: 1 ----------------------
ISO/IEC/IEEE 8802-A:2015/Amd.1:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© IEEE 2017
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO or IEEE at
the respective address below or ISO’s member body in the country of the requester.
ISO copyright office Institute of Electrical and Electronics Engineers, Inc
CP 401 • Ch. de Blandonnet 8 3 Park Avenue, New York
CH-1214 Vernier, Geneva NY 10016-5997, USA
Phone: [phone]
Fax: [phone]
Email: [e-mail] Email: [e-mail]
Website: www.iso.org Website: www.ieee.org
Published in Switzerland
© IEEE 2017 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/IEC/IEEE 8802-A:2015/Amd.1:2018(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO
or IEC participate in the development of International Standards through technical committees established by the
respective organization to deal with particular fields of technical activity. ISO and IEC technical committees
collaborate in fields of mutual interest. Other international organizations, governmental and non‐governmental,
in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have
established a joint technical committee, ISO/IEC JTC 1.
The procedures used to develop this document and those intended for its further maintenance are described in the
ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO
documents should be noted.
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of
the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus
development process, approved by the American National Standards Institute, which brings together volunteers
representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members
of the Institute and serve without compensation. While the IEEE administers the process and establishes rules to
promote fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify
the accuracy of any of the information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.
ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights
identified during the development of the document will be in the Introduction and/or on the ISO list of patent
declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not constitute an
endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related
to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO)
principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.
ISO/IEC/IEEE 8802‐A:2015/Amd.1 was prepared by the LAN/MAN of the IEEE Computer Society (as
IEEE Std 802d‐2017) and drafted in accordance with its editorial rules. It was adopted under the “fast-track
procedure” defined in the Partner Standards Development Organization cooperation agreement between ISO and
IEEE, by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 6, Telecommunications
and information exchange between systems.
A list of all parts in the ISO/IEC/IEEE 8802 series can be found on the ISO website.
© IEEE 2017 – All rights reserved iii

---------------------- Page: 3 ----------------------
IEEE Std 802d™-2017
(Amendment to
®
IEEE Std 802 -2014)
IEEE Standard for Local and
Metropolitan Area Networks:
Overview and Architecture
Amendment 1: Allocation of
Uniform Resource Name (URN)
®
Values in IEEE 802 Standards
Sponsor
LAN/MAN Standards Committee
of the
IEEE Computer Society
Approved 14 February 2017
IEEE-SA Standards Board

---------------------- Page: 4 ----------------------
ISO/IEC/IEEE 8802-A:2015/Amd.1:2018(E)
®
Abstract: How Uniform Resource Name (URN) values are allocated in IEEE 802 standards is
®
described in this amendment to IEEE Std 802 -2014.
®
Keywords: IEEE 802 , Uniform Resource Name, URN
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2017 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 31 March 2017. Printed in the United States of America.
IEEE and 802 are registered trademarks in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and
Electronics Engineers, Incorporated.
PDF: ISBN 978-1-5044-3907-7 STD22508
Print: ISBN 978-1-5044-3908-4 STDPD22508
IEEE Prohibits discrimination, harassment, and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior
written permission of the publisher.
2
&RS\ULJKW‹,((($OOULJKWVUHVHUYHG
© IEEE 2017 – All rights reserved

---------------------- Page: 5 ----------------------
ISO/IEC/IEEE 8802-A:2015/Amd.1:2018(E)
Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These notices and
disclaimers, or a reference to this page, appear in all standards and may be found under the heading “Important Notices
and Disclaimers Concerning IEEE Standards Documents.” They can also be obtained on request from IEEE or viewed at
http://standards.ieee.org/IPR/disclaimers.html.
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are developed
within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (“IEEE-SA”)
Standards Board. IEEE (“the Institute”) develops its standards through a consensus development process, approved by
the American National Standards Institute (“ANSI”), which brings together volunteers representing varied viewpoints
and interests to achieve the final product. IEEE Standards are documents developed through scientific, academic, and
industry-based technical working groups. Volunteers in IEEE working groups are not necessarily members of the
Institute and participate without compensation from IEEE. While IEEE administers the process and establishes rules to
promote fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the
accuracy of any of the information or the soundness of any judgments contained in its standards.
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure against
interference with or from other devices or networks. Implementers and users of IEEE Standards documents are
responsible for determining and complying with all appropriate safety, security, environmental, health, and interference
protection practices and all applicable laws and regulations.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and expressly
disclaims all warranties (express, implied and statutory) not included in this or any other document relating to the
standard, including, but not limited to, the warranties of: merchantability; fitness for a particular purpose; non-
infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims
any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and
“WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other
ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE
standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change
brought about through developments in the state of the art and comments received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for,
or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to
another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in
the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent
professional in determining the appropriateness of a given IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
Translations
The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE
standard is translated, only the English version published by IEEE should be considered the approved IEEE standard.
3
Copyright © 2017 IEEE. All rights reserved.
© IEEE 2017 – All rights reserved

---------------------- Page: 6 ----------------------
ISO/IEC/IEEE 8802-A:2015/Amd.1:2018(E)
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual
shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered
to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an
individual presenting information on IEEE standards shall make it clear that his or her views should be considered the
personal views of that individual rather than the formal position of IEEE.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership
affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards
documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with
appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that
any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE
and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to
comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE
does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is
welcome to join the relevant IEEE working group.
Comments on standards should be submitted to the following address:
Secretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions
of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of
the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the
publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents
may not be construed as doing so.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made
available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by
reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering
practices and methods. By making these documents available for use and adoption by public authorities and private
users, IEEE does not waive any rights in copyright to the documents.
Photocopies
Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions
of any individual standard for company or organizational internal use or individual, non-commercial use only. To
arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood
Drive, Danvers, MA 01923 USA; [phone]. Permission to photocopy portions of any individual standard for
educational classroom use can also be obtained through the Copyright Clearance Center.
4
Copyright © 2017 IEEE. All rights reserved.
© IEEE 2017 – All rights reserved

---------------------- Page: 7 ----------------------
ISO/IEC/IEEE 8802-A:2015/Amd.1:2018(E)
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the
issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or
errata. An official IEEE document at any point in time consists of the current edition of the document together with any
amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has
not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not
wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of
any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended through the
issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http://ieeexplore.ieee.org or contact IEEE
at the address listed previously. For more information about the IEEE SA or IEEE’s standards development process,
visit the IEEE-SA Website at http://standards.ieee.org.
Errata
Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http://
standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically.
Patents
Attention is called to the possibility that implementat
...