ISO/IEC 23008-9:2019

Information technology - High efficiency coding and media delivery in heterogeneous environments - Part 9: 3D Audio conformance testing

This document specifies conformance criteria for both bitstreams and decoders compliant with the MPEG-H 3D audio standard as defined in ISO/IEC 23008-3. This is done to assist implementers and to ensure interoperability.

Technologies de l'information — Codage à haut rendement et fourniture de supports dans les environnements hétérogènes — Partie 9: Essais de conformité 3D Audio

General Information

• Status: Withdrawn
• Publication Date: 14-Jan-2019
• ICS: 35.040 - Information coding
• ICS: 35.040.40 - Coding of audio, video, multimedia and hypermedia information
• Technical Committee: ISO/IEC JTC 1/SC 29 - Coding of audio, picture, multimedia and hypermedia information
• Drafting Committee: ISO/IEC JTC 1/SC 29 - Coding of audio, picture, multimedia and hypermedia information
• Current Stage: 9599 - Withdrawal of International Standard
• Start Date: 24-Mar-2022
• Completion Date: 30-Oct-2025

Relations

• Revised: ISO/IEC 23008-9:2022 - Information technology - High efficiency coding and media delivery in heterogeneous environments - Part 9: 3D Audio conformance testing
• Effective Date: 10-Jul-2021

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 23008-9
First edition
2019-01
Information technology — High
efficiency coding and media delivery
in heterogeneous environments —
Part 9:
3D Audio conformance testing
Technologies de l'information — Codage à haut rendement et
fourniture de supports dans les environnements hétérogènes —
Partie 9: Essais de conformité 3D Audio
Reference number
©
ISO/IEC 2019
© ISO/IEC 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2019 – All rights reserved

Contents Page
Foreword .vii
Introduction .viii
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 1
3.1 Terms and definitions . 1
3.2 Abbreviated terms . 2
4 MPEG-H 3D audio conformance testing . 3
4.1 General . 3
4.2 Profiles . 3
4.3 Test procedure . 3
4.3.1 General. 3
4.3.2 Naming convention . 4
4.3.3 Conformance test tools . 6
5 MPEG-H 3D audio bitstreams . 6
5.1 Characteristics, test procedure . 6
5.2 MPEG-H 3D audio general configuration . 7
5.2.1 mpegh3daConfig(). 7
5.2.2 FrameworkConfig3d() . 7
5.2.3 Signals3d() . 7
5.2.4 SpeakerConfig3d() . 7
5.2.5 mpegh3daFlexibleSpeakerConfig() . 8
5.2.6 mpegh3daSpeakerDescription() . 8
5.3 MPEG-H 3D core audio configuration . 8
5.3.1 mpegh3daDecoderConfig() . 8
5.3.2 mpegh3daSingleChannelElementConfig() . 8
5.3.3 mpegh3daChannelPairElementConfig() . 8
5.3.4 mpegh3daCoreConfig() . 9
5.3.5 mpegh3daLfeElementConfig(). 9
5.3.6 mpegh3daExtElementConfig() . 9
5.3.7 mpegh3daConfigExtension() .10
5.3.8 SbrConfig() .10
5.3.9 Mps212Config() .10
5.4 MPEG-H 3D core audio frame .10
5.4.1 mpegh3daFrame().10
5.4.2 mpegh3daSingleChannelElement() .11
5.4.3 mpegh3daChannelPairElement() . .11
5.4.4 mpegh3daLfeElement() .11
5.4.5 mpegh3daExtElement() .11
5.4.6 ics_info() .12
5.4.7 mpegh3daCoreCoderData() .12
5.4.8 StereoCoreToolInfo() .12
5.4.9 fd_channel_stream() .13
5.4.10 lpd_channel_stream() .13
5.4.11 acelp_coding() .14
5.4.12 tcx_coding () .14
5.4.13 lpd_stereo_stream() .15
5.4.14 igf_stereo_pred_data() .15
5.4.15 igf_data() .15
5.4.16 tbe_data() .16
5.4.17 tw_data() .16
5.4.18 scale_factor_data() . .16
© ISO/IEC 2019 – All rights reserved iii

5.4.19 tns_data() .16
5.4.20 ac_spectral_data() .16
5.4.21 arith_data() .16
5.4.22 fac_data() .16
5.4.23 code_book_indices() .17
5.4.24 UsacSbrData() .17
5.4.25 Mps212Data() .17
5.5 Fill element .17
5.6 MPEG surround configuration, SpatialSpecificConfig() .17
5.7 MPEG surround frame, SpatialFrame() .17
5.8 SAOC configuration, SAOCSpecificConfig() .17
5.9 SAOC frame, SAOCFrame() .17
5.10 AudioPreRoll .17
5.10.1 Recursive presence of AudioPreRoll extension payload .17
5.10.2 AudioPreRoll() .18
5.11 Dynamic range control configuration .18
5.11.1 mpegh3daUniDrcConfig() .18
5.11.2 mpegh3daUniDrcChannelLayout() .18
5.11.3 drcCoefficientsUniDrc() .18
5.11.4 drcInstructionsUniDrc() .18
5.11.5 uniDrcConfigExtension() .18
5.12 Dynamic range control frame, uniDrcGain() .18
5.13 Object metadata configuration, ObjectMetadataConfig() .19
5.14 Object metadata frame .19
5.14.1 object_metadata_efficient() .19
5.14.2 object_metadata() .19
5.14.3 object_metadata_efficient() .19
5.14.4 intracoded_object_metadata_efficient() .19
5.14.5 differential_object_metadata().20
5.14.6 offset_data() .21
5.14.7 object_metadata_low_delay().21
5.14.8 intracoded_object_metadata_low_delay() .21
5.14.9 dynamic_object_metadata() .23
5.14.10 single_dynamic_object_metadata() .23
5.15 EnhancedObjectMetadataConfig() .24
5.16 EnhancedObjectMetadataFrame() .24
5.17 SAOC 3D Config .25
5.17.1 SAOC3DSpecificConfig() .25
5.17.2 SAOC3DgetNumChannels() .26
5.17.3 SAOC3DExtensionConfig() .26
5.17.4 SAOC3DExtensionConfigData() .26
5.17.5 SAOCExtensionConfig() .26
5.18 SAOC 3D frame .26
5.18.1 Saoc3DFrame().26
5.18.2 SAOC3DFramingInfo() .26
5.18.3 EcDataSaoc() .26
5.18.4 ByteAlign() .26
5.18.5 SAOC3DExtensionFrame() .26
5.18.6 SAOC3DExtensionFrameData() .26
5.18.7 SAOCExtensionFrame() .27
5.18.8 HOAConfig() .27
5.18.9 HOADecoderConfig().27
5.18.10 HOAEnhConfig() .27
5.18.11 HOADecoderEnhConfig () .27
5.18.12 getSubbandWidths () .28
5.19 HOA frame .28
5.19.1 HOAFrame() .28
5.19.2 HOAEnhFrame ().28
iv © ISO/IEC 2019 – All rights reserved

5.19.3 ChannelSideInfoData() .28
5.19.4 AddAmbHoaInfoChannel() .29
5.19.5 HOAGainCorrectionData() .29
5.19.6 VVectorData() .29
5.19.7 HOAPredictionInfo().29
5.19.8 HOADirectionalPredictionInfo() .30
5.19.9 readDirPredDiffValues() .30
5.19.10 HOAParInfo () .30
5.19.11 readParDiffValues () .30
5.20 FMT converter frame, FormatConverterFrame() .31
5.21 Multi-channel coding tool config, MCTConfig () .31
5.22 Multi-channel coding tool frame .31
5.22.1 MultichannelCodingBoxRotation () .31
5.22.2 MultichannelCodingBoxPrediction () .31
5.22.3 MultichannelCodingFrame() .32
5.23 Tonal component coding configuration, TccConfig () .32
5.24 Tonal component coding frame .32
5.24.1 General.32
5.24.2 TccGroupOfSegments() .32
5.25 HREP config, HREPConfig() .33
5.26 HREP frame, HREPFrame() .33
5.27 ICG config, ICGConfig () .33
5.28 SignalGroupInformation Config, SignalGroupInformation () .34
5.29 DownmixMatrix .34
5.29.1 downmixConfig().34
5.29.2 DownmixMatrixSet() .34
5.29.3 DownmixMatrix() .34
5.29.4 DecoderGainValue() .35
5.29.5 ReadRange() .35
5.29.6 EqualizerConfig() .35
5.30 Loudness info .36
5.30.1 mpegh3daLoudnessInfoSet() .36
5.30.2 loudnessInfo() .36
5.30.3 loudnessInfoSetExtension() .36
5.31 Audioscene info .36
5.31.1 mae_AudioSceneInfo .36
5.31.2 mae_Data() .37
5.31.3 mae_GroupDefinition() .37
5.31.4 mae_SwitchGroupDefinition() .38
5.31.5 mae_Description() .38
5.31.6 mae_ContentData() .38
5.31.7 mae_CompositePair() .38
5.31.8 mae_GroupPresetDefinition() .39
5.31.9 mae_ProductionScreenSizeData() .39
5.31.10 mae_LoudnessCompensationData () .40
5.31.11 mae_ProductionScreenSizeDataExtension() .40
5.31.12 mae_GroupPresetDefinitionExtension() .40
5.31.13 mae_DrcUserInterfaceInfo() .41
5.32 HOA matrix .42
5.32.1 HoaRenderingMatrixSet() .42
5.32.2 HoaRenderingMatrix() .42
5.32.3 DecoderHoaMatrixData() .42
5.32.4 DecoderHoaGainValue() .43
5.33 Restrictions depending on profiles and levels .43
5.33.1 General.43
5.33.2 Low complexity profile .43
6 MPEG-H 3D audio interfaces to the MPEG-H 3D audio decoder .47
6.1 Characteristics and test procedure .47
© ISO/IEC 2019 – All rights reserved v

6.2 Interface for local setup information .47
6.2.1 mpegh3daLocalSetupInformation() .47
6.2.2 LoudspeakerRendering() .47
6.2.3 BinauralRendering() .48
6.2.4 LocalScreenSizeInformation() .48
6.3 Interface for user interaction .48
6.3.1 mpegh3daElementInteraction() .48
6.3.2 ElementInteractionData () .48
6.3.3 ei_GroupInteractivityStatus () .48
6.3.4 LocalZoomAreaSize() .49
6.4 Interface for loudness normalization and dynamic range control .49
6.5 Interface for scene displacement data, mpegh3daSceneDisplacementData().49
7 MPEG-H 3D audio decoders .49
7.1 General .49
7.2 Basic conformance test conditions .50
7.2.1 Element configuration test condition .50
7.2.2 Sampling rate .51
7.2.3 Core mode tests [Fd|Lpd|Cct] .52
7.3 Additional test conditions .53
7.3.1 3D audio core (FD) .53
7.3.2 3D audio core (LPD).60
7.3.3 3D audio core (FD and LPD) .64
7.3.4 Object rendering .71
7.3.5 Higher order ambisonics (HOA) .73
7.3.6 Signalling of HOA rendering matrix [Hmx] .78
7.3.7 Downmix matrix test condition (dwx) .78
7.3.8 Dynamic range and loudness control .80
7.3.9 AudioPreRoll() condition, immediate playout frame (IPF) .84
7.4 Decoder settings .84
7.4.1 Target layout (Lay-) .84
7.4.2 Target loudness (Lou-) .86
7.4.3 DRC effect type request (Eff-) .87
7.4.4 Group preset request (Pr-) .87
7.4.5 Conformance point (Cpo-) .87
Bibliography .88
vi © ISO/IEC 2019 – All rights reserved

Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work. In the field of information technology, ISO and IEC have established a joint technical committee,
ISO/IEC JTC 1.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for
the different types of document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent
rights. Details of any patent rights identified during the development of the document will be in the
Introduction and/or on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see: www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
© ISO/IEC 2019 – All rights reserved vii

Introduction
This document specifies how tests can be designed to verify whether bitstreams and decoders meet
the requirements as specified in ISO/IEC 23008-3 and allow interoperability with remote terminals in
interactive, broadcast, streaming and local (with stored contents) sessions. These tests can be used for
various purposes, such as:
— manufacturers of encoders, and their customers, can use the tests to verify whether the encoder
produces bitstreams compliant with ISO/IEC 23008-3,
— manufacturers of decoders and their customers can use the tests to verify whether the decoder
meets the requirements specified in ISO/IEC 23008-3 for the claimed decoder capabilities,
— manufacturers and customers of terminals supporting interactive, broadcast, streaming, and local
sessions over a multitude of transport protocols and networks, can use the tests to verify whether
the claimed functionalities are compliant with ISO/IEC 23008-3,
— manufacturers of test equipment, and their customers can use the tests to verify compliance with
ISO/IEC 23008-3.
viii © ISO/IEC 2019 – All rights reserved

INTERNATIONAL STANDARD ISO/IEC 23008-9:2019(E)
Information technology — High efficiency coding and
media delivery in heterogeneous environments —
Part 9:
3D Audio conformance testing
1 Scope
This document specifies conformance criteria for both bitstreams and decoders compliant with the
MPEG-H 3D audio standard as defined in ISO/IEC 23008-3. This is done to assist implementers and to
ensure interoperability.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO/IEC 23003-1:2007/Amd.1:2008, Information technology — MPEG audio technologies — Part 1: MPEG
Surround — Amendment 1: Conformance testing
ISO/IEC 23003-2:2010/Amd.4:2016, Information technology — MPEG audio technologies — Part 2: Spatial
Audio Object Coding (SAOC) — Amendment 4: SAOC Conformance
ISO/IEC 23003-3:2012, Information technology — MPEG audio technologies — Part 3: Unified speech and
audio coding
1)
ISO/IEC 23003-4:— , Information technology — MPEG audio technologies — Part 4: Dynamic range control
2)
ISO/IEC 23008-3:— , Information technology — High efficient coding and media delivery in heterogeneous
environments — Part 3: 3D audio
ISO/IEC 23091-3, Information technology — Coding-independent code points — Part 3: Audio
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http: //www .electropedia .org/
— ISO Online browsing platform: available at https: //www .iso .org/obp
3.1.1
bitstream
encoded audio data
1) Under preparation. Stage at the time of publication: ISO/IEC FDIS 23003-4:2018.
2) Under preparation. Stage at the time of publication: ISO/IEC FDIS 23008-3:2018.
© ISO/IEC 2019 – All rights reserved 1

3.1.2
conformance test bitstream
MPEG-H 3DA encoded bitstream used for testing the conformance of a MPEG-H 3DA decoder
3.1.3
conformance test case
combination of one or more conformance test conditions for which one conformance test bitstream is
provided
3.1.4
conformance test condition
condition which applies to properties of a conformance test bitstream in order to test a certain
functionality of the MPEG-H 3DA decoder
3.1.5
conformance test criteria
one or more conformance test tools with requirements that define whether a given output from a
decoder under test fulfils the conformance
3.1.6
conformance test data
conformance test sequences and conformance criteria
3.1.7
conformance test sequences
generic term for conformance test bitstream and decoder settings with a corresponding reference
3.1.8
conformance test tool
tool to compare the reference waveform with the output from a decoder under test
3.1.9
decoder setting case
combination of one or more decoder setting conditions to trigger specific settings of the decoder
3.1.10
decoder setting condition
condition applied to the decoder behaviour in order to test functionality of the MPEG-H 3DA decoder
3.1.11
reference waveform
decoded counterpart of a conformance test bitstream with specific decoder settings
3.2 Abbreviated terms
3DA 3D audio
MPEG-H 3DA bitstream data encoded according to ISO/IEC 23008-3
MPEG-H 3DA CPE mpegh3daChannelPairElement
MPEG-H 3DA EXT mpegh3daExtElement
MPEG-H 3DA LFE mpegh3daLfeElement
MPEG-H 3DA SCE mpegh3daSingleChannelElement
2 © ISO/IEC 2019 – All rights reserved

4 MPEG-H 3D audio conformance testing
4.1 General
This clause specifies conformance criteria for both bitstreams and decoders compliant with ISO/
IEC 23008-3 as defined in this document. This is done to assist implementers and to ensure
interoperability.
4.2 Profiles
3)
Profiles are defined in ISO/IEC 23008-3:— , 4.8. Some conformance criteria apply to MPEG-H 3D audio
in general, while ot
...