ISO 1013:1995
(Main)Coke — Determination of bulk density in a large container
Coke — Determination of bulk density in a large container
Cancels and replaces the first edition (1975). Specifies a method for the determination of the bulk density of coke in a large container such as a wagon or skip.
Coke — Détermination de la masse volumique en vrac dans un récipient de grandes dimensions
Koks - Določanje nasipne gostote v veliki posodi
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST ISO 1013:1998
01-februar-1998
.RNV'RORþDQMHQDVLSQHJRVWRWHYYHOLNLSRVRGL
Coke -- Determination of bulk density in a large container
Coke -- Détermination de la masse volumique en vrac dans un récipient de grandes
dimensions
Ta slovenski standard je istoveten z: ISO 1013:1995
ICS:
75.160.10 Trda goriva Solid fuels
SIST ISO 1013:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 1013:1998
---------------------- Page: 2 ----------------------
SIST ISO 1013:1998
ISO
INTERNATIONAL
1013
STANDARD
Second edition
1995-07-01
Coke - Determination of bulk density in a
large Container
Coke - D&ermination de Ia masse volumique en vrac dans un rhpient
de grandes dimensions
Reference number
ISO 1013:1995(E)
---------------------- Page: 3 ----------------------
SIST ISO 1013:1998
ISO 1013:1995(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. l nternational organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 1013 was prepared by Technical Committee
lSO/TC 27, Solid mineral fuels, Subcommittee SC 3, Coke.
This second edition cancels and replaces the first edition
(ISO 1013:1975), which has been technically revised.
0 ISO 1995
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, rncluding photocopyrng and
microfilm, without Permission In writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1 211 Geneve 20 l Switzerland
Printed in Switzerland
ii
---------------------- Page: 4 ----------------------
SIST ISO 1013:1998
0 ISO
ISO 1013:1995(E)
Introduction
The bulk density of coke depends upon its physical characteristics, e.g.
apparent relative density, shape and size of the coke particles, and upon
the dimensions of the Container. If the Container is sufficiently large, its
actual dimensions will have a negligible effect on the value obtained in a
determination of bulk density. The method described in this International
Standard is based on the use of any suitable large Container, possibly that
in which the coke is delivered, such as a wagon or skip. The determination
of bulk density of coke in a small Container (of specified dimensions) is
described in ISO 567.
---------------------- Page: 5 ----------------------
SIST ISO 1013:1998
This page intentionally left blank
---------------------- Page: 6 ----------------------
SIST ISO 1013:1998
ISO 1013:1995(E)
INTERNATIONAL STANDARD 0 ISO
Coke - Determination of bulk density in a large
Container
5 Apparatus
1 Scope
This International Standard specifies a method for the
Container, such as a wagon or skip, capable of
...
ISO
INTERNATIONAL
1013
STANDARD
Second edition
1995-07-01
Coke - Determination of bulk density in a
large Container
Coke - D&ermination de Ia masse volumique en vrac dans un rhpient
de grandes dimensions
Reference number
ISO 1013:1995(E)
---------------------- Page: 1 ----------------------
ISO 1013:1995(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. l nternational organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 1013 was prepared by Technical Committee
lSO/TC 27, Solid mineral fuels, Subcommittee SC 3, Coke.
This second edition cancels and replaces the first edition
(ISO 1013:1975), which has been technically revised.
0 ISO 1995
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, rncluding photocopyrng and
microfilm, without Permission In writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1 211 Geneve 20 l Switzerland
Printed in Switzerland
ii
---------------------- Page: 2 ----------------------
0 ISO
ISO 1013:1995(E)
Introduction
The bulk density of coke depends upon its physical characteristics, e.g.
apparent relative density, shape and size of the coke particles, and upon
the dimensions of the Container. If the Container is sufficiently large, its
actual dimensions will have a negligible effect on the value obtained in a
determination of bulk density. The method described in this International
Standard is based on the use of any suitable large Container, possibly that
in which the coke is delivered, such as a wagon or skip. The determination
of bulk density of coke in a small Container (of specified dimensions) is
described in ISO 567.
---------------------- Page: 3 ----------------------
This page intentionally left blank
---------------------- Page: 4 ----------------------
ISO 1013:1995(E)
INTERNATIONAL STANDARD 0 ISO
Coke - Determination of bulk density in a large
Container
5 Apparatus
1 Scope
This International Standard specifies a method for the
Container, such as a wagon or skip, capable of
5.1
determination of the bulk density of coke in a large
holding at least 3 t of the Coke.
Container such as a wagon or skip.
5.2 Weighing machine, capable of weighing the
2 Normative references
Container and its contents to an accuracy of 0,2 %.
The following Standards contain provisions which,
through reference in this text, constitute provisions
6 Procedure
of this International Standard. At the time of publi-
cation, the editions indicated were valid. All Standards
Weigh the e
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.