ISO 15638-25:2024
(Main)Intelligent transport systems — Framework for collaborative telematics applications for regulated commercial freight vehicles (TARV) — Part 25: Overhead clearance monitoring
Intelligent transport systems — Framework for collaborative telematics applications for regulated commercial freight vehicles (TARV) — Part 25: Overhead clearance monitoring
This document specifies a freight vehicle safety information provisioning service application or function. It is intended for use within non-enforcement applications and potentially for regulated application services (RAS), for the road transport safety management purposes of regulated commercial freight vehicle movements. This document reinforces vehicle safety for non-enforcement purposes and other purposes by providing safety advisory information concerning overhead clearance provisions to freight vehicle drivers or operators transporting heavy goods on freight vehicles. This document specifies the framework for remote vehicle safety information provision for non-enforcement and for the conceptual operation of other management purpose applications. This document is intended to be beneficial to entities whose purpose is vehicle safety management. It provides additional use cases for TARV (telematics applications for regulated vehicles) service applications.
Systèmes de transport intelligents — Cadre pour applications télématiques coopératives pour véhicules réglementés (TARV) — Partie 25: Contrôle du dégagement aérien
General Information
Buy Standard
Standards Content (Sample)
International
Standard
ISO 15638-25
First edition
Intelligent transport systems —
2024-03
Framework for collaborative
telematics applications for
regulated commercial freight
vehicles (TARV) —
Part 25:
Overhead clearance monitoring
Systèmes de transport intelligents — Cadre pour applications
télématiques coopératives pour véhicules réglementés (TARV) —
Partie 25: Contrôle du dégagement aérien
Reference number
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms. 2
5 Conformance . 2
6 General overview and framework . 2
7 Basic conceptual operational requirements . 5
7.1 General .5
7.2 Basic requirement .6
8 Requirements for services using generic vehicle data . 6
8.1 General .6
8.1.1 Introduction .6
8.1.2 Unregulated application services using only generic basic vehicle data .7
8.1.3 Unregulated application services using both generic vehicle data and additional
application-specific data .7
8.2 Conveyance identifiers .7
9 Concept of operations for unregulated application services with additional data
requirements including roadside sensors . 7
9.1 General .7
9.2 Strategies, tactics, policies and constraints affecting the system .7
9.3 Organizations, activities, and interactions among participants and stakeholders .8
9.4 Operational roles and processes for the system .8
9.4.1 Common role of the prime service provider .8
9.4.2 Common role of the application service provider . .9
9.4.3 Role of the application service .9
9.4.4 Service requirements definition .9
9.4.5 Common role of user .9
9.4.6 Role of driver .10
9.4.7 Role of operator .10
9.4.8 Framework for operation .10
9.4.9 ROAM "app" library and data pantry .11
10 Sequence of operations for identified unregulated application services with additional
data requirements .11
10.1 Overview .11
10.1.1 General .11
10.1.2 Commands . 12
10.2 Quality of service requirements . 15
10.3 Test requirements. 15
10.4 Marking, labelling and packaging.16
11 Common features of unregulated TARV application services .16
11.1 Generic operational processes for the system .16
11.2 Common characteristics for instantiations of unregulated application services .17
11.3 Common sequence of operations for unregulated application services .18
11.4 Quality of service . .19
11.5 Information security .19
11.6 Software engineering quality systems .19
11.7 Quality monitoring station .19
11.8 Audits .19
iii
11.9 Data access control policy .19
11.10 Approval of roadside sensors .19
Annex A (informative) Application examples .20
Bibliography .23
iv
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 204, Intelligent transport systems.
A list of all parts in the ISO 15638 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
v
Introduction
Regions around the world share a common global target of achieving a safe and sustainable society. However,
the number of bridge strike incidents caused by freight vehicles is increasing worldwide. Within this
context, monitoring information provisioning to vehicles carrying freights which are higher than a bridge
girder bottom is recommended. This can be made possible by building on the framework of ISO 15638-21
(TARV; telematics applications for regulated vehicles). This document defines an unregulated TARV service
application framework for overhead clearance monitoring information provisioning.
The principle of overhead clearance monitoring information provisioning is that the ser
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.