ISO 5640:2024
(Main)Industrial valves — Mounting kits for part-turn valve actuator attachment
Industrial valves — Mounting kits for part-turn valve actuator attachment
This document provides requirements for metallic mounting kits for part-turn valves and actuator attachments. It includes all components transmitting torques from actuators to valves with a maximum flange torque up to 16 000 Nm (up to F30 flange type). It applies to mounting kits for part-turn valves and actuators with integral attachment flanges and drive components as described in ISO 5211, when direct mounting of the actuator on valve is not practical. Stacking of mounting kits/intermediate supports is not within the scope of this document. This document specifies methods for design and environmental corrosion protection. When a reference is made to this document, all the requirements apply, unless otherwise agreed between the purchaser and the manufacturer/supplier, prior to order. In this document, the term "valve" covers valve or shaft extension top-flange, and the term “actuator” covers part-turn actuator or combination of multi-turn actuator and gearbox. Control valves are excluded from this document.
Robinetterie industrielle — Kits de montage de raccordement des actionneurs à fraction de tour
General Information
Buy Standard
Standards Content (Sample)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 5640
ISO/TC 153
Industrial valves — Mounting kits for
Secretariat: AFNOR
part-turn valve actuator attachment
Voting begins on:
2023-10-12
Robinetterie industrielle - Kits de montage de raccordement des
actionneurs à fraction de tour
Voting terminates on:
2023-12-07
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 5640:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 1 ----------------------
ISO/FDIS 5640:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 5640
ISO/TC 153
Industrial valves — Mounting kits for
Secretariat: AFNOR
part-turn valve actuator attachment
Voting begins on:
Robinetterie industrielle - Kits de montage de raccordement des
actionneurs à fraction de tour
Voting terminates on:
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
ISO/FDIS 5640:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
© ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 2 ----------------------
ISO/FDIS 5640:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 2
4 Design requirements .3
4.1 General . 3
4.2 Materials . 3
4.3 Design temperature . 3
4.4 Environmental corrosion protection . 3
4.5 Mounting kit . . 4
4.5.1 Stiffness . 4
4.5.2 Intermediate support style .
...
© ISO 2023 – All rights reserved
ISO/FDIS 5640:2023(E)
2023-08-22
ISO/TC 153
Secretariat: AFNOR
Date: 2023-09-28
Industrial valves — Mounting kits for part-turn valve actuator
attachment
Robinetterie industrielle — - Kits de montage de raccordement des actionneurs à fraction de tour
FDIS stage
© ISO 2023 – All rights reserved
---------------------- Page: 1 ----------------------
ISO/FDIS 5640:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/FDIS 5640:2023(E)
Contents
Foreword . v
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 2
4 Design requirements . 3
4.1 General . 3
4.2 Materials . 3
4.3 Design temperature . 3
4.4 Environmental corrosion protection . 4
4.5 Mounting kit . 4
4.5.1 Stiffness . 4
4.5.2 Intermediate support style . 5
4.6 Bolting . 5
4.7 Coupling . 6
4.8 Designation . 7
4.9 Position indicator . 7
4.10 Buried service . 7
4.11 Safety requirement . 7
4.12 Orientation . 7
4.13 Additional means for support of the actuator . 7
4.14 Valve/actuator package maintenance .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.