ISO 15611:2024
(Main)Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience
Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience
This document gives the necessary information to explain the requirements referenced in ISO 15607 about the qualification of welding procedures based on previous welding experience. In addition, it gives the range of qualification. The use of this document can be restricted by an application standard or a specification.
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Qualification sur la base de l'expérience en soudage
Le présent document donne les informations nécessaires pour expliquer les exigences référencées dans l’ISO 15607 concernant la qualification d'un mode opératoire de soudage sur la base de l'expérience en soudage. De plus, il donne le domaine de validité de la qualification. L'emploi du présent document peut être limité par une norme d'application ou une spécification.
General Information
Relations
Buy Standard
Standards Content (Sample)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 15611
ISO/TC 44/SC 10
Specification and qualification of
Secretariat: DIN
welding procedures for metallic
Voting begins on:
2023-10-09 materials — Qualification based on
previous welding experience
Voting terminates on:
2023-12-04
Descriptif et qualification d'un mode opératoire de soudage pour les
matériaux métalliques — Qualification sur la base de l'expérience en
soudage
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 15611:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 1 ----------------------
ISO/FDIS 15611:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 15611
ISO/TC 44/SC 10
Specification and qualification of
Secretariat: DIN
welding procedures for metallic
Voting begins on:
materials — Qualification based on
previous welding experience
Voting terminates on:
Descriptif et qualification d'un mode opératoire de soudage pour les
matériaux métalliques — Qualification sur la base de l'expérience en
soudage
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
ISO/CEN PARALLEL PROCESSING
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
ISO/FDIS 15611:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
© ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 2 ----------------------
ISO/FDIS 15611:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope .1
2 Normative references .1
3 Terms and definitions .1
4 Preliminary welding procedure specifications (pWPS) .1
5 Qualification of the welding procedure . 2
6 Existing previous welding experience . 2
7 Range of qualification . 2
8 Welding Procedure Qualification Record (WPQR) . 2
iii
© ISO 2023 – All rights reserved
---------------------- Page: 3 ----------------------
ISO/FDIS 15611:2023(E)
Foreword
ISO (the International Organization for
...
Draft ISO/FDIS 15611:2023(E)
ISO/TC 44/SC 10/WG 5
Date: 2023-06-22
Secretariat: DIN
Date: 2023-09-18
Specification and qualification of welding procedures for metallic
materials — Qualification based on previous welding experience
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques —
Qualification sur la base de l'expérience en soudage
FDIS stage
---------------------- Page: 1 ----------------------
Draft ISO/FDIS 15611:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Fax: +41 22 749 09 47
EmailE-mail: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ii © ISO 2023 – All rights reserved
© ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
Draft ISO/FDIS 15611:2023(E)
Contents
Foreword . iv
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Preliminary welding procedure specifications (pWPS) . 1
5 Qualification of the welding procedure . 2
6 Existing previous welding experience . 2
7 Range of qualification . 2
8 Welding Procedure Qualification Record (WPQR) . 2
© ISO 2023 – All rights reserved iii
© ISO 2023 – All rights reserved iii
---------------------- Page: 3 ----------------------
Draft ISO/FDIS 15611:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawnISO draws attention to the possibility that some of the elementsimplementation of this
document may beinvolve the subjectuse of (a) patent(s). ISO takes no position concerning the evidence,
validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of
this document, ISO had not received notice of (a) patent(s) which may be required to implement this
document. However, implementers are cautioned that this may not represent the latest information,
which may be obtained from the patent database available at www.iso.org/patents. ISO shall not be held
responsible for identifying any or all such patent rights. Details of any patent rights identified during
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.