SIST EN ISO 8662-9:2000

Hand-held portable power tools - Measurement of vibrations at the handle - Part 9: Rammers (ISO 8662-9:1996)

This part of ISO 8662 specifies a laboratory methos of measuring the vibrations at the handles of rammers, backfill-rammers, pawing rammers and sand rammers for use in foundries, on building sites, etc. It is a type test procedure for establishing the magnitude of vibrations at the handles of the power tool when operating on the specified load.  It is intended that the results obtained be used to compare different power tools or different models of the same type of power tool. Although the magnitudes measured are obtained in an artificial operation, they will give an indication of the values that would be found in a real work situation.

Handgehaltene motorbetriebene Maschinen - Messung mechanischer Schwingungen am Handgriff - Teil 9: Stampfer (ISO 8662-9:1996)

Dieser Teil von ISO 8662 legt ein Laborverfahren zur Messung von Schwingungen an den Handgriffen von Formenstampfern und Stampfern zum Verdichten von Füllungen fest, wie sie in Gießereien, auf Baustellen usw. verwendet werden. Es handelt sich um ein Meßverfahren zur Ermittlung von Schwingungskennwerten an den Handgriffen ainer motorbetriebenen Maschine, die unter vorgegebener Belastung arbeitet.

Machines a moteur portatives - Mesurage des vibrations au niveau des poignées - Partie 9: Marteaux fouloirs (ISO 8662-9:1996)

Gnana ročna orodja - Meritve vibracij na ročajih - 9. del: Tolkači (ISO 8662-9:1996)

General Information

• Status: Withdrawn
• Publication Date: 31-Mar-2000
• Withdrawal Date: 23-Dec-2009
• ICS: 13.160 - Vibration and shock with respect to human beings
• ICS: 25.140.01 - Hand-held tools in general
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 24-Dec-2009
• Due Date: 16-Jan-2010
• Completion Date: 24-Dec-2009
• Directive: 89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Ref Project: EN ISO 8662-9:1996 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 9: Rammers (ISO 8662-9:1996)

Relations

• Replaced By: SIST EN ISO 28927-6:2010 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers (ISO 28927-6:2009)
• Effective Date: 01-Feb-2010

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8662-9:2000
01-april-2000
*QDQDURþQDRURGMD0HULWYHYLEUDFLMQDURþDMLKGHO7RONDþL,62
Hand-held portable power tools - Measurement of vibrations at the handle - Part 9:
Rammers (ISO 8662-9:1996)
Handgehaltene motorbetriebene Maschinen - Messung mechanischer Schwingungen am
Handgriff - Teil 9: Stampfer (ISO 8662-9:1996)
Machines a moteur portatives - Mesurage des vibrations au niveau des poignées - Partie
9: Marteaux fouloirs (ISO 8662-9:1996)
Ta slovenski standard je istoveten z: EN ISO 8662-9:1996
ICS:
13.160 Vpliv vibracij in udarcev na Vibration and shock with
ljudi respect to human beings
25.140.01 5RþQDRURGMDQDVSORãQR Hand-held tools in general
SIST EN ISO 8662-9:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8662-9:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 8662-9:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 8662-9:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 8662-9:2000

----------------------
...