iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 300 176-1 V1.3.2:2003

(Main)

Digital Enhanced Cordless Telecommunications (DECT); Approval test specification; Part 1: Radio

Digital Enhanced Cordless Telecommunications (DECT); Approval test specification; Part 1: Radio

To update ETS 300 176-1 based upon EN DEN-DECT-050115 which adds optional 4-level and 8-level modulation schemes to provide 2Mbit/s services.  Approved change requests to Edition 2 are also included.

Digitalne izboljšane brezvrvične telekomunikacije (DECT) – Specifikacija odobritvenega preskusa – 1. del: Radio

General Information

Status
Published
Publication Date
30-Nov-2003
ICS
33.070.30 - Digital Enhanced Cordless Telecommunications (DECT)
Technical Committee
SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2003
Due Date
01-Dec-2003
Completion Date
01-Dec-2003
Ref Project
ETSI EN 300 176-1 V1.3.2 (1999-06) - Digital Enhanced Cordless Telecommunications (DECT); Approval test specification; Part 1: Radio

Buy Standard

EN 300 176-1 V1.3.2:2003EN 300 176-1 V1.3.2:2003
PreviousNext
Standard
EN 300 176-1 V1.3.2:2003
English language
108 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.LNDFLMDDigital Enhanced Cordless Telecommunications (DECT); Approval test specification; Part 1: Radio33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 300 176-1 Version 1.3.2SIST EN 300 176-1 V1.3.2:2003en01-december-2003SIST EN 300 176-1 V1.3.2:2003SLOVENSKI
STANDARD



SIST EN 300 176-1 V1.3.2:2003



EN 300 176-1 V1.3.2 (1999-06)European Standard (Telecommunications series)Digital Enhanced Cordless Telecommunications (DECT);Approval test specification;Part 1: RadioSIST EN 300 176-1 V1.3.2:2003



ETSIETSI EN 300 176-1 V1.3.2 (1999-06)2ReferenceREN/DECT-040118-1 (1mo90j1c.PDF)KeywordsDECT, radio, testing, regulationETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/88Internetsecretariat@etsi.frIndividual copies of this ETSI deliverablecan be downloaded fromhttp://www.etsi.orgIf you find errors in the present document, send yourcomment to: editor@etsi.frCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1999.All rights reserved.SIST EN 300 176-1 V1.3.2:2003



ETSIETSI EN 300 176-1 V1.3.2 (1999-06)3ContentsIntellectual Property Rights.10Foreword.101Scope.112References.113Definitions and abbreviations.133.1Definitions.133.2Abbreviations.154General.164.1Document layout.164.1.1Test suites.164.1.2Test groups.164.1.3Test cases.164.2Presentation of equipment for testing purposes.174.2.1Choice of model for type examination.174.2.2Description of equipment.174.2.2.1Protocol Implementation Conformance Statement (PICS).174.2.2.2Protocol Implementation Extra Information for Testing (PIXIT).184.2.2.3Environmental test conditions.184.2.3Host connected equipment.184.2.4Applicant's declaration.184.3Applicability of type tests.184.3.1Equipment that includes only a DECT RF receiver.184.3.2Equipment that includes a radio transmitter.184.3.3Void.194.3.4Equipment with a synchronization port.194.3.5Equipment incorporating the IPEI (PPs only).194.3.6All FP equipment.194.3.7PPs with direct PP to PP communication option.194.3.8Installation related issues.194.3.9Wireless relay stations.194.3.10Provision of 2 Mbit/s services. Equipment that is capable of using 4-level and/or 8-level modulation.204.3.10.1Activation of higher level modulations when EUT is in test stand-by mode.204.3.11Equipment supporting additional carriers.204.4Interpretation of the measurement results.215General test requirements.215.1Test philosophy.215.2Test site.225.2.1Open air test site.225.2.1.1Description.225.2.1.2Calibration.235.2.2Anechoic chamber.245.2.2.1General.245.2.2.2Description.245.2.2.3Influence of parasitic reflections.265.2.2.4Calibration and mode of use.265.2.3Stripline coupler.265.2.3.1Description.265.2.3.2Calibration.265.2.3.3Mode of use.265.3Standard position.275.4Test antenna of the LT.27SIST EN 300 176-1 V1.3.2:2003



ETSIETSI EN 300 176-1 V1.3.2 (1999-06)45.5Substitution antenna.275.6Test fixture.285.6.1Description.285.6.1.1Calibration of the test fixture for the measurement of transmitter characteristics.285.6.1.2Calibration of the test fixture for the measurement of receiver characteristics.295.6.1.3Mode of use.295.6.2Equipment with a temporary or internal permanent antenna connector.295.6.2.1Equipment with a temporary antenna connector.305.7Indoor test site.305.7.1Description.305.7.2Test for parasitic reflections.315.7.3Calibration and mode of use.315.8Lower Tester (LT).315.8.1Description.315.8.2Connections between the EUT and the LT.325.8.3Functions and abilities.325.8.4Signal generation uncertainty.335.8.4.1Modulated DECT-like carrier.335.8.4.2CW interferers.335.8.4.3DECT RF signal.335.8.4.4Test modulation signals.335.8.5Measurement uncertainty.345.9Upper Tester (UT).345.9.1Description of the UT.345.9.2The test standby mode.345.9.3Test messages.355.9.4Dummy setting when EUT is a RFP and it is in test stand-by mode.355.10Description of the lower tester FT and PT.355.11General test methods.365.11.1General.365.11.2Sampling the RF signal.365.11.2.1Introduction.365.11.2.2Sampling method.365.11.3Determining the reference position.365.11.3.1Case 1: EUTs that cannot transmit.365.11.3.2Case 2: EUTs that can transmit.365.11.4Bit Error Rate (BER) and Frame Error Ratio (FER) measurements.375.12Test setup.375.12.1Test setup 1.375.12.2Test setup 2.375.12.3Test setup 3.385.12.4Test setup 4.385.12.5Test setup 5.395.13Test arrangements for intermodulation measurements.395.13.1PT to PT arrangement.395.13.2FT to FT arrangement.405.13.3FT to PT arrangement.406Test conditions, power sources and ambient temperatures.416.1General.416.2Nominal test conditions.416.3Extreme test conditions.426.4Test power source - general requirements.436.5Nominal test power source.436.5.1Mains voltage.436.5.2Regulated lead acid battery power sources.436.5.3Nickel cadmium battery.436.5.4Other power sources.436.6Extreme test power source.436.6.1Mains voltage.436.6.2Regulated lead acid battery power sources.43SIST EN 300 176-1 V1.3.2:2003



ETSIETSI EN 300 176-1 V1.3.2 (1999-06)56.6.3Nickel cadmium battery.436.6.4Other power sources.446.7Testing of host connected equipment and plug-in cards.446.7.1Alternative A: composite equipment.446.7.2Alternative B: use of a test jig and three hosts.447Accuracy and stability of RF carriers.457.1Definition.457.2Test environment.457.3Method of measurement.457.4Verdict criteria when the EUT is a RFP.467.5Verdict criteria when the EUT is a PP.468Accuracy and stability of timing parameters.468.1Slot structure definitions.468.2Definition of the position of p0.478.3Measurement of packet timing jitter.478.3.1Test environment.478.3.2Method of measurement.488.3.3Verdict criteria.488.4Measurement of the reference timing accuracy of a RFP.488.4.1Test environment.488.4.2Method of measurement.488.4.3Verdict criteria.498.5Measurement of packet transmission accuracy of a PP.498.5.1Test environment.498.5.2Method of measurement.498.5.3Verdict criteria.509Transmission burst.509.1Definitions.509.1.1Physical packets.509.1.2Transmitted power.509.1.3Normal Transmitted Power (NTP).509.1.4Transmitter attack time.509.1.5Transmitter release time.509.1.6Minimum power.519.1.7Maximum power.519.1.8Maintenance of transmission after packet end.519.1.9Transmitter idle power output.519.2Test environment.519.3Method of measurement.519.4Verdict criteria.5210Transmitted power.5210.1Definitions.5210.1.1PP and RFP with an integral antenna.5210.1.2PP and RFP with external connections for all antennas.5210.1.3PP and RFP with both integral and external antennas.5310.2PP and RFP with an integral antenna.5310.2.1Test environment.5310.2.2Method of measurement.5310.2.2.1Measurement of NTP.5310.2.2.2Measurement of antenna gain.5310.2.3Verdict criteria for all EUTs.5410.3PP and RFP with external antenna connection(s).5410.3.1Test environment.5410.3.2Method of measurement.5410.3.3Verdict criteria for all EUTs.5511RF carrier modulation.5511.1Test environment.55SIST EN 300 176-1 V1.3.2:2003



ETSIETSI EN 300 176-1 V1.3.2 (1999-06)611.2Method of measurement, Parts 1 and 2.5511.2.1Part 1.5511.2.2Part 2.5611.3Method of measurement, parts 3 and 4.5611.3.1Part 3.5611.3.2Part 4.5611.4Verdict criteria for part 1.5711.5Verdict criteria for part 2.5711.6Verdict criteria for part 3.5711.7Verdict criteria for part 4.5712Unwanted RF power radiation.5812.1General test conditions.5812.2Emissions due to modulation.5812.2.1Definition.5812.2.2Test environment.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 300 175-7 V1.9.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security features
ETSI EN 300 175-7 V1.9.1 (2005-09)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document specifies the security architecture, the types of cryptographic algorithms required, the way in which they are to be used, and the requirements for integrating the security features provided by the architecture into the DECT CI. It also describes how the features can be managed and how they relate to certain DECT fixed systems and local network configurations.
The security architecture is defined in terms of the security services which are to be supported at the CI, the mechanisms which are to be used to provide the services, and the cryptographic parameters, keys and processes which are associated with these mechanisms.
The security processes specified in the present document are each based on one of two cryptographic algorithms:
• an authentication algorithm; and
• a key stream generator.
The architecture is, however, algorithm independent, and either the DECT standard algorithms, or appropriate proprietary algorithms, or indeed a combination of both can, in principle, be employed. The use of the employed algorithm is specified in the present document. Integration of the security features is specified in terms of the protocol elements and processes required at the Network (NWK) and Medium Access Control (MAC) layers of the CI. The relationship between the security features and various network elements is described in terms of where the security processes and management functions may be provided. The present document does not address implementation issues. For instance, no attempt is made to specify whether the DSAA should be implemented in the PP at manufacture, or whether the DSAA or a proprietary authentication algorithm should be implemented in a detachable module. Similarly, the present document does not specify whether the DSC
should be implemented in hardware in all PPs at manufacture, or whether special PPs should be manufactured with the DSC or proprietary ciphers built into them. The security architecture supports all these options, although the use of proprietary algorithms may limit roaming and the concurrent use of PPs in different environments.

  • Standard
    101 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-5 V1.9.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) layer
ETSI EN 300 175-5 V1.9.1 (2005-09)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document specifies the Network (NWK) layer. The NWK layer is part 5 of the EN 300 175 and layer 3 of the DECT protocol stack.The present document only specifies the C-plane (control plane) of the DECT NWK layer. It contains no specification for the U-plane (user plane) because the U-plane is null for all services at the DECT NWK layer. The C-plane contains all of the internal signalling information, and the NWK layer protocols are grouped into the following families of procedures:
• Call Control (CC);
• Supplementary Services (SS);
• Connection Oriented Message Service (COMS);
• ConnectionLess Message Service (CLMS);
• Mobility Management (MM);
• Link Control Entity (LCE).
The present document uses the layered model principles and terminology as described in ITU-T Recommendation X.200 and ITU-T Recommendation X.210.

  • Standard
    309 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-5 V1.8.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) layer
ETSI EN 300 175-5 V1.8.1 (2004-11)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document specifies the Network (NWK) layer. The NWK layer is part 5 of the EN 300 175 and layer 3 of the DECT protocol stack.The present document only specifies the C-plane (control plane) of the DECT NWK layer. It contains no specification for the U-plane (user plane) because the U-plane is null for all services at the DECT NWK layer. The C-plane contains all of the internal signalling information, and the NWK layer protocols are grouped into the following families of procedures:
- Call Control (CC);
- Supplementary Services (SS);
- Connection Oriented Message Service (COMS);
- ConnectionLess Message Service (CLMS);
- Mobility Management (MM);
- Link Control Entity (LCE).
The present document uses the layered model principles and terminology as described in ITU-T Recommendation X.200 and ITU-T Recommendation X.210.

  • Standard
    310 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-1 V1.8.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 1: Overview
ETSI EN 300 175-1 V1.8.1 (2004-11)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document contains an abstract of the other parts of the DECT standard together with a general description of:
- the objectives of the present document;
- the DECT Common Interface;
- the protocol architecture of DECT.
The present document also provides an extensive vocabulary; in particular it contains the common definitions of all the technical terms used in different parts of the present document.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-2 V1.9.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 2: Physical Layer (PHL)
ETSI EN 300 175-2 V1.9.1 (2005-09)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document of the DECT CI specifies the physical channel arrangements. DECT physical channels are radio communication paths between two radio end points. A radio end point is either part of the fixed infrastructure, a privately owned Fixed Part (FP), typically a base station, or a Portable Part (PP), typically a handset. The assignment of one or more particular physical channels to a call is the task of higher layers.
The Physical Layer (PHL) interfaces with the Medium Access Control (MAC) layer, and with the Lower Layer Management Entity (LLME). On the other side of the PHL is the radio transmission medium which has to be shared extensively with other DECT users and a wide variety of other radio services. The tasks of the PHL can be grouped into five categories:
a) to modulate and demodulate radio carriers with a bit stream of a defined rate to create a radio frequency channel;
b) to acquire and maintain bit and slot synchronization between transmitters and receivers;
c) to transmit or receive a defined number of bits at a requested time and on a particular frequency;
d) to add and remove the synchronization field and the Z-field used for rear end collision detection;
e) to observe the radio environment to report signal strengths.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-3 V1.8.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer
ETSI EN 300 175-3 V1.8.1 (2004-11)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document of the DECT CI specifies the Medium Access Control (MAC) layer. The MAC layer is part 3 of the DECT Common Interface standard and layer 2a of the DECT protocol stack. It specifies three groups of MAC services:
- the broadcast message control service;
- the connectionless message control service; and
- the multi-bearer control service.
It also specifies the logical channels that are used by the above mentioned services, and how they are multiplexed and mapped into the Service Data Units (SDUs) that are exchanged with the Physical Layer (PHL).

  • Standard
    238 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-4 V1.8.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 4: Data Link Control (DLC) layer
ETSI EN 300 175-4 V1.8.1 (2004-11)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI).
The present document specifies the Data Link Control (DLC) layer. The DLC layer is part 4 of the DECT CI standard and layer 2b of the DECT protocol stack.
Two planes of operation are specified for this DLC (sub)layer. These planes are called the Control plane (C-plane) and the User plane (U-plane). The C-plane is mostly concerned with the DECT signalling aspects. It provides a reliable point-to-point service that uses a link access protocol to offer error protected transmission of Network (NWK) layer messages. The C-plane also provides a separate point-to-multipoint (broadcast) service (Lb). The U-plane is only concerned with end-to-end user information. This plane contains most of the application dependent procedures of DECT. Several alternative services (both circuit-mode and packet-mode) are defined as a family of independent entities. Each service provides one or more point-to-point U-plane data links, where the detailed characteristics of those links are determined by the particular needs of each service. The defined services cover a wide range of performance, from "unprotected with low delay" for speech applications to "highly protected with variable delay", for local area network applications. The present document uses the layered model principles and terminology as described in ITU-T Recommendation X.200 [12] and ITU-T Recommendation X.210 [13].

  • Standard
    152 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 757 V1.5.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Low Rate Messaging Service (LRMS) including Short Messaging Service (SMS)
ETSI EN 300 757 V1.5.1 (2004-09)

The Low Rate Messaging Service (LRMS), specified in the present document, provides a means for the slow, acknowledged or unacknowledged, transfer of multimedia message objects, including the Short Message Service (SMS). It provides both point-to-point and point-to-multipoint messaging. This service may be used for private and public roaming applications. The present document defines the requirements on the Physical (PHY), Medium Access Control (MAC), Data Link Control (DLC) and Network (NWK) layers of DECT. The present document also specifies management entity requirements and generic interworking conventions, which ensure the efficient use of the DECT spectrum. The present document further mandates how to implement a GSM like Short Message Service (SMS), Point-to-point (PTP), which uses a sub-set of the Low Rate Messaging Service (LRMS) mentioned before as a bearer service.
SMS-PTP includes the following two services:
- SMS Mobile Originated (SMS-MO), for transport of short messages from PT to FT;
- SMS Mobile Terminated (SMS-MT), for transport of short messages from FT to PT.
Definition of Point-To-Multipoint (PTM) SMS is outside the scope of the present document. In order to facilitate re-use of excising GSM Service Centres, the present document applies the upper GSM protocols up-to and including the GSM SMS-RP protocol. Therefore, interworking functions handling the encapsulation of GSM SMS-RP messages are specified. The SMS or LRMS applications are outside the scope of the present document. So is the network behind the FP. Any information provided concerning applications or the network behind the FP is provided for informative, descriptive reasons only.

  • Standard
    105 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-6 V1.8.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing
ETSI EN 300 175-6 V1.8.1 (2004-11)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document specifies the identities and addressing structure of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). There are four categories of identities to be used for identification and addressing in a general DECT environment.
These four categories are:
- Fixed Part (FP) identities;
- Portable Part (PP) identities;
- connection-related identities;
- equipment-related identities.
Fixed part identities and portable part identities are used for:
- access information from fixed parts to portable parts;
- access requests from portable parts;
- identification of portable parts;
- identification of fixed parts and radio fixed parts;
- paging;
- billing.
These identities support:
- different environments, such as residential, public or private;
- supply to manufacturers, installers, and operators of globally unique identity elements with a minimum of central administration;
- multiple access rights for the same portable;
- large freedom for manufacturers, installers, and operators to structure the fixed part identities, e.g. to facilitate provision of access rights to groups of DECT systems;
- roaming agreements between DECT networks run by the same or different owners/operators;
- indication of handover domains;
- indication of location areas, i.e. paging area;
- indication of subscription areas of a public service.
The present document also provides for length indicators and other messages that can override the default location and/or paging area and domain indications given by the structure of the identities.
Connection related identities are used to identify the protocol instances associated with a call and are used for peer-to-peer communication. Equipment related identities are used to identify a stolen PP and to derive a default identity coding for PP emergency call set-up.
Coding of identity information elements for higher layer messages is found in EN 300 175-5 [5], clause 7.7.
User authentication and ciphering need additional key information and is outside the scope of the present document, but is covered in other parts of EN 300 175 parts 1 to 8 [1] to [7], e.g. part 7.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-8 V1.9.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 8: Speech coding and transmission
ETSI EN 300 175-8 V1.9.1 (2005-09)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). This part of the DECT CI specifies the speech coding and transmission requirements. In order to ensure satisfactory interworking of different portable and fixed units, it is necessary to specify the transmission performance of the analogue information over the digital link. This requires not only use of a common speech algorithm, but also standardization of frequency responses, reference speech levels (or loudness) at the air interface and various other parameters. The present document applies to DECT equipment which includes all the necessary functions to provide real-time two-way speech conversation. A 3,1 kHz telephony teleservice conveyed over a DECT link (including Fixed Part (FP) and Portable Part (PP)) which is capable of being connected (directly or indirectly) to the public network access point should comply with the requirements in the present document. Tethered fixed point local loop applications are not required to comply with the requirements of the present document. The speech performance characteristics defined in the present document typically conform to TBR 008 (see bibliography), which specifies the overall performance between the handset acoustic interface and a 64 kbit/s A-law Pulse Code Modulated (PCM) digital network interface. The deviations from TBR 008 are mainly due to the consequences of non-PCM coding and transmission delay.
The additional features described in clause 8 are those which are not included in TBR 008, but which are likely to occur in a DECT system: analogue interface, loudspeaking and hand-free facilities, tandeming with a mobile radio network. Headsets are not covered by the present specifications. For the DECT systems which connect to the Public Switched Telephone Network (PSTN) via an analogue interface, the additional requirements, which are implemented in the FP, have as much as possible been aligned with TBR 038 (see bibliography).
A summary of the control and the use of the DECT echo control functions, to guide on need for options to manufacturers and installers, is found in annex A. Information concerning test methods can be found in EN 300 176 [3]. The test methods take into account that DECT is a digital system.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day