SIST EN IEC 62841-4-6:2024/A11:2024
(Amendment)Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-6: Particular requirements for garden blowers, garden vacuums and garden blower/vacuums
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-6: Particular requirements for garden blowers, garden vacuums and garden blower/vacuums
2021-05-14: This prAA includes CMs to EN IEC (PR=72116), both PRs to be circulated simultaneously
D164/C043: DOW=DOR+48 months
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 4-6: Besondere Anforderungen für Gartenbläser, Gartensauger und Gartenbläser/-sauger
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 4-6: Exigences particulières pour les souffleurs, les aspirateurs de jardin et les souffleurs/aspirateurs de jardin
No scope available
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 4-6. del: Posebne zahteve za vrtne pihalnike, vrtne sesalnike in vrtne pihalnike/sesalnike - Dopolnilo A11
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2024
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 4-
6. del: Posebne zahteve za vrtne pihalnike, vrtne sesalnike in vrtne
pihalnike/sesalnike - Dopolnilo A11
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 4-6: Particular requirements for garden blowers, garden
vacuums and garden blower/vacuums
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen - Sicherheit - Teil 4-6: Besondere Anforderungen für
Gartenbläser, Gartensauger und Gartenbläser/-sauger
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -
Sécurité - Partie 4-6: Exigences particulières pour les souffleurs, les aspirateurs de jardin
et les souffleurs/aspirateurs de jardin
Ta slovenski standard je istoveten z: EN IEC 62841-4-6:2024/A11:2024
ICS:
25.140.20 Električna orodja Electric tools
65.060.70 Vrtnarska oprema Horticultural equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62841-4-6:2024/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2024
ICS 25.140.20
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 4-6: Particular
requirements for garden blowers, garden vacuums and garden
blower/vacuums
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 4-6: Exigences transportable Werkzeuge und Rasen- und
particulières pour les souffleurs, les aspirateurs de jardin et Gartenmaschinen - Sicherheit - Teil 4-6: Besondere
les souffleurs/aspirateurs de jardin Anforderungen für Gartenbläser, Gartensauger und
Gartenbläser/-sauger
This amendment A11 modifies the European Standard EN IEC 62841-4-6:2024; it was approved by CENELEC on 2024-04-29. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62841-4-6:2024/A11:2024 E
Contents Page
European foreword . 3
1 Modification to Clause 1, “Scope” . 5
2 Modification to Clause 8, “Marking and instructions” . 5
3 Modifications to Annex I, “Measurement of noise and vibration emissions” . 6
4 Modification to Annex K, “Battery tools and battery packs” . 7
5 Addition of Annex ZA, “Normative references to international publications with their
corresponding European publications” . 7
6 Addition of Annex ZZ, “Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC [2006 OJ L157] aimed to be covered” .10
European foreword
This document (EN IEC 62841-4-6:2024/A11:2024) has been prepared by CLC/TC 116 “Safety and
environmental aspects of motor-operated electric tools”.
The following dates are fixed:
• latest date by which this document has to be (dop) 2025-04-29
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2028-04-29
conflicting with this document have to be
withdrawn
This document modifies by common modifications EN IEC 62841-4-6:2024, which consists of the text of
116/622/FDIS (future IEC 62841-4-6, Ed. 1) prepared by IEC/TC 116 “Safety of motor-operated electric tools”.
If approved, this draft amendment will be published as EN IEC 62841-4-6:2024/A11:2024.
This series is divided into four parts.
Part 1: General requirements which are common to most hand-held electric motor operated tools (for the
purpose of this document referred to simply as tools) which could come within the scope of this document;
Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the requirements
given in Part 1 to account for the particular hazards and characteristics of these specific tools.
Part 4-6 will be used in conjunction with EN 62841-1:2015 + A11:2022.
Part 4-6 supplements or modifies the corresponding clauses in EN 62841-1:2015 + A11:2022, so as to convert
it into the European Standard: Particular requirements for blowers, garden vacuums and garden
blower/vacuums.
Where a particular subclause of Part 1 is not mentioned in Part 4-6, that subclause applies. When this document
states “addition”, “modification” or “replacement”, the relevant text in Part 1 is to be adapted accordingly.
The following print types are used:
— requirements; in roman type;
— test specifications: in italic type;
— notes: in smaller roman type.
The terms defined in Clause 3 are printed in bold typeface.
Subclauses, notes, tables and figures which are additional to those in Part 1 are numbered starting from 101.
Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 62841-4-6:2022
are prefixed “Z”.
This document follows the overall requirements of EN ISO 12100.
This document has been prepared under a Standardization Request addressed to CENELEC by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZZ, which is an integral part of this document.
Compliance with the clauses of Part 1 together with Part 4-6 provides one means of conforming with the
essential health and safety requirements of the Directive concerned.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A complete
listing of these bodies can be found on the CENELEC website.
1 Modification to Clause 1, “Scope”
Add the following to the existing Clause 1:
“This document covers all significant hazards, hazardous situations or hazardous events relevant for machines
covered by this document.
NOTE Z101 Essential requirements not mentioned in Table ZZ.1 are deemed to be not applicable, because the
corresponding hazards are either not relevant for machines covered by this document or do not require specific action by
the designer.”
2 Modification to Clause 8, “Marking and instructions”
Replace the text and NOTE after 8.14.2 c) 102) with the following:
“8.14.2 Za) Replacement:
Emissions:
1) The noise emission, measured in accordance with Clause I.2, as follows:
— A-weighted emission sound pressure level L and its uncertainty K , where L exceeds 70 dB(A).
pA pA pA
Where L does not exceed 70 dB(A), this fact shall be indicated;
pA
— A-weighted guaranteed sound power level L .
WA
2) Recommendation for the operator to wear hearing protection.
3) The vibration total value and its uncertainty measured in accordance with Clause I.3.
When the vibration total value does not exceed 2,5 m/s , this shall be stated.
When the vibration total value exceeds 2,5 m/s , its value shall be given in the instructions.
4) The following information:
— that the declared vibration total value(s) and the declared noise emission value(s) have been measured
in accordance with a standard test method and may be used for comparing one machine with another;
— that the declared vibration total value(s) and the declared noise emission value(s) may also be used
in a preliminary assessment of exposure.
5) A warning:
— that the vibration and noise emissions during actual use of the machine can differ from the declared
value depending on the ways in which the machine is used; and
— of the need to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the machine is switched off and when it is running idle in addition to the trigger time).”
3 Modifications to Annex I, “Measurement of noise and vibration emissions”
Replace the title of Annex I with the following:
“Annex I
(normative)
Measurement of noise and vibration emissions”
and delete the NOTE.
In I.2.2.1, replace the NOTE with the following one:
“
NOTE The determination of the sound power level in accordance with I.2.2.4 also provides the A-weighted measured and
guaranteed sound power level L required by
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.