SIST EN 301 908-3 V11.1.1:2016
(Main)IMT cellular networks - Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU - Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS)
IMT cellular networks - Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU - Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS)
The present document applies to the following equipment types:
1)Stations for IMT 2000 CDMA Direct Spread (UTRA FDD).
The present document covers requirements for UTRA FDD Base Stations for 3GPP Releases 99, 4, 5, 6, 7, 8, 9, 10 and 11. This includes the requirements for BS operating bands from 3GPP Release 12. In addition, the present document covers requirements for UTRA FDD Base Stations in the operating bands specified in ETSI TS 102 735 [i.4].
The present document contains requirements to demonstrate that Radio equipment both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference.
Celična omrežja IMT - Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU - 3. del: Bazne postaje s CDMA z neposrednim razprševanjem (“Direct Spread”) (UTRA FDD)
Ta dokument se uporablja za opremo naslednje vrste:
1) postaje za IMT 2000 CDMA z neposrednim razprševanjem (»Direct Spread«) (UTRA FDD)
Ta dokument zajema zahteve za bazne postaje UTRA FDD iz izdaj 99, 4, 5, 6, 7, 8, 9, 10 in 11 standarda 3GPP. To vključuje zahteve za pasove baznih postaj iz izdaje 12 standarda 3GPP. Poleg tega ta dokument zajema zahteve za bazne postaje UTRA FDD, ki delujejo v frekvenčnih pasovih, določenih v standardu ETSI TS 102 735 [i.4].
Ta dokument vsebuje zahteve, s katerimi se dokazuje, da radijska oprema učinkovito uporablja in tudi podpira učinkovito uporabo radijskega spektra, tako da ne pride do škodljivih motenj.
General Information
Buy Standard
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.GQLPIMT cellular networks - Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU - Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS)33.070.99Druge mobilne storitveOther mobile services33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:ETSI EN 301 908-3 V11.1.1 (2016-05)SIST EN 301 908-3 V11.1.1:2016en01-julij-2016SIST EN 301 908-3 V11.1.1:2016SLOVENSKI
STANDARD
SIST EN 301 908-3 V11.1.1:2016
ETSI EN 301 908-3 V11.1.1 (2016-05) IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS)
HARMONISED EUROPEAN STANDARD SIST EN 301 908-3 V11.1.1:2016
ETSI ETSI EN 301 908-3 V11.1.1 (2016-05)2
Reference REN/MSG-TFES-11-03-RED Keywords 3G, 3GPP, cellular, digital, E-UTRA, IMT, IMT-2000, IMT-Advanced, LTE, mobile, radio, regulation, UMTS, UTRA, WCDMA ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 908-3 V11.1.1:2016
ETSI ETSI EN 301 908-3 V11.1.1 (2016-05)3 Contents Intellectual Property Rights . 6 Foreword . 6 Modal verbs terminology . 6 Introduction . 6 1 Scope . 7 2 References . 7 2.1 Normative references . 7 2.2 Informative references . 8 3 Definitions, symbols and abbreviations . 9 3.1 Definitions . 9 3.2 Symbols . 11 3.3 Abbreviations . 12 4 Technical requirements specifications . 13 4.1 Environmental profile . 13 4.2 Conformance requirements . 13 4.2.1 Introduction. 13 4.2.2 Spectrum emissions mask . 16 4.2.2.1 Definition . 16 4.2.2.2 Limit . 16 4.2.2.3 Conformance . 23 4.2.3 Adjacent channel leakage power ratio (ACLR) . 24 4.2.3.1 Definition . 24 4.2.3.2 Limits . 24 4.2.3.3 Cumulative ACLR test requirement in non-contiguous spectrum or multiple-bands . 25 4.2.3.4 Conformance . 25 4.2.4 Transmitter spurious emissions . 26 4.2.4.1 Definition . 26 4.2.4.2 Limits . 26 4.2.4.2.1 Spurious emissions . 26 4.2.4.2.2 Co-existence with other systems . 27 4.2.4.2.3 Co-existence with services in adjacent frequency bands . 28 4.2.4.2.4 Protection of the BS receiver of own or different BS . 28 4.2.4.2.5 Co-existence with Home BS operating in other bands . 30 4.2.4.3 Conformance . 30 4.2.5 Base Station maximum output power . 30 4.2.5.1 Definition . 30 4.2.5.2 Limit . 30 4.2.5.3 Conformance . 30 4.2.6 Transmitter intermodulation . 31 4.2.6.1 Definition . 31 4.2.6.2 Limit . 31 4.2.6.3 Conformance . 32 4.2.7 Receiver spurious emissions . 32 4.2.7.1 Definition . 32 4.2.7.2 Limit . 32 4.2.7.3 Conformance . 32 4.2.8 Blocking characteristics . 32 4.2.8.1 Definition . 32 4.2.8.2 Limit . 33 4.2.8.3 Conformance . 37 4.2.9 Receiver intermodulation characteristics . 37 4.2.9.1 Definition . 37
SIST EN 301 908-3 V11.1.1:2016
ETSI ETSI EN 301 908-3 V11.1.1 (2016-05)4 4.2.9.2 Limit . 37 4.2.9.3 Conformance . 39 4.2.10 Receiver adjacent channel selectivity . 39 4.2.10.1 Definition . 39 4.2.10.2 Limit . 39 4.2.10.3 Conformance . 40 4.2.11 Home BS output power for adjacent channel protection . 40 4.2.11.1 Definition . 40 4.2.11.2 Limit . 40 4.2.11.3 Conformance . 41 4.2.12 Reference sensitivity level . 41 4.2.12.1 Definition . 41 4.2.12.2 Limit . 41 4.2.12.3 Conformance . 41 5 Testing for compliance with technical requirements . 41 5.1 Environmental conditions for testing . 41 5.2 Interpretation of the measurement results . 41 5.3 Essential radio test suites . 43 5.3.0 Introduction. 43 5.3.1 Spectrum emission mask . 43 5.3.1.0 General . 43 5.3.1.1 Initial conditions . 43 5.3.1.2 Procedures . 44 5.3.1.3 Test requirement . 44 5.3.2 Adjacent channel leakage power ratio (ACLR) . 44 5.3.2.1 Initial conditions . 44 5.3.2.2 Procedure . 45 5.3.2.3 Test requirement . 45 5.3.3 Transmitter spurious emissions . 45 5.3.3.0 General . 45 5.3.3.1 Initial conditions . 45 5.3.3.2 Procedure . 46 5.3.3.3 Test requirement . 46 5.3.4 Base Station maximum output power . 46 5.3.4.0 General . 46 5.3.4.1 Initial conditions . 46 5.3.4.2 Procedure . 46 5.3.4.3 Test requirement . 47 5.3.5 Transmit intermodulation . 47 5.3.5.0 General . 47 5.3.5.1 Initial conditions . 47 5.3.5.2 Procedures . 47 5.3.5.3 Test requirement . 48 5.3.6 Receiver spurious emissions . 48 5.3.6.0 General . 48 5.3.6.1 Initial conditions . 48 5.3.6.2 Procedure . 48 5.3.6.3 Test requirement . 49 5.3.7 Blocking characteristics . 49 5.3.7.0 General . 49 5.3.7.1 Initial conditions . 49 5.3.7.2 Procedure . 50 5.3.7.3 Test requirement . 50 5.3.8 Receiver intermodulation characteristics . 50 5.3.8.0 General . 50 5.3.8.1 Initial conditions . 50 5.3.8.2 Procedures . 51 5.3.8.3 Test requirement . 51 5.3.9 Receiver adjacent channel selectivity (ACS) . 51 5.3.9.0 General . 51 5.3.9.1 Initial conditions . 51 SIST EN 301 908-3 V11.1.1:2016
ETSI ETSI EN 301 908-3 V11.1.1 (2016-05)5 5.3.9.2 Procedure . 52 5.3.9.3 Test requirement . 52 5.3.10 Home BS output power for adjacent channel protection . 52 5.3.10.1 Initial conditions . 52 5.3.10.2 Procedure . 52 5.3.10.3 Test requirement . 53 5.3.11 Reference sensitivity level . 53 5.3.11.0 General . 53 5.3.11.1 Initial Conditions . 53 5.3.11.2 Procedure . 53 5.3.11.3 Test requirement . 54 Annex A (normative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 55 Annex B (normative): Base Station configurations . 57 B.1 Receiver diversity . 57 B.2 Duplexers . 57 B.3 Power supply options . 57 B.4 Ancillary RF amplifiers . 58 B.5 BS using antenna arrays . 58 B.5.0 Introduction . 58 B.5.1 Receiver tests . 59 B.5.2 Transmitter tests . 59 B.6 Transmit diversity and MIMO transmission . 59 B.7 BS with integrated Iuant BS modem . 60 Annex C (informative): Environmental profile specification . 61 Annex D (informative): Bibliography . 62 History . 63
SIST EN 301 908-3 V11.1.1:2016
ETSI ETSI EN 301 908-3 V11.1.1 (2016-05)6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https://ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). For non EU countries the present document may be used for regulatory (Type Approval) purposes. The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.1] to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC [i.2]. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. The present document is part 3 of a multi-part deliverable. Full details of the entire series can be found in part 1 [i.5].
National transposition dates Date of adoption of this EN: 20 April 2016 Date of latest announcement of this EN (doa): 31 July 2016 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 January 2017 Date of withdrawal of any conflicting National Standard (dow): 31 January 2018
Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The present document is part of a set of standards developed by ETSI that are designed to fit in a modular structure to cover radio equipment within the scope of the Radio Equipment Directive [i.2]. The present document is produced following the guidance in ETSI EG 203 336 [i.3] as applicable.
SIST EN 301 908-3 V11.1.1:2016
ETSI ETSI EN 301 908-3 V11.1.1 (2016-05)7 1 Scope The present document applies to the following equipment types: 1) Stations for IMT 2000 CDMA Direct Spread (UTRA FDD).
This radio equipment type is capable of operating in all or any part of the frequency bands given in table 1-1. Table 1-1: UTRA FDD Base Station operating bands UTRA FDD
band Direction of transmission UTRA FDD Base Station operating bands I Transmit 2 110 MHz to 2 170 MHz Receive 1 920 MHz to 1 980 MHz III Transmit 1 805 MHz to 1 880 MHz Receive 1 710 MHz to 1 785 MHz VII Transmit 2 620 MHz to 2 690 MHz Receive 2 500 MHz to 2 570 MHz VIII Transmit 925 MHz to 960 MHz Receive 880 MHz to 915 MHz XV Transmit 2 600 MHz to 2 620 MHz Receive 1 900 MHz to 1 920 MHz XVI Transmit 2 585 MHz to 2 600 MHz Receive 2 010 MHz to 2 025 MHz XX Transmit 791 MHz to 821 MHz Receive 832 MHz to 862 MHz XXII Transmit 3 510 MHz to 3 590 MHz Receive 3 410 MHz to 3 490 MHz XXXII (see note) Transmit 1 492 MHz to 1 496 MHz Receive - NOTE: The down link frequenc(ies) of this band are paired with the uplink frequenc(ies) of the other FDD band (external) of the dual band configuration.
The present document covers requirements for UTRA FDD Base Stations for 3GPP Releases 99, 4, 5, 6, 7, 8, 9, 10 and 11. This includes the requirements for BS operating bands from 3GPP Release 12. In addition, the present document covers requirements for UTRA FDD Base Stations in the operating
...
ETSI EN 301 908-3 V11.1.1 (2016-05)
HARMONISED EUROPEAN STANDARD
IMT cellular networks;
Harmonised Standard covering the essential requirements
of article 3.2 of the Directive 2014/53/EU;
Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS)
---------------------- Page: 1 ----------------------
2 ETSI EN 301 908-3 V11.1.1 (2016-05)
Reference
REN/MSG-TFES-11-03-RED
Keywords
3G, 3GPP, cellular, digital, E-UTRA, IMT,
IMT-2000, IMT-Advanced, LTE, mobile, radio,
regulation, UMTS, UTRA, WCDMA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 301 908-3 V11.1.1 (2016-05)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 8
3 Definitions, symbols and abbreviations . 9
3.1 Definitions . 9
3.2 Symbols . 11
3.3 Abbreviations . 12
4 Technical requirements specifications . 13
4.1 Environmental profile . 13
4.2 Conformance requirements . 13
4.2.1 Introduction. 13
4.2.2 Spectrum emissions mask . 16
4.2.2.1 Definition . 16
4.2.2.2 Limit . 16
4.2.2.3 Conformance . 23
4.2.3 Adjacent channel leakage power ratio (ACLR) . 24
4.2.3.1 Definition . 24
4.2.3.2 Limits . 24
4.2.3.3 Cumulative ACLR test requirement in non-contiguous spectrum or multiple-bands . 25
4.2.3.4 Conformance . 25
4.2.4 Transmitter spurious emis sions . 26
4.2.4.1 Definition . 26
4.2.4.2 Limits . 26
4.2.4.2.1 Spurious emissions . 26
4.2.4.2.2 Co-existence with other systems . 27
4.2.4.2.3 Co-existence with services in adjacent frequency bands . 28
4.2.4.2.4 Protection of the BS receiver of own or different BS . 28
4.2.4.2.5 Co-existence with Home BS operating in other bands . 30
4.2.4.3 Conformance . 30
4.2.5 Base Station maximum output power . 30
4.2.5.1 Definition . 30
4.2.5.2 Limit . 30
4.2.5.3 Conformance . 30
4.2.6 Transmitter intermodulation . 31
4.2.6.1 Definition . 31
4.2.6.2 Limit . 31
4.2.6.3 Conformance . 32
4.2.7 Receiver spurious emissions . 32
4.2.7.1 Definition . 32
4.2.7.2 Limit . 32
4.2.7.3 Conformance . 32
4.2.8 Blocking characteristics . 32
4.2.8.1 Definition . 32
4.2.8.2 Limit . 33
4.2.8.3 Conformance . 37
4.2.9 Receiver intermodulation characteristics . 37
4.2.9.1 Definition . 37
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 301 908-3 V11.1.1 (2016-05)
4.2.9.2 Limit . 37
4.2.9.3 Conformance . 39
4.2.10 Receiver adjacent channel selectivity . 39
4.2.10.1 Definition . 39
4.2.10.2 Limit . 39
4.2.10.3 Conformance . 40
4.2.11 Home BS output power for adjacent channel protection . 40
4.2.11.1 Definition . 40
4.2.11.2 Limit . 40
4.2.11.3 Conformance . 41
4.2.12 Reference sensitivity level . 41
4.2.12.1 Definition . 41
4.2.12.2 Limit . 41
4.2.12.3 Conformance . 41
5 Testing for compliance with technical requirements . 41
5.1 Environmental conditions for testing . 41
5.2 Interpretation of the measurement results . 41
5.3 Essential radio test suites . 43
5.3.0 Introduction. 43
5.3.1 Spectrum emission mask . 43
5.3.1.0 General . 43
5.3.1.1 Initial conditions . 43
5.3.1.2 Procedures . 44
5.3.1.3 Test requirement . 44
5.3.2 Adjacent channel leakage power ratio (ACLR) . 44
5.3.2.1 Initial conditions . 44
5.3.2.2 Procedure . 45
5.3.2.3 Test requirement . 45
5.3.3 Transmitter spurious emis sions . 45
5.3.3.0 General . 45
5.3.3.1 Initial conditions . 45
5.3.3.2 Procedure . 46
5.3.3.3 Test requirement . 46
5.3.4 Base Station maximum output power . 46
5.3.4.0 General . 46
5.3.4.1 Initial conditions . 46
5.3.4.2 Procedure . 46
5.3.4.3 Test requirement . 47
5.3.5 Transmit intermodulation . 47
5.3.5.0 General . 47
5.3.5.1 Initial conditions . 47
5.3.5.2 Procedures . 47
5.3.5.3 Test requirement . 48
5.3.6 Receiver spurious emissions . 48
5.3.6.0 General . 48
5.3.6.1 Initial conditions . 48
5.3.6.2 Procedure . 48
5.3.6.3 Test requirement . 49
5.3.7 Blocking characteristics . 49
5.3.7.0 General . 49
5.3.7.1 Initial conditions . 49
5.3.7.2 Procedure . 50
5.3.7.3 Test requirement . 50
5.3.8 Receiver intermodulation characteristics . 50
5.3.8.0 General . 50
5.3.8.1 Initial conditions . 50
5.3.8.2 Procedures . 51
5.3.8.3 Test requirement . 51
5.3.9 Receiver adjacent channel selectivity (ACS) . 51
5.3.9.0 General . 51
5.3.9.1 Initial conditions . 51
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 301 908-3 V11.1.1 (2016-05)
5.3.9.2 Procedure . 52
5.3.9.3 Test requirement . 52
5.3.10 Home BS output power for adjacent channel protection . 52
5.3.10.1 Initial conditions . 52
5.3.10.2 Procedure . 52
5.3.10.3 Test requirement . 53
5.3.11 Reference sensitivity level . 53
5.3.11.0 General . 53
5.3.11.1 Initial Conditions . 53
5.3.11.2 Procedure . 53
5.3.11.3 Test requirement . 54
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 55
Annex B (normative): Base Stat ion configurations . 57
B.1 Receiver diversity . 57
B.2 Duplexers . 57
B.3 Power supply options . 57
B.4 Ancillary RF amplifiers . 58
B.5 BS using antenna arrays . 58
B.5.0 Introduction . 58
B.5.1 Receiver tests . 59
B.5.2 Transmitter tests . 59
B.6 Transmit diversity and MIMO transmission . 59
B.7 BS with integrated Iuant BS modem . 60
Annex C (informative): Environmental profile specification . 61
Annex D (informative): Bibliography . 62
History . 63
ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 301 908-3 V11.1.1 (2016-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group
(MSG).
For non EU countries the present document may be used for regulatory (Type Approval) purposes.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.1] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.2].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
The present document is part 3 of a multi-part deliverable. Full details of the entire series can be found in part 1 [i.5].
National transposition dates
Date of adoption of this EN: 20 April 2016
Date of latest announcement of this EN (doa): 31 July 2016
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2017
Date of withdrawal of any conflicting National Standard (dow): 31 January 2018
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The present document is part of a set of standards developed by ETSI that are designed to fit in a modular structure to
cover radio equipment within the scope of the Radio Equipment Directive [i.2]. The present document is produced
following the guidance in ETSI EG 203 336 [i.3] as applicable.
ETSI
---------------------- Page: 6 ----------------------
7 ETSI EN 301 908-3 V11.1.1 (2016-05)
1 Scope
The present document applies to the following equipment types:
1) Stations for IMT 2000 CDMA Direct Spread (UTRA FDD).
This radio equipment type is capable of operating in all or any part of the frequency bands given in table 1-1.
Table 1-1: UTRA FDD Base Station operating bands
UTRA FDD Direction of transmission UTRA FDD Base Station operating bands
band
I Transmit 2 110 MHz to 2 170 MHz
Receive 1 920 MHz to 1 980 MHz
III Transmit 1 805 MHz to 1 880 MHz
Receive 1 710 MHz to 1 785 MHz
VII Transmit 2 620 MHz to 2 690 MHz
Receive 2 500 MHz to 2 570 MHz
VIII Transmit 925 MHz to 960 MHz
Receive 880 MHz to 915 MHz
XV Transmit 2 600 MHz to 2 620 MHz
Receive 1 900 MHz to 1 920 MHz
XVI Transmit 2 585 MHz to 2 600 MHz
Receive 2 010 MHz to 2 025 MHz
XX Transmit 791 MHz to 821 MHz
Receive 832 MHz to 862 MHz
XXII Transmit 3 510 MHz to 3 590 MHz
Receive 3 410 MHz to 3 490 MHz
XXXII Transmit 1 492 MHz to 1 496 MHz
(see note)
Receive -
NOTE: The down link frequenc(ies) of this band are paired with the uplink frequenc(ies) of the other
FDD band (external) of the dual band configuration.
The present document covers requirements for UTRA FDD Base Stations for 3GPP Releases 99, 4, 5, 6, 7, 8, 9, 10 and
11. This includes the requirements for BS operating bands from 3GPP Release 12. In addition, the present document
covers requirements for UTRA FDD Base Stations in the operating bands specified in ETSI TS 102 735 [i.4].
The present document contains requirements to demonstrate that Radio equipment both effectively uses and supports
the efficient use of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.