SIST EN 50288-4-1:2002

Multi-element metallic cables used in analogue and digital communication and control -- Part 4-1: Sectional specification for screened cables characterized up to 600 MHz - Horizontal and building backbone cables

Superseded by EN 50288-4-1:2003

Mehradrige metallische Daten- und Kontrollkabel für analoge und digitale Übertragung -- Teil 4-1: Rahmenspezifikation für geschirmte Kabel bis 600 MHz - Kabel für den Horizontal- und Steigbereich

Câbles métalliques à éléments multiples utilisés pour les transmissions et les commandes analogiques et numériques -- Partie 4-1: Spécification intermédiaire pour les câbles blindés pour applications jusqu'à 600 MHz - Câbles horizontaux et verticaux de bâtiment

Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterized up to 600 MHz - Horizontal and buiding backbone cables

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-2002
• Withdrawal Date: 31-Mar-2004
• ICS: 33.120.20 - Wires and symmetrical cables
• Technical Committee: iTEL - Communication cables
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Apr-2004
• Due Date: 01-Apr-2004
• Completion Date: 01-Apr-2004
• Ref Project: EN 50288-4-1:2001 - Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterized up to 600 MHz - Horizontal and building backbone cables

Relations

• Revised: SIST EN 50288-4-1:2004 - Multi-element metallic cables used in analogue and digital communication and control -- Part 4-1: Sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables
• Effective Date: 13-May-2010
• Replaced By: SIST EN 50288-4-1:2004 - Multi-element metallic cables used in analogue and digital communication and control -- Part 4-1: Sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables
• Effective Date: 29-Jan-2023
• Replaced By: SIST EN 50288-4-1:2004 - Multi-element metallic cables used in analogue and digital communication and control -- Part 4-1: Sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50288-4-1:2002
01-september-2002
Multi-element metallic cables used in analogue and digital communication and
control - Part 4-1: Sectional specification for screened cables characterized up to
600 MHz - Horizontal and buiding backbone cables
Multi-element metallic cables used in analogue and digital communication and control --
Part 4-1: Sectional specification for screened cables characterized up to 600 MHz -
Horizontal and building backbone cables
Mehradrige metallische Daten- und Kontrollkabel für analoge und digitale Übertragung --
Teil 4-1: Rahmenspezifikation für geschirmte Kabel bis 600 MHz - Kabel für den
Horizontal- und Steigbereich
Câbles métalliques à éléments multiples utilisés pour les transmissions et les
commandes analogiques et numériques -- Partie 4-1: Spécification intermédiaire pour les
câbles blindés pour applications jusqu'à 600 MHz - Câbles horizontaux et verticaux de
bâtiment
Ta slovenski standard je istoveten z: EN 50288-4-1:2001
ICS:
33.120.20 äLFHLQVLPHWULþQLNDEOL Wires and symmetrical
cables
SIST EN 50288-4-1:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50288-4-1:2002

---------------------- Page: 2 ----------------------

SIST EN 50288-4-1:2002
EUROPEAN STANDARD EN 50288-4-1
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2001
ICS 33.120.20
English version
Multi-element metallic cables used in analogue and digital
communication and control
Part 4-1: Sectional specification for screened cables
characterized up to 600 MHz -
Horizontal and building backbone cables
Câbles métalliques à éléments multiples Mehradrige metallische Daten- und
utilisés pour les transmissions et les Kontrollkabel für analoge und digitale
commandes analogiques et numériques Übertragung
Partie 4-1: Spécification intermédiaire Teil 4-1: Rahmenspezifikation für
pour les câbles blindés pour applications geschirmte Kabel bis 600 MHz -
jusqu'à 600 MHz - Kabel für den Horizontal- und
Câbles horizontaux et verticaux de Steigbereich
bâtiment
This European Standard was approved by CENELEC on 1999-10-01. CENELEC members are bound
to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any
other language made by translation under the responsibility of a CENELEC member into its own
language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50288-4-1:2001 E

---------------------- Page: 3 ----------------------

SIST EN 50288-4-1:2002
EN 50288-4-1:2001 - 2 -
Foreword
This European Standard was prepared by SC 46XC, Multicore, Multipair and Quad Data
communication cables, of Technical Committee CENELEC TC 46X, Communication cables.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by
CENELEC as EN 50288-4-1 on 1999-10-01.
The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2001-09-01
- latest date by which national standards
conflicting with the EN have to be withdrawn (dow) 2002-10-01
This part 4-1 is to be used in conjunction with EN 50288-1.

---------------------- Page: 4 ----------------------

SIST EN 50288-4-1:2002
- 3 - EN 50288-4-1:2001
Contents
1 Scope.4
2 Normative references .4
3 Definitions .4
4 Cable construction .4
4.1 Conductor.4
4.2 Insulation.4
4.3 Cabling elements.5
4.4 Identification of cabling elements .5
4.5 Screening of cabling elements .5
4.6 Cable make-up .5
4.7 Filling compound .5
4.8 Interstitial fillers.5
4.9 Screening of the cable core.5
4.10 Moisture barriers.5
4.11 Wrapping layers .5
4.12 Sheath.5
5 Tests and requirements for completed cables .6
5.1 Electrical tests .6
5.2 Mechanical tests.8
5.3 Environmental tests.8
5.4 Fire performance tests.8

---------------------- Page: 5 ----------------------

SIST EN 50288-4-1:2002
EN 50288-4-1:2001 - 4 -
1 Scope
This sectional specification covers screened cables, characterised up to 600 MHz, intended for
horizontal floor and building backbone wiring as defined in EN 50173.
The electrical, mechanical, transmission and environmental performance characteristics of the
screened cables, related to their reference test methods, are detailed.
This sectional specification is to be read in conjunction with EN 50288-1, the generic
specification for multi-element metallic cables used in analogue and digital communication and
control, which contains the essential
...