SIST-TS ETSI/TS 102 113-1 V1.1.2:2005

• Abstract:

  Add sentence on Eurescom in the Foreword.

• Status: Published
• Publication Date: 31-Dec-2004
• ICS: 33.040.35 - Telephone networks
• ICS: 33.070.50 - Global System for Mobile Communication (GSM)
• ICS: 33.080 - Integrated Services Digital Network (ISDN)
• Technical Committee: SPN - Services and Protocols for Networks
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-2005
• Due Date: 01-Jan-2005
• Completion Date: 01-Jan-2005
• Ref Project: ETSI TS 102 113-1 V1.1.2 (2002-09) - Services and Protocols for Advanced Networks (SPAN); Network Integration Testing between GSM Phase 2+, ISDN and PSTN; Part 1: Test Suite Structure and Test Purposes (TSS&TP)

ETSI TS 102 113-1 is a Technical Specification from ETSI TC SPAN for network integration testing between GSM Phase 2+, ISDN and PSTN. It specifies the Test Suite Structure and Test Purposes (TSS&TP) used to verify end-to-end compatibility across ISDN-GSM, PSTN-GSM, GSM-ISDN, GSM-PSTN and GSM-GSM interworking, for engineers and test teams who need to check call control and supplementary services.

What does SIST-TS ETSI/TS 102 113-1 V1.1.2:2005 specify?

SIST-TS ETSI/TS 102 113-1 V1.1.2:2005 specifies the TSS&TP for Network Integration Testing (NIT) between GSM Phase 2+, ISDN and non-ISDN PSTN networks. The document focuses on verifying overall compatibility over the national or international ISUP between networks, so the network path between the fixed and mobile sides behaves as expected in real service use.

The foreword says the document was produced by ETSI Technical Committee Services and Protocols for Advanced Networks (SPAN), and that it was developed by EURESCOM P1106 as Deliverable 2 Volume 1 before being made available to ETSI TC SPAN for publication.

The document is organized around:

• Clause 1 - Scope
• Clause 2 - References
• Clause 3 - Definitions and abbreviations
• Clause 5 - Numbering Scheme
• Clause 6 - Test Suite Structure (TSS)
• Clause 7 - Test purposes

Clause 5 gives the coding used to name tests, and Clause 6 groups the suite by network combinations and service categories. Clause 7 contains the individual test purposes.

What are the key requirements of SIST-TS ETSI/TS 102 113-1 V1.1.2:2005?

This ETSI TS is not a product standard with pass/fail limits for equipment performance. Its main job is to define how to structure and interpret conformance-style test purposes for interworking between GSM, ISDN and PSTN, and what each test is intended to verify.

Clause 5 - test naming and selection

Clause 5 defines a numbering scheme for test purposes. The code identifies the network of the A-, B-, C-, D- and E-subscriber, the bearer or teleservice, whether supplementary services are involved, and the test group name.

In practice, this matters because the test name tells you what setup the case covers - for example, whether the test is ISDN to GSM or GSM to GSM, whether it is a speech, audio, UDI or packet-service case, and whether it involves CLIP, CUG, Call Forwarding or another service. That makes the suite usable for test automation and for selecting only the relevant cases.

Clause 6 - how the suite is organized

Clause 6 groups the suite by interworking direction and by service class:

• ISDN-GSM
• PSTN-GSM
• GSM (Phase 2+) - ISDN
• GSM (Phase 2+) - PSTN
• GSM - GSM

Within these groups, the test suite separates circuit-switched call control services from packet services. In practice, this lets a lab or vendor validate the exact network boundary that matters, rather than treating all interworking as one general case.

Clause 7 - basic call behaviour

Clause 7 contains test purposes for successful and unsuccessful basic call handling. The test purposes check call establishment, call clearing, busy handling, call rejection, incomplete numbering, subscriber absent handling, and the transport of in-band tone or announcement information.

In practice, these cases show whether the network clears calls correctly and whether the right cause value and progress information reaches the calling side. That is important for user experience and for troubleshooting interworking failures.

Clause 7 - bearer and teleservice mapping

A major theme in the test purposes is correct mapping of bearer capability and related service information. The document exercises cases such as 3,1 kHz audio, speech, UDI, UDI/TA, V.110/X.30, facsimile group 3, telephony, videotelephony, HSCSD, and packet-related services.

In practice, this means the network must not only set up a call, but also carry the service identity correctly between ISDN and GSM. If the mapping is wrong, the wrong service may be offered at the far end even though the call connects.

Clause 7 - address and information transparency

The test purposes check the transport of calling party and connected party information, subaddress, User-user Signalling (UUS), progress indicators, and related presentation and screening indicators. The tests also cover cases where no digits should be exposed, or where the information must be network-provided.

In practice, this is what protects the service features seen by the called user and calling user. It also checks that addressing and supplementary information survive the fixed-mobile interworking path without being altered or lost.

Clause 7 - supplementary services

The document includes detailed test purposes for supplementary services such as CLIP, CLIR, COLP, COLR, CUG, SUB, CFU, CFB, CFNR, HOLD, CW, ECT, 3PTY, MPTY, MCID, TP and UUS1, including implicit and explicit UUS1 cases.

In practice, these tests show whether supplementary services are preserved, forwarded, rejected or notified correctly across ISDN and GSM interworking. This is often the part that breaks first when two networks are individually compliant but do not behave correctly together.

Clause 7 - GSM-GSM and packet services

The GSM-GSM section extends the suite beyond fixed-mobile interworking and includes support of packet services, including short message service in the structure shown in the contents. This makes the document useful for end-to-end GSM network integration as well as fixed-to-mobile interworking.

What terms does SIST-TS ETSI/TS 102 113-1 V1.1.2:2005 define?

• Abstract Test Suite (ATS) - the collection of abstract test cases derived from the test purposes and used as the basis for executable testing.
• Implementation Under Test (IUT) - the network element, subsystem or implementation being tested.
• Point of Control and Observation (PCO) - the reference point where the tester sends stimuli and observes responses.
• Protocol Implementation Conformance Statement (PICS) - the declaration of which protocol features are implemented, used to select applicable tests.
• Protocol Implementation eXtra Information for Testing (PIXIT) - the extra implementation details needed to run the selected tests correctly.
• Network Integration Testing (NIT) - the testing method used here to verify compatibility across interconnected networks.
• Test Suite Structure and Test Purposes (TSS&TP) - the part of the test specification that defines how the suite is grouped and what each test is intended to prove.

Who uses SIST-TS ETSI/TS 102 113-1 V1.1.2:2005?

This ETSI TS is used by test laboratories, network vendors, mobile network operators, and engineers responsible for ISDN-PSTN-GSM interworking. Quality managers and certification teams use it to plan conformance and interoperability testing, while test tool developers use it to build the abstract test suite and naming scheme.

It is especially relevant when a project needs to verify call control, supplementary services, numbering behaviour, bearer mapping, and information transparency across fixed and mobile networks.

Which standards are used with SIST-TS ETSI/TS 102 113-1 V1.1.2:2005?

Standard	What it contributes
ISO/IEC 9646-1, -2, -3	Core conformance testing methodology, abstract test suite specification, and notation framework used for the test design.
ETSI ETR 193	Methodology guidance for Network Integration Testing and the test coordination procedure style.
ETSI EN 300 403-1	ISDN DSS1 basic call control protocol used in many ISDN-side test purposes.
ETSI EN 300 940	GSM Phase 2+ mobile radio interface layer 3, including call control and supplementary-service signalling used in the GSM-side cases.
ETSI TS 100 600	Signalling requirements for interworking between PLMN and ISDN/PSTN.
ETSI TS 100 976	General requirements on interworking between PLMN and ISDN or PSTN.
ETSI TS 100 913	GSM terminal adaptation functions, used in bearer-mapping cases.
ETSI EN 300 951	GSM line identification supplementary services, used in CLIP and related tests.
ETSI TS 100 543, TS 100 544, TS 100 546, TS 100 548	GSM supplementary-service stage 2 specifications for Call Forwarding, Call Waiting/Call Hold, CUG and Call Barring.
ETSI EN 300 286-1	UUS supplementary service specification used for UUS1 test purposes.

What does the SIST-TS ETSI/TS 102 113-1 V1.1.2:2005 document contain?

The document contains the numbering scheme used to name test purposes, the test suite structure for each network pairing, and the detailed test purposes themselves. It also includes the definitions and abbreviations needed to read the test cases, together with the references that anchor the tests to ISDN and GSM service specifications.

The test purposes are written to check signaling behaviour, not to reproduce a user manual. They describe what should happen on setup, alerting, connect, disconnect and release, including the handling of cause values, progress indicators, and service-specific information elements.

The contents show a strong focus on real interworking problems:

• mapping of bearer and teleservice information
• transport of CLIP, CLIR, COLP, COLR and subaddressing data
• supplementary service behaviour such as CFU, CFB, CW, HOLD, CUG and UUS1
• call clearing in busy, unreachable, rejected and incomplete-number cases
• GSM-GSM packet-service coverage in addition to voice-oriented scenarios

SLOVENSKI STANDARD
01-januar-2005
Storitve in protokoli za napredna omrežja (SPAN) – Preskušanje integracije
omrežja med GSM, faza 2+, ISDN in PSTN – 1. del: Zgradba preskušalnega niza in
namen preskušanja (TSS&TP)
Services and Protocols for Advanced Networks (SPAN); Network Integration Testing
between GSM Phase 2+, ISDN and PSTN; Part 1: Test Suite Structure and Test
Purposes (TSS&TP)
Ta slovenski standard je istoveten z: TS 102 113-1 Version 1.1.2
ICS:
33.040.35 Telefonska omrežja Telephone networks
33.070.50 Globalni sistem za mobilno Global System for Mobile
telekomunikacijo (GSM) Communication (GSM)
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

Technical Specification
Services and Protocols for Advanced Networks (SPAN);
Network Integration Testing
between GSM Phase 2+, ISDN and PSTN;
Part 1: Test Suite Structure and Test Purposes (TSS&TP)

2 ETSI TS 102 113-1 V1.1.2 (2002-09)

Reference
RTS/SPAN-130313
Keywords
GSM_Phase2, ISDN, NIT, PSTN, testing,
TSS&TP
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2002.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI TS 102 113-1 V1.1.2 (2002-09)
Contents
Intellectual Property Rights.5
Foreword.5
Introduction .5
1 Scope.6
2 References.6
3 Definitions and abbreviations.12
3.1 Definitions.12
3.2 Definitions related to test purpose descriptions.13
3.3 Abbreviations.15
4 Void.16
5 Numbering Scheme.17
5.1 Examples.18
6 Test Suite Structure (TSS).19
6.1 ISDN-GSM.19
6.1.1 Support of circuit-switched call control services .19
6.2 PSTN-GSM.20
6.2.1 Support of circuit-switched call control services .20
6.3 GSM (Phase 2+) - ISDN .21
6.3.1 Support of circuit-switched call control services .21
6.4 GSM (Phase 2+) - PSTN.23
6.4.1 Support of circuit-switched call control services .23
6.5 GSM - GSM (Phase 2+) .24
6.5.1 Support of circuit-switched call control services .24
6.5.2 Support of packet services .24
7 Test purposes.25
7.1 Test purposes for ISDN to GSM .25
7.1.1 Test purposes for ISDN to GSM, Basic call .25
7.1.1.1 Successful.25
7.1.1.2 Unsuccessful.44
7.1.2 Test purposes for ISDN to GSM Supplementary services.67
7.2 Test purposes for PSTN to GSM.164
7.2.1 Test purposes for PSTN to GSM, Basic call.164
7.2.1.1 Successful.164
7.2.1.2 Unsuccessful.167
7.2.2 Test purposes for PSTN to GSM, Supplementary_services .170
7.3 Test purposes for GSM-ISDN, Basic call .176
7.3.1 Test purposes for GSM-ISDN, Basic call.176
7.3.1.1 Successfull.176
7.3.1.2 Unsuccessfull.202
7.3.2 Test purposes for GSM-ISDN Supplementary services.214
7.4 Test purposes for GSM-PSTN.312
7.4.1 Test purposes for GSM-PSTN, Basic call .312
7.4.1.1 Successful.312
7.4.1.2 Unsuccessful.326
7.4.2 Test purposes for GSM-PSTN, Supplementary Services.332
7.5 Test purposes for GSM-GSM.349
7.5.1 Test purposes for GSM-GSM, Basic call.349
7.5.1.1 Successful.350
7.5.1.2 Unsuccessful .388
7.5.2 Test purposes for GSM-GSM Supplementary services .405
7.5.3 Support of packet services .455
ETSI
4 ETSI TS 102 113-1 V1.1.2 (2002-09)
7.5.3.1 Support of packet services, Short message service .455
7.5.3.1.1 Short message service point to point on CS mode.455
7.5.3.1.2 Short message service point to point on PS mode .461
7.5.3.1.3 Short message service cell broadcast.462
Annex A (informative): Bibliography.464
History .465

ETSI
5 ETSI TS 102 113-1 V1.1.2 (2002-09)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Services and Protocols for
Advanced Networks (SPAN).
The present document was developed by EURESCOM P1106 as Deliverable 2 Volume 1 and made freely and publicly
available to ETSI TC SPAN for publication.
The present document is part 1 of a multi-part deliverable covering the Network Integration Testing between GSM
Phase 2+, ISDN and PSTN, as identified below:
Part 1: "Test Suite Structure and Test Purposes (TSS&TP)";
Part 2: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)".
Introduction
The present document contains the Test Suite Structure and Test Purposes (TSS&TP) for Network Integration Testing
for the European ISDN and PLMN, covering Network Integration Testing (NIT) between ISDN-GSM, PSTN-GSM,
GSM-ISDN, GSM-PSTN and GSM-GSM networks. The objective is to verify the level of international or national
end-to-end support of ISDN and GSM (PLMN) services.
ETSI
6 ETSI TS 102 113-1 V1.1.2 (2002-09)
1 Scope
The present document specifies the Test Suite Structure and Test Purposes (TSS&TP) for Network Integration Testing
(NIT) to verify the overall compatibility of GSM Phase 2+, ISDN and non-ISDN (PSTN) over the national or
international ISUP between networks. Network Integration Testing will assure that the appropriate requested features
passes between an ISDN subscriber and the mobile subscriber across the national or international ISUP (ISUP V2)
interface.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
[1] ETSI EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling
System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;
Part 1: Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".
[2] ETSI ETS 300 083: "Integrated Services Digital Network (ISDN); Circuit mode structured bearer
service category usable for speech information transfer; Terminal requirements for end-to-end
compatibility".
[3] ETSI ETS 300 084: "Integrated Services Digital Network (ISDN); Circuit mode structured bearer
service category usable for 3,1 kHz audio information transfer; Terminal requirements necessary
for end-to-end compatibility".
[4] ETSI EN 300 267-1: "Integrated Services Digital Network (ISDN); Telephony 7 kHz and
videotelephony teleservices; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[5] ETSI ETS 300 080: "Integrated Services Digital Network (ISDN); ISDN lower layer protocols for
telematic terminals ".
[6] ETSI ETS 300 103: "Integrated Services Digital Network (ISDN); Support of
CCITT Recommendation X.21, X.21 bis and X.20 bis based Data Terminal Equipments (DTEs)
by an ISDN Synchronous and asynchronous terminal adaptation functions ".
[7] ETSI EN 300 092-1: "Integrated Services Digital Network (ISDN); Calling Line Identification
Presentation (CLIP) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[8] ETSI EN 300 093-1: "Integrated Services Digital Network (ISDN); Calling Line Identification
Restriction (CLIR) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[9] ETSI EN 300 097-1: "Integrated Services Digital Network (ISDN); Connected Line Identification
Presentation (COLP) supplementary service; Digital Subscriber Signalling System No. one
(DSS1) protocol; Part 1: Protocol specification".
[10] ETSI EN 300 098-1: "Integrated Services Digital Network (ISDN); Connected Line Identification
Restriction (COLR) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
ETSI
7 ETSI TS 102 113-1 V1.1.2 (2002-09)
[11] ETSI EN 300 138-1: "Integrated Services Digital Network (ISDN); Closed User Group (CUG)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[12] ETSI EN 300 061-1: "Integrated Services Digital Network (ISDN); Subaddressing (SUB)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[13] ETSI EN 300 055-1: "Integrated Services Digital Network (ISDN); Terminal Portability (TP)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[14] ETSI EN 300 286-1: "Integrated Services Digital Network (ISDN); User-to-User Signalling
(UUS) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[15] ETSI ETS 300 121 "Integrated Services Digital Network (ISDN); Application of the ISDN User
Part (ISUP) of CCITT Signalling System No.7 for international ISDN interconnections
(ISUP version 1)".
[16] ETSI EN 300 185-1: "Integrated Services Digital Network (ISDN); Conference call, add-on
(CONF) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[17] ETSI EN 300 207-1: "Integrated Services Digital Network (ISDN); Diversion supplementary
services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol
specification".
[18] ETSI EN 300 210-1: "Integrated Services Digital Network (ISDN); Freephone (FPH)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[19] ETSI EN 300 130-1: "Integrated Services Digital Network (ISDN); Malicious Call Identification
(MCID) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[20] ETSI EN 300 188-1: "Integrated Services Digital Network (ISDN); Three-Party (3PTY)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[21] ETSI EN 300 141-1: "Integrated Services Digital Network (ISDN); Call Hold (HOLD)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[22] ETSI EN 300 058-1: "Integrated Services Digital Network (ISDN); Call Waiting (CW)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[23] ETSI EN 300 356-1 "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN
User Part (ISUP) version 2 for the international interface; Part 1: Basic services
[ITU-T Recommendations Q.761 to Q.764 (1993), modified]".
[24] ETSI EN 300 359-1: "Integrated Services Digital Network (ISDN); Completion of Calls to Busy
Subscriber (CCBS) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[25] ETSI EN 300 369-1: "Integrated Services Digital Network (ISDN); Explicit Call Transfer (ECT)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[26] ETSI EN 300 195-1: "Integrated Services Digital Network (ISDN); Supplementary service
interactions; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol
specification".
ETSI
8 ETSI TS 102 113-1 V1.1.2 (2002-09)
[27] ETSI EN 300 196-1: "Integrated Services Digital Network (ISDN); Generic functional protocol for
the support of supplementary services; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[28] ETSI EN 300 289: "Business TeleCommunications (BTC); 64 kbit/s digital unrestricted leased line
with octet integrity (D64U); Connection characteristics".
[29] ETSI TBR 008: "Integrated Services Digital Network (ISDN); Telephony 3,1 kHz teleservice;
Attachment requirements for handset terminals".
[30] ETSI ETR 193: "Methods for Testing and Specification (MTS); Network Integration Testing
(NIT); Methodology aspects; Test Co-ordination Procedure (TCP) style guide".
[31] ITU-T Recommendation G.821 "Error performance of an international digital connection
operating at a bit rate below the primary rate and forming part of an Integrated Services Digital
Network" (White Book draft 1993).
[32] ITU-T Recommendation G.822 (1988): "Controlled slip rate objectives of an international digital
connection".
[33] ITU-T Recommendation O.152 (1988): "Error performance measuring equipment for 64 kbit/s
paths".
[34] ITU-T Recommendation I.112 (1988): "Vocabulary and terms for ISDNs".
[35] ITU-T Recommendation I.210 (1988): "Principles of the telecommunication services supported by
an ISDN and the means to describe them".
[36] ITU-T Recommendation I.411 (1988): "ISDN user-network interfaces - Reference configurations".
[37] ITU-T Recommendation E.164 (1988): "Numbering plan for the ISDN era".
[38] ISO/IEC 9646-1: "Information Technology-OSI Conformance Testing Methodology and
Framework, Part 1: General Concepts".
[39] ISO/IEC 9646-2: "Information Technology-OSI Conformance Testing Methodology and
Framework, Part 2: Abstract Test Suite Specification".
[40] ISO/IEC 9646-3: "Information Technology-OSI Conformance Testing Methodology and
Framework, Part 3: The Tree and Tabular Combined Notation".
[41] ETSI ETR 350: "Digital cellular telecommunications system (Phase 2+) (GSM); Abbreviations
and acronyms (GSM 01.04 version 5.0.1)".
[42] ETSI TS 100 500: "Digital cellular telecommunications system (Phase 2+); Principles of
telecommunication services supported by a GSM Public Land Mobile Network (PLMN)
(GSM 02.01 version 8.2.1 Release 1999)".
[43] ETSI EN 300 904: "Digital cellular telecommunications system (Phase 2+) (GSM); Bearer
Services (BS) supported by a GSM Public Land Mobile Network (PLMN)
(GSM 02.02 version 7.0.2 Release 1998)".
[44] ETSI TS 100 905: "Digital cellular telecommunications system (Phase 2+) (GSM); Teleservices
supported by a GSM Public Land Mobile Network (PLMN) (GSM 02.03 version 7.0.0
Release 1998)".
[45] ETSI EN 300 918: "Digital cellular telecommunications system (Phase 2+) (GSM); General on
supplementary services (GSM 02.04 version 7.1.2 Release 1998)".
[46] ETSI TS 100 907: "Digital cellular telecommunications system (Phase 2+); Man-machine
Interface (MMI) of the Mobile Station (MS) (3GPP TS 02.30 version 7.1.1 Release 1998)".
[47] ETSI TS 100 514: "Digital cellular telecommunications system (Phase 2+) (GSM);
Line identification Supplementary Services - Stage 1 (GSM 02.81 version 7.0.0 Release 1998)".
ETSI
9 ETSI TS 102 113-1 V1.1.2 (2002-09)
[48] ETSI TS 100 515: "Digital cellular telecommunications system (Phase 2+) (GSM);
Call Forwarding (CF) Supplementary Services - Stage 1 (GSM 02.82 version 7.0.1 Release
1998)".
[49] ETSI TS 100 516: "Digital cellular telecommunications system (Phase 2+) (GSM); Call Waiting
(CW) and Call Holding (HOLD); Supplementary Services - Stage 1 (GSM 02.83 version 7.0.0
Release 1998)".
[50] ETSI TS 100 518: "Digital cellular telecommunications system (Phase 2+) (GSM); Closed User
Group (CUG) Supplementary Services - Stage 1 (GSM 02.85 version 7.0.0 Release 1998)".
[51] ETSI TS 100 520: "Digital cellular telecommunications system (Phase 2+) (GSM); Call Barring
(CB) Supplementary Services - Stage 1 (GSM 02.88 version 7.0.0 Release 1998)".
[52] ETSI TS 100 927: "Digital cellular telecommunications system (Phase 2+); Numbering,
Addressing and Identification (3GPP TS 03.03 version 7.7.0 Release 1998)".
[53] ETSI TS 100 524: "Digital cellular telecommunications system (Phase 2+) (GSM); Signalling
requirements relating to routeing of calls to mobile subscribers (GSM 03.04 version 6.0.0 Release
1997)".
[54] ETSI EN 300 928: "Digital cellular telecommunications system (Phase 2+) (GSM); Technical
realization of Supplementary Services (GSM 03.11 version 7.0.1 Release 1998)".
[55] ETSI TS 100 543: "Digital cellular telecommunications system (Phase 2+) (GSM); Call
Forwarding (CF) supplementary services; Stage 2 (GSM 03.82 version 7.0.0 Release 1998)".
[56] ETSI TS 100 544: "Digital cellular telecommunications system (Phase 2+) (GSM); Call Waiting
(CW) and Call Hold (HOLD) supplementary services; Stage 2 (GSM 03.83 version 7.0.0
Release 1998)".
[57] ETSI TS 100 546: "Digital cellular telecommunications system (Phase 2+) (GSM); Closed User
Group (CUG) supplementary services - Stage 2; (GSM 03.85 version 7.0.0 Release 1998)".
[58] ETSI TS 100 548: "Digital cellular telecommunications system (Phase 2+) (GSM); Call Barring
(CB) supplementary services - Stage 2 (GSM 03.88 version 7.0.0 Release 1998)".
[59] ETSI EN 300 940: "Digital cellular telecommunications system (Phase 2+) (GSM); Mobile radio
interface layer 3 specification (GSM 04.08 version 7.7.1 Release 1998)".
[60] ETSI TS 100 941: "Digital cellular telecommunications system (Phase 2+); Mobile radio interface
layer 3; Supplementary services specification; General aspects (3GPP TS 04.10 version 7.1.0
Release 1998)".
[61] ETSI ETS 300 950: "Digital cellular telecommunications system (Phase 2+) (GSM); Mobile radio
interface layer 3 supplementary services specification; Formats and coding (GSM 04.80
version 5.3.1 Release 1996)".
[62] ETSI EN 300 951: "Digital cellular telecommunications system (Phase 2+) (GSM); Line
identification supplementary services; Stage 3 (GSM 04.81 version 7.0.1 Release 1998)".
[63] ETSI EN 300 952: "Digital cellular telecommunications system (Phase 2+) (GSM); Call
Forwarding (CF) supplementary services; Stage 3 (GSM 04.82 version 7.0.2 Release 1998)".
[64] ETSI EN 300 953: "Digital cellular telecommunications system (Phase 2+) (GSM); Call Waiting
(CW) and Call Hold (HOLD) supplementary services; Stage 3 (GSM 04.83 version 7.0.1
Release 1998)".
[65] ETSI TS 100 569: "Digital cellular telecommunications system (Phase 2+) (GSM); Closed User
Group (CUG) supplementary services; Stage 3 (GSM 04.85 version 7.0.0 Release 1998)".
[66] ETSI TS 100 956: "Digital cellular telecommunications system (Phase 2+) (GSM); Call Barring
(CB) supplementary services; Stage 3 (GSM 04.88 version 7.0.0 Release 1998)".
ETSI
10 ETSI TS 102 113-1 V1.1.2 (2002-09)
[67] ETSI TS 100 913: "Digital cellular telecommunications system (Phase 2+) (GSM); General on
Terminal Adaptation Functions (TAF) for Mobile Stations (MS) (GSM 07.01 version 7.1.1
Release 1998)".
[68] ETSI TS 101 642: "Digital cellular telecommunications system (Phase 2+); Base Station
System - Mobile Services Switching Centre (BSS-MSC) Interface - Interface Principles
(3GPP TS 08.02 version 8.0.1 Release 1999)".
[69] ETSI TS 100 589: "Digital cellular telecommunications system (Phase 2+); Signalling Transport
Mechanism Specification for the Base Station System - Mobile Services Switching Centre
(BSS-MSC) Interface (3GPP TS 08.06 version 8.0.1 Release 1999)".
[70] ETSI TS 100 590: "Digital cellular telecommunications system (Phase 2+); Mobile-services
Switching Centre - Base Station System (MSC - BSS) interface; Layer 3 specification
(3GPP TS 08.08 version 8.9.0 Release 1999)".
[71] ETSI TR 101 643: "Digital cellular telecommunications system (Phase 2+) (GSM); General
network interworking scenarios (GSM 09.01 version 8.0.0 Release 1999)".
[72] ETSI TS 100 974: "Digital cellular telecommunications system (Phase 2+); Mobile Application
Part (MAP) Specification (3GPP TS 09.02 version 7.9.0 Release 1998)".
[73] ETSI TS 100 600: "Digital cellular telecommunications system (Phase 2+) (GSM); Signalling
requirements on interworking between the Integrated Services Digital Network (ISDN) or Public
Switched Telephone Network (PSTN) and the Public Land Mobile Network (PLMN)
(GSM 09.03 version 7.0.0 Release 1998)".
[74] ETSI TS 100 976: "Digital cellular telecommunications system (Phase 2+) (GSM); General
requirements on interworking between the Public Land Mobile Network (PLMN) and the
Integrated Services Digital Network (ISDN) or Public Switched Telephone Network (PSTN)
(GSM 09.07 version 7.2.0 Release 1998)".
[75] ETSI ETS 300 605: "Digital cellular telecommunications system (Phase 2) (GSM); Information
element mapping between Mobile Station - Base Station System (MS - BSS) and Base Station
System - Mobile-services Switching Centre (BSS - MSC) signalling procedures and the Mobile
Application Part (MAP) (GSM 09.10 version 4.4.1)".
[76] ETSI ETS 300 606: "Digital cellular telecommunications system (Phase 2) (GSM); Signalling
interworking for supplementary services (GSM 09.11)".
[77] ETSI ETR 060: "Signalling Protocols and Switching (SPS); Guidelines for using Abstract Syntax
Notation One (ASN.1) in telecommunication application protocols ".
[78] ITU-T Recommendation Q.699: "Interworking between the digital Subscriber Signalling System
Layer 3 protocol and the Signalling System No.7 ISDN User part".
[79] ITU-T Recommendation Q.761 (1993): "Specifications of Signalling System No.7; Functional
description of the ISDN user part of Signalling System No.7".
[80] ITU-T Recommendation Q.762 (1993): "Specifications of Signalling System No.7; General
function of messages and signals".
[81] ITU-T Recommendation Q.763 (1993): "Specifications of Signalling System No.7; Formats and
codes".
[82] ITU-T Recommendation Q.764 (1993): "Specifications of Signalling System No.7; Signalling
procedures".
[83] ETSI EG 201 018: "Integrated Services Digital Network (ISDN); Application of the Bearer
Capability (BC), High Layer Compatibility (HLC) and Low Layer Compatibility (LLC)
information elements by terminals supporting ISDN services".
[84] ETSI TS 123 002 (v3.2.0): "Digital cellular telecommunications system (Phase 2+); Universal
Mobile Telecommunications System (UMTS); Network Architecture (3GPP TS 23.002
version 5.7.0 Release 5)".
ETSI
11 ETSI TS 102 113-1 V1.1.2 (2002-09)
[85] ETSI TS 122 034 (v3.1.0): "Digital cellular telecommunications system (Phase 2+); Universal
Mobile Telecommunications System (UMTS); High Speed Circuit Switched Data (HSCSD);
Stage 1 (3GPP TS 22.034 version 5.0.0 Release 5)".
[86] ETSI TS 122 060 (v3.2.0): "Digital cellular telecommunications system (Phase 2+); Universal
Mobile Telecommunications System (UMTS); General Packet Radio Service (GPRS);
Service description; Stage 1 (3GPP TS 22.060 version 5.2.0 Release 5)".
[87] ETSI EN 300 899-1: "Integrated Services Digital Network (ISDN); Signalling System No.7;
Interworking between ISDN User Part (ISUP) version 2 and Digital Subscriber Signalling System
No. one (DSS1); Part 1: Protocol specification [ITU-T Recommendation Q.699, modified]".
[88] ETSI TS 101 038: "Digital cellular telecommunications system (Phase 2+) (GSM); High Speed
Circuit Switched Data (HSCSD) - Stage 2 (GSM 03.34 version 7.0.0 Release 1998)".
[89] ETSI ETS 300 511: "European digital cellular telecommunications system (Phase 2);
Man-Machine Interface (MMI) of the Mobile Station (MS) (GSM 02.30)".
[90] ETSI ETR 018: "Integrated Services Digital Network (ISDN); Application of the Bearer
Capability (BC), High Layer Compatibility (HLC) and Low Layer Compatibility (LLC)
information elements by terminals supporting ISDN services".
[91] ETSI TS 100 542: "Digital cellular telecommunications system (Phase 2+) (GSM); Line
identification supplementary services; Stage 2 (GSM 03.81 version 7.0.1 Release 1998)".
[92] ETSI EN 300 092-1/A2: "Integrated Services Digital Network (ISDN); Calling Line Identification
Presentation (CLIP) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[93] ETSI ETS 300 577: "Digital cellular telecommunications system (Phase 2) (GSM); Radio
transmission and reception (GSM 05.05 version 4.23.1)".
[94] ETSI EN 302 646-1: "Integrated Services Digital Network (ISDN); Signalling System No.7;
Digital cellular telecommunications system (Phase 2+); Application of ISDN User Part (ISUP)
version 3 for the ISDN-Public Land Mobile Network (PLMN) signalling interface;
Part 1: Protocol specification (GSM 09.14 version 7.0.2 Release 1998)".
[95] ETSI EN 300 356-15: "Integrated Services Digital Network (ISDN); Signalling System No.7
(SS7); ISDN User Part (ISUP) version 4 for the international interface; Part 15: Diversion
supplementary service [ITU-T Recommendation Q.732, clauses 2 to 5 (1999) modified]".
[96] ETSI EN 300 646-1: "Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7);
Digital cellular telecommunications system (Phase 2); Application of ISDN User Part (ISUP)
version 2 for the ISDN-Public Land Mobile Network (PLMN) signalling interface;
Part 1: Protocol specification (GSM 09.12 version 4.2.2)".
[97] ETSI TS 124 087: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); User-to-User Signalling (UUS); Stage 3 (3GPP TS 24.087
version 5.0.0 Release 5)".
[98] ETSI TS 123 087: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); User-to-User Signalling (UUS) supplementary service;
Stage 2 (3GPP TS 23.087 version 5.0.0 Release 5)".
[99] ITU-T Recommendation Q.734.1: "Stage 3 description for multiparty supplementary services
using Signalling System No. 7: Conference calling".
[100] ITU-T Recommendation Q.734.2: "Stage 3 description for multiparty supplementary services
using Signalling System No. 7 : Three-party service".
[101] ETSI EN 300 065-1: "ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM);
Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational
information (NAVTEX); Part 1: Technical characteristics and methods of measurement".
ETSI
12 ETSI TS 102 113-1 V1.1.2 (2002-09)
[102] ETSI EN 300 001: "Attachments to the Public Switched Telephone Network (PSTN); General
technical requirements for equipment connected to an analogue subscriber interface in the PSTN".
[103] ETSI ETS 300 604: "Digital cellular telecommunications system (Phase 2) (GSM); General
requirements on interworking between the Public Land Mobile Network (PLMN) and the
Integrated Services Digital Network (ISDN) or Public Switched Telephone Network (PSTN)
(GSM 09.07 version 4.13.1)".
[104] ISO/IEC 7776: "Information technology; Telecommunications and information exchange between
systems; High-level data link control procedures; Description of the X.25 LAPB-compatible DTE
data link procedures".
[105] ISO/IEC 8208: "Information technology; Data communications; X.25 Packet Layer Protocol for
Data Terminal Equipment".
[106] ITU-T Recommendation E.163: "Numbering plan for the international telephone service".
[107] ETSI ETS 300 519: "Digital cellular telecommunications system (Phase 2) (GSM); Advice of
Charge (AoC) supplementary services; Stage 1 (GSM 02.86)".
[108] ETSI TS 100 517: "Digital cellular telecommunications system (Phase 2+) (GSM); MultiParty
(MPTY) Supplementary Services; Stage 1 (GSM 02.84 version 7.0.0 Release 1998)".
[109] ETSI TS 100 545: "Digital cellular telecommunications system (Phase 2+) (GSM); Multi Party
(MPTY) supplementary services; Stage 2 (GSM 03.84 version 7.0.0 Release 1998)".
[110] ETSI ETS 300 649: "Public Switched Telephone Network (PSTN); Calling Line Identification
Restriction (CLIR) supplementary service; Service description".
[111] ITU-T Recommendation Q.735.1: "Stage 3 description for community of interest supplementary
services using Signalling System No. 7 : Closed user group (CUG)".
[112] ETSI ETS 300 566: "Digital cellular telecommunications system (Phase 2) (GSM);
Call Forwarding (CF) supplementary services; Stage 3 (GSM 04.82)".
[113] ETSI ETS 300 557: "Digital cellular telecommunications system (Phase 2) (GSM); Mobile radio
interface; Layer 3 specification (GSM 04.08 version 4.23.1)".
[114] ETSI TS 124 093: "Digital cellular telecommunications system (Phase 2+) (GSM); Universal
Mobile Telecommunications System (UMTS); Completion of calls to Busy Subscriber (CCBS) -
Stage 3 (3G TS 24.093 version 3.0.0 Release 1999)".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ISO/IEC 9646-1 [38] and the following
apply:
Abstract Test Case (ATC): Refer to ISO/IEC 9646-1 [38].
Abstract Test Suite (ATS): Refer to ISO/IEC 9646-1 [38].
Implementation Conformance Statement (ICS) proforma: Refer to ISO/IEC 9646-1 [38].
Implementation eXtra Information for Testing (IXIT) proforma: Refer to ISO/IEC 9646-1 [38].
Implementation Under Test (IUT): Refer to ISO/IEC 9646-1 [38].
Lower Tester: Refer to ISO/IEC 9646-1 [38].
Point of Control and Observation (PCO): Refer to ISO/IEC 9646-1 [38].
ETSI
13 ETSI TS 102 113-1 V1.1.2 (2002-09)
Protocol Implementation Conformance Statement (PICS): Refer to ISO/IEC 9646-1 [38].
Protocol Implementation eXtra Information for Testing (PIXIT): Refer to ISO/IEC 9646-1 [38].
System Under Test (SUT): Refer to ISO/IEC 9646-1 [38].
Test Purpose (TP): Refer to ISO/IEC 9646-1 [38].
3.2 Definitions related to test purpose descriptions
BC=3,1 kHz audio: bearer capability information element with its information transfer capability field set to "3,1 kHz
Audio" and its user information layer one protocol field set to "G.711 A-law"
NOTE: See ETS 300 084 [3].
BC=speech: bearer capability information element with its information transfer capability field set to "speech" and its
user information layer one protocol field set to "G.711 A-law"
NOTE: See ETS 300 083 [2].
BC=UDI: bearer capability information element with its information transfer capability set to "unrestricted digital
information"
NOTE: See EN 300 403-1 [1].
BC=UDI/TA: bearer capability information element with its information transfer capability set to "unrestricted digital
information with tones/announcements" and its user information layer one protocol field set to
"ITU-T Recommendations H.221 and H.242"
NOTE: See EN 300 267-1 [4].
BC=V110/X30: bearer capability information element with its information transfer capability set to "unrestricted digital
information" and its user information layer 1 field set to "ITU standardized rate adaption V.110/X.30", including
sync/async and user rate values
NOTE: See EN 300 403-1 [1].
CF active: call forwarding (U, B or NR) supplementary service already activated with the address of user C
NOTE: See EN 300 207-1 [17].
CUG default request: the calling user does not include in the outgoing SETUP message an explicit request for the
CUG supplementary service
NOTE: See EN 300 138-1 [11].
GSM - Bearer service categories: all bearer service categories provide information transfer between R/S reference
points and allow the use of sub-rate information streams which are rate adapted
GSM-BC=UD: Unrestricted Digital information (UD) which provides the transfer of unrestricted digital information
GSM-BC=3,1 kHz: (external to the PLMN) service used to select a "3,1 kHz audio" interworking function at the MSC
NOTE: This service category is used when interworking with the ISDN or PSTN "3,1 kHz audio" service and
includes the capability to select a modem at the interworking function. "External to the PLMN" indicates
that the "3,1 kHz audio" service is only used outside of the PLMN, in the ISDN/PSTN. The connection
within the PLMN, user access point to the interworking function, is an unrestricted digital connection.
Alternate Speech/Data: service which provides the capability to swap between speech and data during a call
NOTE 1: If either the speech or data portion of the call requires a full rate channel, a full rate channel shall be used
for the duration of the call.
NOTE 2: The access interface at the mobile station for the data portion is assumed to be a standard data interface.
Some means must be provided to select the speech/data capability.
ETSI
14 ETSI TS 102 113-1 V1.1.2 (2002-09)
Speech followed by Data: service which provides a speech connection first and then at some time while the call is in
progress, the user can switch to a data connection
NOTE: The user cannot switch back to speech after the data portion. If either the speech or data portion of the call
requires a full rate channel, a full rate channel shall be used from the start of the call. The network may
then change to a half rate channel for the data portion.
GSM teleservices: teleservices supported by a GSM PLMN described by a number of attributes which are intended to
be largely independent
NOTE: They are grouped into three categories:
- high layer attributes;
- low layer attributes (describing the Bearer capabilities which support the Teleservice);
- information transfer attributes;
- access attributes;
- general attributes.
GSM-BC=Speech (TS 11): service which provides the transmission of speech information and audible signalling tones
of the PSTN/ISDN
NOTE: In the GSM PLMN and the fixed network processing technique appropriate for speech such as analogue
transmission, echo cancellation and low bit rate voice encoding may be used.
Alternate speech and facsimile group 3 (TS 61): teleservice which allows the connection of ITUgroup 3 fax apparatus
(send and/or receive) to the mobile stations of a GSM PLMN
NOTE: Facsimile connections may be established to/from group 3 apparatus in the PSTN, ISDN or GSM PLMN.
Automatic Facs. group 3 (TS 62): teleservice which allows connection of ITUgroup 3 fax apparatus to and from the
mobile stations of a GSM PLMN
NOTE: Facsimile connections may be established to and from group 3 apparatus in the PSTN, ISDN or GSM
PLMN.
HLC=telephony: High Layer compatibility information element with its high layer characteristics identification field
set to "telephony"
NOTE: See EN 300 289 [28].
HLC=videotelephony_ic: High Layer compatibility information element with its high layer characteristics
identification field set to "videotelephony (Rec. F.721)" and its extended audiovisual characteristics field set to
"capability set of initial channel of Rec. H.221"
NOTE: See EN 300 267-1 [4].
HLC=facsimile G2/G3: High Layer compatibility information element with its high layer characteristics identification
field set to "facsimile group 2/3 (Rec. F.182)"
NOTE: See EN 300 403-1 [1].
HLC=facsimile group 4: High Layer compatibility information element with its high layer character
...