SIST-TS ETSI/TS 102 110-2 V1.1.1:2005

Services and Protocols for Advanced Networks (SPAN); Network integration testing of Universal Mobile Telecommunications System (UMTS) with Global System for Mobile Communication (GSM) Phase 2+, Public Switched Telephone Network (PSTN) and Integrated Services Digital Network (ISDN) Part 2: Abstract Test Suite (ATS) and Partial Implementation eXtra Information for Testing (PIXIT) proforma

Specifies the ATS & PIXIT

Storitve in protokoli za napredna omrežja (SPAN) – Preskušanje integracije omrežja univerzalnega mobilnega telekomunikacijskega sistema (UMTS) z globalnim sistemom mobilnih komunikacij (GSM), faza 2+, ter javnega komutiranega telefonskega omrežja (PSTN) z digitalnim omrežjem z integriranimi storitvami (ISDN) – 2. del: Abstraktni preskušalni niz (ATS) in delna dodatna informacija za preskušanje izvedbe protokola (PIXIT) – Proforma

General Information

• Status: Published
• Publication Date: 31-Dec-2004
• ICS: 33.040.35 - Telephone networks
• ICS: 33.070.50 - Global System for Mobile Communication (GSM)
• ICS: 33.080 - Integrated Services Digital Network (ISDN)
• Technical Committee: SPN - Services and Protocols for Networks
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-2005
• Due Date: 01-Jan-2005
• Completion Date: 01-Jan-2005
• Ref Project: ETSI TS 102 110-2 V1.1.1 (2003-03) - Services and Protocols for Advanced Networks (SPAN); Network integration testing of Universal Mobile Telecommunications System (UMTS) with Global System for Mobile Communication (GSM) Phase 2+, Public Switched Telephone Network (PSTN) and Integrated Services Digital Network (ISDN) Part 2: Abstract Test Suite (ATS) and Partial Implementation eXtra Information for Testing (PIXIT) proforma

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2005
Storitve in protokoli za napredna omrežja (SPAN) – Preskušanje integracije
omrežja univerzalnega mobilnega telekomunikacijskega sistema (UMTS) z
globalnim sistemom mobilnih komunikacij (GSM), faza 2+, ter javnega
komutiranega telefonskega omrežja (PSTN) z digitalnim omrežjem z integriranimi
storitvami (ISDN) – 2. del: Abstraktni preskušalni niz (ATS) in delna dodatna
informacija za preskušanje izvedbe protokola (PIXIT) – Proforma
Services and Protocols for Advanced Networks (SPAN); Network integration testing of
Universal Mobile Telecommunications System (UMTS) with Global System for Mobile
Communication (GSM) Phase 2+, Public Switched Telephone Network (PSTN) and
Integrated Services Digital Network (ISDN) Part 2: Abstract Test Suite (ATS) and Partial
Implementation eXtra Information for Testing (PIXIT) proforma
Ta slovenski standard je istoveten z: TS 102 110-2 Version 1.1.1
ICS:
33.040.35 Telefonska omrežja Telephone networks
33.070.50 Globalni sistem za mobilno Global System for Mobile
telekomunikacijo (GSM) Communication (GSM)
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

Technical Specification
Services and Protocols for Advanced Networks (SPAN);
Network integration testing of
Universal Mobile Telecommunications System (UMTS)
with Global System for Mobile Communication (GSM)
Phase 2+, Public Switched Telephone Network (PSTN)
and Integrated Services Digital Network (ISDN);
Part 2: Abstract Test Suite (ATS) and Partial
Implementation eXtra Information for Testing (PIXIT) proforma

�
2 ETSI TS 102 110-2 V1.1.1 (2003-03)

Reference
DTS/SPAN-130305-2
Keywords
ISDN, NIT, PSTN, testing, TSS&TP, UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2003.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI TS 102 110-2 V1.1.1 (2003-03)
Contents
Intellectual Property Rights.5
Foreword.5
Introduction .5
1 Scope.6
2 References.6
3 Definitions and abbreviations.9
3.1 Definitions.9
3.2 Definitions related to test purpose descriptions.9
3.3 Abbreviations.12
4 Conformance to this ICS and IXIT proformas specification.13
Annex A (normative): End-to-end ICS proforma.14
A.1 Guidance for completing the ICS proforma .14
A.1.1 Purposes and structure.14
A.1.2 Abbreviations and conventions .14
A.1.3 Instructions for completing the ICS proforma.16
A.2 Identification of the implementation .16
A.2.1 Date of the statement.16
A.2.2 Implementation Under Test (IUT) identification .16
A.2.3 ICS contact person.17
A.3 Identification of the document .17
A.4 ISDN - UMTS Interworking .17
A.4.1 Basic call.17
A.4.2 Supplementary services.20
A.4.2.1 Non-symmetrical tests.26
A.5 Interworking PSTN-UMTS.26
A.5.1 Basic call.26
A.5.2 Interworking PSTN-UMTS -Supplementary services.26
A.5.2.1 Non-symmetrical tests.28
A.6 UMTS-ISDN Interworking.29
A.6.1 Basic call.29
A.6.2 UMTS-ISDN Interworking - Supplementary services .32
A.6.2.1 Non-symmetrical tests.35
A.7 UMTS-PSTN Interworking.36
A.7.1 Basic call .36
A.7.2 UMTS-PSTN Interworking - Supplementary services.36
A.7.2.1 Non-symmetrical tests.38
A.8 GSM-UMTS Interworking.38
A.8.1 Basic call.38
A.8.2 GSM-UMTS Interworking - Supplementary services.41
A.9 UMTS-GSM Interworking.47
A.9.1 Basic call.47
A.9.2 UMTS-GSM Interworking - Supplementary services.50
A.10 UMTS-UMTS Interworking.56
A.10.1 Basic call.56
A.10.2 UMTS-UMTS Interworking - Supplementary services.59
ETSI
4 ETSI TS 102 110-2 V1.1.1 (2003-03)
Annex B (normative): Partial End-to-end PIXIT proforma.66
B.1 Instructions for completing the PIXIT proforma.66
B.2 Identification summary.66
B.3 Abstract test suite summary .66
B.4 Test campaign report.73
Annex C (normative): Abstract Test Suite (ATS) .98
C.1 The TTCN Graphical form (TTCN.GR) .98
C.2 The TTCN Machine Processable form (TTCN.MP).98
Annex D (informative): Bibliography.99
History .105

ETSI
5 ETSI TS 102 110-2 V1.1.1 (2003-03)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
All published ETSI deliverables shall include information which directs the reader to the above source of information.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Services and Protocols for
Advanced Networks (SPAN).
The present document was developed by EURESCOM P1106 as Deliverable 3 Volume 2 Parts 1 and 2, and made freely
and publicly available to ETSI TC SPAN for publication.
The present document is part 2 of a multi-part deliverable covering Network integration testing of Universal Mobile
Telecommunications System (UMTS) with Global System for Mobile Communication (GSM) Phase 2+, Public
Switched Telephone Network (PSTN) and Integrated Services Digital Network (ISDN), as identified below:
Part 1: "Test Suite Structure and Test Purposes (TSS&TP)";
Part 2: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing
(PIXIT) proforma".
Introduction
The present document contains the Implementation Conformance Statement (ICS) and Implementation eXtra
Information for Testing (IXIT) for Network Integration Testing for the European ISDN and PLMN, covering Network
Integration Testing (NIT) between ISDN-UMTS, PSTN-UMTS, UMTS-ISDN, UMTS-PSTN and UMTS-UMTS
networks. The objective is to verify the level of international or national end-to-end support of ISDN and UMTS
services. Both bearer services (and associated teleservices) and supplementary services are checked for interworking
capability and compatibility, in the European ISDN and UMTS.
The European ISDN, PSTN and PLMN (GSM, UMTS) are made up by connecting the different national networks and
End-to-end NIT covers all the testing activities necessary to assess the correct behaviour of the interconnected network
from the point of view of access interfaces, network side.
ETSI
6 ETSI TS 102 110-2 V1.1.1 (2003-03)
1 Scope
The present document specifies the Implementation Conformance Statement (ICS) and Implementation eXtra
Information for Testing (IXIT) for Network Integration Testing for Network Integration Testing (NIT) to verify the
overall compatibility of UMTS, GSM, ISDN and non-ISDN (PSTN) over the national or international ISUP between
networks. Network Integration Testing will assure that the appropriate requested features passes between an ISDN
subscriber and the mobile subscriber across the national or international ISUP (ISUP V2) interface.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
[1] ETSI EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling
System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;
Part 1: Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".
[2] ETSI ETS 300 083: "Integrated Services Digital Network (ISDN); Circuit mode structured bearer
service category usable for speech information transfer; Terminal requirements for end-to-end
compatibility".
[3] ETSI ETS 300 084: "Integrated Services Digital Network (ISDN); Circuit mode structured bearer
service category usable for 3,1 kHz audio information transfer; Terminal requirements necessary
for end-to-end compatibility".
[4] ETSI EN 300 267-1: "Integrated Services Digital Network (ISDN); Telephony 7 kHz,
videotelephony, audiographic conference and videoconference teleservices; Digital Subscriber
Signalling System No. one (DSS1) protocol; Part 1: Protocol specification".
[5] ETSI ETS 300 080: "Integrated Services Digital Network (ISDN); ISDN lower layer protocols for
telematic terminals".
[6] ETSI ETS 300 103: "Integrated Services Digital Network (ISDN); Support of CCITT
Recommendation X.21, X.21 bis and X.20 bis based Data Terminal Equipments (DTEs) by an
ISDN Synchronous and asynchronous terminal adaptation functions".
[7] ETSI EN 300 092-1: "Integrated Services Digital Network (ISDN); Calling Line Identification
Presentation (CLIP) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[8] ETSI EN 300 093-1: "Integrated Services Digital Network (ISDN); Calling Line Identification
Restriction (CLIR) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[9] ETSI EN 300 097-1: "Integrated Services Digital Network (ISDN); Connected Line Identification
Presentation (COLP) supplementary service; Digital Subscriber Signalling System No. one
(DSS1) protocol; Part 1: Protocol specification".
[10] ETSI EN 300 098-1: "Integrated Services Digital Network (ISDN); Connected Line Identification
Restriction (COLR) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
ETSI
7 ETSI TS 102 110-2 V1.1.1 (2003-03)
[11] ETSI EN 300 138-1: "Integrated Services Digital Network (ISDN); Closed User Group (CUG)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[12] ETSI EN 300 055-1: "Integrated Services Digital Network (ISDN); Terminal Portability (TP)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[13] ETSI EN 300 286-1: "Integrated Services Digital Network (ISDN); User-to-User Signalling
(UUS) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[14] ETSI EN 300 207-1: "Integrated Services Digital Network (ISDN); Diversion supplementary
services; Digital Subscriber Signalling System No. One (DSS1); Part 1: Protocol specification".
[15] ETSI EN 300 141-1: "Integrated Services Digital Network (ISDN); Call Hold (HOLD)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[16] ETSI EN 300 058-1: "Integrated Services Digital Network (ISDN); Call Waiting (CW)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[17] ETSI EN 300 369-1: "Integrated Services Digital Network (ISDN); Explicit Call Transfer (ECT)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[18] ETSI EN 300 196-1: "Integrated Services Digital Network (ISDN); Generic functional protocol for
the support of supplementary services; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[19] ETSI EN 300 289: "Access and Terminals (AT); 64 kbit/s digital unrestricted leased line with
octet integrity (D64U); Connection characteristics".
[20] ISO/IEC 9646-1: "Information technology; Open Systems Interconnection; Conformance testing
methodology and framework; Part 1: General concepts".
[21] ISO/IEC 9646-2: "Information technology; Open Systems Interconnection; Conformance testing
methodology and framework; Part 2: Abstract Test Suite specification".
[22] ISO/IEC 9646-3: "Information technology; Open Systems Interconnection; Conformance testing
methodology and framework; Part 3: The Tree and Tabular Combined Notation (TTCN)".
[23] ETSI EN 300 940: "Digital cellular telecommunications system (Phase 2+) (GSM); Mobile radio
interface layer 3 specification (GSM 04.08 Release 1998)".
[24] ETSI EN 300 951: "Digital cellular telecommunications system (Phase 2+) (GSM); Line
identification supplementary services; Stage 3 (GSM 04.81 Release 1998)".
[25] ETSI EN 300 952: "Digital cellular telecommunications system (Phase 2+) (GSM); Call
Forwarding (CF) supplementary services; Stage 3 (GSM 04.82 Release 1998)".
[26] ETSI EN 300 953: "Digital cellular telecommunications system (Phase 2+) (GSM); Call Waiting
(CW) and Call Hold (HOLD) supplementary services; Stage 3 (GSM 04.83 Release 1998)".
[27] ETSI TS 100 569: "Digital cellular telecommunications system (Phase 2+) (GSM); Closed User
Group (CUG) supplementary services; Stage 3 (GSM 04.85 Release 1998)".
[28] ETSI TS 100 956: "Digital cellular telecommunications system (Phase 2+) (GSM); Call Barring
(CB) supplementary services; Stage 3 (GSM 04.88 Release 1998)".
[29] ETSI TS 124 008 (V3.2.1): "Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS); Mobile radio interface layer 3
specification, Core Network protocols - Stage 3 (3G TS 24.008 version 3.2.1 Release 1999)".
ETSI
8 ETSI TS 102 110-2 V1.1.1 (2003-03)
[30] ETSI TS 124 011 (V3.1.0): "Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS); Point-to-Point (PP) Short Message
Service (SMS) support on mobile radio interface (3G TS 24.011 version 3.1.0 Release 1999)".
[31] ETSI TS 124 081 (V3.0.0): "Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS); Line identification supplementary
services - Stage 3 (3G TS 24.081 version 3.0.0 Release 1999)".
[32] ETSI TS 124 082 (V3.0.0): "Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS); Call Forwarding (CF) supplementary
services - Stage 3 (3G TS 24.082 version 3.0.0 Release 1999)".
[33] ETSI TS 124 083 (V3.0.0): "Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS); Call Waiting (CW) and Call Hold
(HOLD) supplementary services - Stage 3 (3G TS 24.083 version 3.0.0 Release 1999)".
[34] ETSI TS 124 084 (V3.0.0): "Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS); Multi Party (MPTY) supplementary
service - Stage 3 (3G TS 24.084 version 3.0.0 Release 1999)".
[35] ETSI TS 124 085 (V3.0.0): "Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS); Closed User Group (CUG)
supplementary service - Stage 3 (3G TS 24.085 version 3.0.0 Release 1999)".
[36] ETSI TS 124 087 (V3.0.0): "Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS); User-to-User Signalling (UUS)
Supplementary Service - Stage 3 (3G TS 24.087 version 3.0.0 Release 1999)".
[37] ETSI TS 124 088 (V3.0.0): "Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS); Call Barring (CB) Supplementary
Service - Stage 3 (3G TS 24.088 version 3.0.0 Release 1999)".
[38] ETSI EN 300 001: "Attachments to the Public Switched Telephone Network (PSTN); General
technical requirements for equipment connected to an analogue subscriber interface in the PSTN".
[39] ETSI ETS 300 648: "Public Switched Telephone Network (PSTN); Calling Line Identification
Presentation (CLIP) supplementary service; Service description".
[40] ETSI ETS 300 559: "Digital cellular telecommunications system (Phase 2) (GSM); Point-to-Point
(PP) Short Message Service (SMS) support on mobile radio interface (GSM 04.11)".
[41] ETSI EN 300 954: "Digital cellular telecommunications system (Phase 2+) (GSM); Multi Party
(MPTY) supplementary services; Stage 3 (GSM 04.84 Release 1998)".
[42] ISO/IEC 9646-7: "Information technology; Open Systems Interconnection; Conformance testing
methodology and framework; Part 7: Implementation Conformance Statements".
[43] ITU-T Recommendation G.711: "Pulse code modulation (PCM) of voice frequencies".
[44] ITU-T Recommendation H.221: "Frame structure for a 64 to 1920 kbit/s channel in audiovisual
teleservices".
[45] ITU-T Recommendation H.242: "System for establishing communication between audiovisual
terminals using digital channels up to 2 Mbit/s".
[46] ITU-T Recommendation V.110: "Support by an ISDN of data terminal equipments with V-Series
type interfaces".
[47] ITU-T Recommendation X.30: "Support of X.21, X.21 bis and X.20 bis based Data Terminal
Equipments (DTEs) by an Integrated Services Digital Network (ISDN)".
[48] ITU-T Recommendation F.721: "Videotelephony teleservice for ISDN".
[49] ISO/IEC 7776: "Information technology - Telecommunications and information exchange between
systems - High-level data link control procedures - Description of the X.25 LAPB-compatible
DTE data link procedures".
ETSI
9 ETSI TS 102 110-2 V1.1.1 (2003-03)
[50] ISO/IEC 8208: "Information technology - Data communications - X.25 Packet Layer Protocol for
Data Terminal Equipment".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
Abstract Test Case (ATC): Refer to ISO/IEC 9646-1 [20].
Abstract Test Suite (ATS): Refer to ISO/IEC 9646-1 [20].
Implementation Under Test (IUT): Refer to ISO/IEC 9646-1 [20].
lower tester: Refer to ISO/IEC 9646-1 [20].
Implementation Conformance Statement (ICS) proforma: Refer to ISO/IEC 9646-1 [20].
Implementation eXtra Information for Testing (IXIT) proforma: Refer to ISO/IEC 9646-1 [20].
Point of Control and Observation: Refer to ISO/IEC 9646-1 [20].
Protocol Implementation Conformance Statement (PICS): Refer to ISO/IEC 9646-1 [20].
Protocol Implementation eXtra Information for Testing (PIXIT): Refer to ISO/IEC 9646-1 [20].
System Under Test (SUT): Refer to ISO/IEC 9646-1 [20].
3.2 Definitions related to test purpose descriptions
Alternate speech and facsimile group 3 (TS 61): teleservice which allows the connection of ITUgroup 3 fax apparatus
(send and/or receive) to the mobile stations of a GSM PLMN
NOTE: Facsimile connections may be established to/from group 3 apparatus in the PSTN, ISDN or GSM PLMN.
Alternate Speech/Data: which provides the capability to swap between speech and data during a call
NOTE: If either the speech or data portion of the call requires a full rate channel, a full rate channel shall be used
for the duration of the call. The access interface at the mobile station for the data portion is assumed to be
a standard data interface. Some means must be provided to select the speech/data capability.
Automatic Facs. group 3 (TS 62): teleservice which allows connection of ITUgroup 3 fax apparatus to and from the
mobile stations of a GSM PLMN
NOTE: Facsimile connections may be established to and from group 3 apparatus in the PSTN, ISDN or GSM
PLMN.
BC=3,1 kHz audio: Bearer Capability information element with its information transfer capability field set to "3,1 kHz
Audio" and its user information layer one protocol field set to "G.711 A-law"
NOTE: See ETS 300 084 [3].
BC=speech: Bearer Capability information element with its information transfer capability field set to "speech" and its
user information layer one protocol field set to "G.711 A-law"
NOTE: See ETS 300 083 [2].
BC=UDI : Bearer Capability information element with its information transfer capability set to "unrestricted digital
information"
NOTE: See EN 300 403-1 [1].
ETSI
10 ETSI TS 102 110-2 V1.1.1 (2003-03)
BC=UDI/TA: Bearer Capability information element with its information transfer capability set to "unrestricted digital
information with tones/announcements" and its user information layer one protocol field set to
"IUT-T Recommendations H.221 and H.242"
NOTE: See EN 300 267-1 [4].
BC=V110/X30: Bearer Capability information element with its information transfer capability set to "unrestricted
digital information" and its user information layer 1 field set to "ITUstandardised rate adaption V.110/X.30", including
sync/async and user rate values
NOTE: See EN 300 403-1 [1].
CF active: Call Forwarding (U, B or NR) supplementary service already activated with the address of user C
NOTE: See EN 300 207-1 [14].
CUG default request: calling user do not include in the outgoing SETUP message a explicit request for the CUG
supplementary service
NOTE: See EN 300 138-1 [11].
GSM-BC=3,1 kHz: (External to the PLMN) used to select a "3,1 kHz audio" interworking function at the MSC
NOTE: This service category is used when interworking with the ISDN or PSTN "3,1 kHz audio" service and
includes the capability to select a modem at the interworking function. "External to the PLMN" indicates
that the "3,1 kHz audio" service is only used outside of the PLMN, in the ISDN/PSTN. The connection
within the PLMN, user access point to the interworking function, is an unrestricted digital connection.
GSM-BC=Speech (TS 11): service which provides the transmission of speech information and audible signalling tones
of the PSTN/ISDN
NOTE: In the GSM PLMN and the fixed network processing technique appropriate for speech such as analogue
transmission, echo cancellation and low bit rate voice encoding may be used.
GSM-BC=UD: Unrestricted Digital information (UD) which provides the transfer of unrestricted digital information
GSM - Bearer service categories: all bearer service categories which provide information transfer between R/S
reference points and allow the use of sub-rate information streams which are rate adapted
GSM teleservices: teleservices supported by a GSM PLMN are described by a number of attributes which are intended
to be largely independent
NOTE: They are grouped into three categories:- High layer attributes - Low layer attributes (describing the Bearer
capabilities which support the Teleservice). - information transfer attributes, - access attributes. - General
attributes.
HLC = Facsimile G2/G3: High Layer Compatibility information element with its high layer characteristics
identification field set to "facsimile group 2/3 (ITU-T Recommendation F.182)"
NOTE: See EN 300 403-1 [1].
HLC=facsimile group 4: High Layer Compatibility information element with its high layer characteristics
identification field set to "facsimile group 4 class 1"
NOTE: See EN 300 403-1 [1] and ETS 300 080 [5].
HLC=telephony: High Layer Compatibility information element with its high layer characteristics identification field
set to "telephony"
NOTE: See EN 300 289 [19].
HLC=telex: High Layer Compatibility information element with its high layer characteristics identification field set to
"telex"
ETSI
11 ETSI TS 102 110-2 V1.1.1 (2003-03)
HLC=videotelephony_ic: High Layer Compatibility information element with its high layer characteristics
identification field set to "videotelephony (ITU-T Recommendation F.721)" and its extended audiovisual characteristics
field set to "capability set of initial channel of ITU-T Recommendation H.221"
NOTE: See EN 300 267-1 [4] and EN 300 403-1 [1].
LLC=telematic_term: Low Layer Compatibility information element with its user information layer 2 field indicating
"ISO/IEC 7776 DTE-DTE operation" and user information layer 3 field indicating "ISO/IEC 8208"
NOTE: See EN 300 403-1 [1] and ETS 300 080 [5].
LLC = V110/X30: Low Layer Compatibility information element with its user information layer 1 field indicating
"ITUstandardised rate adaption V.110/X.30" and including sync/async and user rate values
LLC=voice band data via modem: Low Layer Compatibility information element with its user information layer 1
field indicating a "modem type" coding
NOTE: See EN 300 403-1 [1] and ETS 300 103 [6].
NPI=unknown: Numbering Plan Identification coded as "unknown"
NOTE: See EN 300 403-1 [1].
PI=PR: Presentation Indicator coded as "Presentation restricted"
NOTE: See EN 300 403-1 [1].
SI=NP: Screening Indicator coded as "Network provided"
NOTE: See EN 300 403-1 [1].
SI=UPVP: Screening Indicator forwarded to the served user coded as "User-provided, verified and passed"
Speech followed by Data: which provides a speech connection first and then at some time while the call is in progress,
the user can switch to a data connection
NOTE: The user cannot switch back to speech after the data portion. If either the speech or data portion of the call
requires a full rate channel, a full rate channel shall be used from the start of the call. The network may
then change to a half rate channel for the data portion.
TON=international: Type Of Number coded as "international"
NOTE: See EN 300 403-1 [1].
TON=unknown: Type Of Number coded as "unknown"
NOTE: See EN 300 403-1 [1].
UI length=32: length of the User Information field of the User-user information element is 35 octets
3.3 Abbreviations
For the purpose of the present document, the following abbreviations apply:
3PTY Three-ParTY conference
ATS Abstract Test Suite
BC Bearer Capability information element
BS Base Station
BSS Base Station System
CAMEL Customized Applications for Mobile network Enhanced Logic
CD Call Deflection
CDMA Code Division Multiple Access
CFB Call Forwarding Busy
CFNR Call Forwarding No Response
CFNRc Call Forwarding on mobile subscriber Not Reachable
ETSI
12 ETSI TS 102 110-2 V1.1.1 (2003-03)
CFNRy Call Forwarding on No Reply
CFU Call Forwarding Unconditional
CLIP Calling Line Identification Presentation
CLIR Calling Line Identification Restriction
COLP COnnected Line identification Presentation
COLR COnnected Line identification Restriction
CONF CONFerence (add-on)
CUG Closed User Group
CW Call Waiting
ECT Explicit Call Transfer
FPH FreePHone service
GSM Global System for Mobile communication
HLC High Layer Compatibility information element
HPLMN Home Public Land Mobile Network
IA Incoming Access
ICB Incoming Calls Barred within a CUG
IMSI International Mobile Subscriber Identity
IN Intelligent Network
INAP Intelligent Network Application Part
IP Internet Protocol
ISDN Integrated Services Digital Network
ISUP ISDN User Part
IUT Implementation Under Test
LLC Low Layer Compatibility information element
MAP Mobile Application Part
MCID Malicious Call IDentification
MOT Means Of Testing
MS Mobile Station
MS Mobile Subscriber
MSC Mobile Switching Center
MSISDN Mobile Station ISDN number
MT Mobile Terminal
MTC Mobile Terminated Call
NIT Network Integration Testing
NPI Numbering Plan Identification
OCB Outgoing Calls Barred within a CUG
PI Presentation Indicator
PICS Protocol Implementation Conformance Statement
PIXIT Protocol Implementation eXtra Information for Testing
PLMN Public Land Mobile Network
PSTN Public Switched Telephone Network
SGSN Serving GPRS Support Node
SI Screening Indicator
SME Service Mediation Environment
SMS Short Message Service
SUB SUBaddressing
SUT System Under Test
TON Type Of Number
TP Terminal Portability
TP Test Plant
TS TeleService
TSS Test Suite Structure
TSS&TP Test Suite Structure and Test Purposes
UD Unrestricted Digital information
UI User Information
UMTS Universal Mobile Telecommunications System
UUS User-to-User Signalling
UUS1 UUS service 1
UUS2 UUS service 2
UUS3 UUS service 3
VPLMN Visited Public Land Mobile Network
ETSI
13 ETSI TS 102 110-2 V1.1.1 (2003-03)
4 Conformance to this ICS and IXIT proformas
specification
If it claims to conform to the present document, the actual ICS proforma to be filled in by a supplier shall be technically
equivalent to the text of the ICS proforma given in annex A, and shall preserve the numbering/naming and ordering of
the proforma items.
An ICS which conforms to the present document shall be a conforming ICS proforma completed in accordance with the
guidance for completion given in clause A.1.
A test realizer, producing a executable test suite for this ATS specification is required, as specified in
ISO/IEC 9646-7 [42], to produce an augmented partial IXIT proforma conformant with the text of the partial IXIT
proforma given in annex B.
An augmented partial IXIT proforma which conforms to this partial IXIT proforma specification shall, as a minimum,
have contents which are technically equivalent to annex B. The augmented partial IXIT proforma may contain
additional questions that need to be answered in order to prepare the Means Of Testing (MOT) for a particular IUT. The
test laboratory may further augment the augmented partial IXIT proforma to produce a IXIT proforma conformant with
this partial IXIT proforma specification.
A IXIT proforma whic0h conforms to this partial IXIT proforma specification shall, as a minimum, have contents
which are technically equivalent to annex B. The IXIT proforma may contain additional questions that need to be
answered in order to prepare the test laboratory for a particular IUT.
ETSI
14 ETSI TS 102 110-2 V1.1.1 (2003-03)
Annex A (normative):
End-to-end ICS proforma
Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that
users of the present document may freely reproduce the ICS proforma in this annex so that it can be used for its
intended purposes and may further publish the completed ICS.
A.1 Guidance for completing the ICS proforma
A.1.1 Purposes and structure
The purpose of this ICS proforma is to provide a mechanism whereby a supplier of an implementation of the
requirements defined by ETSI, may provide information about the implementation in a standardized manner.
The proforma is subdivided into subclauses for the following categories of information:
- guidance for completing the proformas;
- identification of the implementation;
- global statement of conformance.
A.1.2 Abbreviations and conventions
The ICS proforma contained in the annexes A is comprised of information in tabular form in accordance with the
guidelines presented in ISO/IEC 9646-7 [42].
Item column
The item column contains a number which identifies the item in the table.
Item description column
The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly
means "is supported by the implementation?".
Status column
The following notations, defined in ISO/IEC 9646-7 [42], are used for the status column:
m mandatory - the capability is required to be supported.
o optional - the capability may be supported or not.
n/a not applicable - in the given context, it is impossible to use the capability.
x prohibited (excluded) - there is a requirement not to use this capability in the given context.
o.i qualified optional - for mutually exclusive or selectable options from a set. "i" is an integer which
identifies an unique group of related optional items and the logic of their selection which is
defined immediately following the table.
ci conditional - the requirement on the capability ("m", "o", "x" or "n/a") depends on the support of
other optional or conditional items. "i" is an integer identifying an unique conditional status
expression which is defined immediately following the table.
ETSI
15 ETSI TS 102 110-2 V1.1.1 (2003-03)
i irrelevant (out-of-scope) - capability outside the scope of the reference specification. No answer is
requested from the supplier.
NOTE 1: This use of "i" status is not to be confused with the suffix "i" to the "o" and "c" statuses above.
Reference column
The reference column makes reference to ETS [], except where explicitly stated otherwise.
Support column
The support column shall be filled in by the supplier of the implementation. The following common notations, defined
in ISO/IEC 9646-7 [42], are used for the support column:
Y or y supported by the implementation.
N or n not supported by the implementation.
N/A, n/a or - no answer required (allowed only if the status is n/a, directly or after evaluation of a conditional
status).
If this ICS proforma is completed in order to describe a multiple-profile support in a system, it is necessary to be able to
answer that a capability is supported for one profile and not supported for another. In that case, the supplier shall enter
the unique reference to a conditional expression, preceded by "?" (e.g. ?3). This expression shall be given in the space
for comments provided at the bottom of the table. It uses predicates defined in the SCS, each of which refers to a single
profile and which takes the value TRUE if and only if that profile is to be used.
EXAMPLE 1: ?3: IF prof1 THEN Y ELSE N
NOTE 2: As stated in ISO/IEC 9646-7 [42], support for a received PDU requires the ability to parse all valid
parameters of that PDU. Supporting a PDU while having no ability to parse a valid parameter is
non-conformant. Support for a parameter on a PDU means that the semantics of that parameter are
supported.
Values allowed column
The values allowed column contains the type, the list, the range, or the length of values allowed. The following
notations are used:
- range of values: .
example: 5 . 20
- list of values: , , .,
example: 2 ,4 ,6 ,8, 9
example: '1101'B, '1011'B, '1111'B
example: '0A'H, '34'H, '2F'H
- list of named values: (), (), ., ()
example: reject(1), accept(2)
- length: size ( . )
example: size (1 . 8)
Values supported column
The values supported column shall be filled in by the supplier of the implementation. In this column, the values or the
ranges of values supported by the implementation shall be indicated.
ETSI
16 ETSI TS 102 110-2 V1.1.1 (2003-03)
References to items
For each possible item answer (answer in the support column) within the ICS proforma a unique reference exists, used,
for example, in the conditional expressions. It is defined as the table identifier, followed by a solidus character "/",
followed by the item number in the table. If there is more than one support column in a table, the columns are
discriminated by letters (a, b, etc.), respectively.
EXAMPLE 2: A.5/4 is the reference to the answer of item 4 in table 5 of annex A.
EXAMPLE 3: A.6/3b is the reference to the second answer (i.e. in the second support column) of item 3 in
table 6 of annex A.
Prerequisite line
A prerequisite line takes the form: Prerequisite: .
A prerequisite line after a clause or table title indicates that the whole clause or the whole table is not required to be
completed
...