SIST EN 480-13:2009
(Main)Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures
Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures
This standard specifies the constituent materials, the composition and the mixing procedure to produce a reference masonry mortar with a prescribed consistence for testing mortar admixtures as defined in EN 934-3. It also describes the determination of the water reduction of the test mix compared to the control mix.
Zusatzmittel für Beton, Mörtel und Einpressmörtel - Prüfverfahren - Teil 13: Referenz-Baumörtel für Prüfung von Zusatzmitteln für Mörtel
Diese Norm legt die Bestandteile, die Zusammensetzung und das Mischverfahren für die Herstellung eines Referenz Baumörtels mit Normkonsistenz für die Prüfung von Zusatzmitteln für Mörtel fest, wie sie in EN 934 3 definiert sind. Sie beschreibt auch die Bestimmung der Herabsetzung des Wasseranteils der Prüf-mischung im Vergleich zur Kontrollmischung.
Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Partie 13 : Mortier à maçonner de référence pour les essais menés sur les adjuvants de mortier
La présente norme spécifie les constituants, la composition et la méthode de malaxage pour la confection d’un
mortier à maçonner de référence ayant une consistance prescrite destiné à la réalisation d’essais sur les adjuvants
pour mortiers conformément à l’EN 934-3. Elle décrit également la méthode de détermination de la réduction de la
teneur en eau du mortier adjuvanté par rapport au mortier témoin.
Kemijski dodatki za beton, malto in injekcijsko maso - Metode preskušanja - 13. del: Referenčna malta za zidanje za preskušanje kemijskih dodatkov za malte
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 480-13:2009
01-december-2009
1DGRPHãþD
SIST EN 480-13:2003
.HPLMVNLGRGDWNL]DEHWRQPDOWRLQLQMHNFLMVNRPDVR0HWRGHSUHVNXãDQMD
GHO 5HIHUHQþQDPDOWD]D]LGDQMH]DSUHVNXãDQMHNHPLMVNLKGRGDWNRY]DPDOWH
Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry
mortar for testing mortar admixtures
Zusatzmittel für Beton, Mörtel und Einpressmörtel - Prüfverfahren - Teil 13: Referenz-
Baumörtel für Prüfung von Zusatzmitteln für Mörtel
Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Partie 13 : Mortier à
maçonner de référence pour les essais menés sur les adjuvants de mortier
Ta slovenski standard je istoveten z: EN 480-13:2009
ICS:
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST EN 480-13:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 480-13:2009
---------------------- Page: 2 ----------------------
SIST EN 480-13:2009
EUROPEAN STANDARD
EN 480-13
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2009
ICS 91.100.10 Supersedes EN 480-13:2002
English Version
Admixtures for concrete, mortar and grout - Test methods - Part
13: Reference masonry mortar for testing mortar admixtures
Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Zusatzmittel für Beton, Mörtel und Einpressmörtel -
Partie 13 : Mortier à maçonner de référence pour les essais Prüfverfahren - Teil 13: Referenz-Baumörtel für die Prüfung
menés sur les adjuvants de mortier von Zusatzmitteln für Mörtel
This European Standard was approved by CEN on 10 August 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 480-13:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 480-13:2009
EN 480-13:2009 (E)
Contents
page
Foreword . 3
1 Scope . 4
2 Normative references . 4
3 Constituent materials . 4
3.1 Cement . 4
3.2 Sand . 4
3.3 Mixing water . 5
4 Reference masonry mortar . 5
5 Production of reference mortar with standard consistence . 5
5.1 Mix proportions . 5
5.2 Mixing procedure . 6
5.3 Mortar for test after standing . 6
5.4 Mortar for test after extended mixing . 6
6 Calculation of water reduction (air entraining/plasticizing admixtures) . 6
7 Test report . 7
2
---------------------- Page: 4 ----------------------
SIST EN 480-13:2009
EN 480-13:2009 (E)
Foreword
This document (EN 480-13:2009) has been prepared by Technical Committee CEN/TC 104 “Concrete and related
products”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by March 2010, and conflicting national standards shall be withdrawn at the latest by
March 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.
CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 480-13:2002.
This document has been prepared by Subcommittee 3 (SC 3) of TC 104 "Admixtures for concrete".
The present standard is applicable together with the standards of the EN 480 and EN 934 series.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembou
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zusatzmittel für Beton, Mörtel und Einpressmörtel - Prüfverfahren - Teil 13: Referenz-Baumörtel für Prüfung von Zusatzmitteln für MörtelAdjuvants pour béton, mortier et coulis - Méthodes d'essai - Partie 13 : Mortier à maçonner de référence pour les essais menés sur les adjuvants de mortierAdmixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:Ta slovenski standard je istoveten z:FprEN 480-13kSIST FprEN 480-13:2009en,fr,de01-junij-2009kSIST FprEN 480-13:2009SLOVENSKI
STANDARD
kSIST FprEN 480-13:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMFINAL DRAFTFprEN 480-13April 2009ICS 91.100.10Will supersede EN 480-13:2002
English VersionAdmixtures for concrete, mortar and grout - Test methods - Part13: Reference masonry mortar for testing mortar admixturesAdjuvants pour béton, mortier et coulis - Méthodes d'essai -Partie 13 : Mortier à maçonner de référence pour les essaismenés sur les adjuvants de mortierZusatzmittel für Beton, Mörtel und Einpressmörtel -Prüfverfahren - Teil 13: Referenz-Baumörtel für Prüfungvon Zusatzmitteln für MörtelThis draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the TechnicalCommittee CEN/TC 104.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations whichstipulate the conditions for giving this European Standard the status of a national standard without any alteration.This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other languagemade by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice andshall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. FprEN 480-13:2009: EkSIST FprEN 480-13:2009
FprEN 480-13:2009 (E) 2 Contents page Foreword . 31Scope . 42Normative references . 43Constituent materials . 43.1Cement . 43.2Sand . 43.3Mixing water . 54Reference masonry mortar . 55Production of reference mortar with standard consistence . 55.1Mix proportions . 55.2Mixing procedure . 65.3Mortar for test after standing . 65.4Mortar for test after extended mixing . 66Calculation of water reduction (air entraining/plasticizing admixtures) . 67Test report . 7 kSIST FprEN 480-13:2009
FprEN 480-13:2009 (E) 3 Foreword This document (FprEN 480-13:2009) has been prepared by Technical Committee CEN/TC 104 “Concrete and related products”, the secretariat of which is held by DIN. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 480-13:2002. This document has been prepared by Subcommittee 3 (SC 3) of TC 104 "Admixtures for concrete". The present standard is applicable together with the standards of the EN 480 and EN 934 series. kSIST FprEN 480-13:2009
FprEN 480-13:2009 (E) 4 1 Scope This standard specifies the constituent materials, the composition and the mixing procedure to produce a reference masonry mortar with a prescribed consistence for testing mortar admixtures as defined in EN
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.