iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50291-2:2010/oprAA:2016

(Amendment)

Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft - Additional test methods and performance requirements

Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft - Additional test methods and performance requirements

To correct the EMC levels in EN 50291-2:2010

Elektrische Geräte für die Detektion von Kohlenmonoxid in Wohnhäusern - Teil 2: Ortsfeste elektrische Geräte zum kontinuierlichen Betrieb in Freizeitfahrzeugen und ähnlichen Umgebungen einschließlich Sportbooten - Ergänzende Prüfverfahren und Anforderungen an das Betriebsverhalten

Appareils électriques pour la détection de monoxyde de carbone dans les locaux à usage domestique - Partie 2: Appareils électriques en fonctionnement continu et en installation fixe dans les véhicules de loisir et locaux similaires incluant les embarcations de loisir - Méthodes d'essai supplémentaires et exigences d'aptitude à la fonction

Električne naprave za odkrivanje ogljikovega monoksida v gospodinjstvih - 2. del: Električne naprave za stalno delovanje v nepremičnih inštalacijah na rekreacijskih vozilih in na sorodnih področjih, vključno na rekreacijskih plovilih - Dodatne preskusne metode in zahtevane lastnosti - Dopolnilo AA

General Information

Status
Not Published
Public Enquiry End Date
18-Feb-2016
ICS
13.320 - Alarm and warning systems
Technical Committee
I09 - Imaginarni 09
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
05-Nov-2019
Due Date
10-Nov-2019
Completion Date
05-Nov-2019
Ref Project
EN 50291-2:2010/prAA:2015 - Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft - Additional test methods and performance requirements

Relations

Amends
SIST EN 50291-2:2010 - Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft - Additional test methods and performance requirements
Effective Date
07-Jun-2022
Amends
SIST EN 50291-2:2010 - Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft - Additional test methods and performance requirements
Effective Date
12-Jun-2014

Buy Standard

EN 50291-2:2010/oprAA:2016EN 50291-2:2010/oprAA:2016
PreviousNext
Draft
EN 50291-2:2010/oprAA:2016
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50291-2:2010/oprAA:2016
01-februar-2016
(OHNWULþQHQDSUDYH]DRGNULYDQMHRJOMLNRYHJDPRQRNVLGDYJRVSRGLQMVWYLKGHO
(OHNWULþQHQDSUDYH]DVWDOQRGHORYDQMHYQHSUHPLþQLKLQãWDODFLMDKQDUHNUHDFLMVNLK
YR]LOLKLQQDVRURGQLKSRGURþMLKYNOMXþQRQDUHNUHDFLMVNLKSORYLOLK'RGDWQH
SUHVNXVQHPHWRGHLQ]DKWHYDQHODVWQRVWL'RSROQLOR$$
Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2:
Electrical apparatus for continuous operation in a fixed installation in recreational
vehicles and similar premises including recreational craft - Additional test methods and
performance requirements
Elektrische Geräte für die Detektion von Kohlenmonoxid in Wohnhäusern - Teil 2:
Ortsfeste elektrische Geräte zum kontinuierlichen Betrieb in Freizeitfahrzeugen und
ähnlichen Umgebungen einschließlich Sportbooten - Ergänzende Prüfverfahren und
Anforderungen an das Betriebsverhalten
Appareils électriques pour la détection de monoxyde de carbone dans les locaux à
usage domestique - Partie 2: Appareils électriques en fonctionnement continu et en
installation fixe dans les véhicules de loisir et locaux similaires incluant les embarcations
de loisir - Méthodes d'essai supplémentaires et exigences d'aptitude à la fonction
Ta slovenski standard je istoveten z: EN 50291-2:2010/prAA:2015
ICS:
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
SIST EN 50291-2:2010/oprAA:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50291-2:2010/oprAA:2016

---------------------- Page: 2 ----------------------

SIST EN 50291-2:2010/oprAA:2016


EUROPEAN STANDARD DRAFT
EN 50291-2:2010
NORME EUROPÉENNE

EUROPÄISCHE NORM
prAA
November 2015
ICS 13.320

English Version
Electrical apparatus for the detection of carbon monoxide in
domestic premises - Part 2: Electrical apparatus for continuous
operation in a fixed installation in recreational vehicles and
similar premises including recreational craft - Additional test
methods and performance requirements
Appareils électriques pour la détection de monoxyde de Elektrische Geräte für die Detektion von Kohlenmonoxid in
carbone dans les locaux à usage domestique - Partie 2: Wohnhäusern - Teil 2: Ortsfeste elektrische Geräte zum
Appareils électriques en fonctionnement continu et en kontinuierlichen Betrieb in Freizeitfahrzeugen und ähnlichen
installation fixe dans les véhicules de loisir et locaux Umgebungen einschließlich Sportbooten - Ergänzende
similaires incluant les embarcations de loisir - Méthodes Prüfverfahren und Anforderungen an das Betriebsverhalten
d'essai supplémentaires et exigences d'aptitude à la
fonction
This draft amendment prAA, if approved, will modify the European Standard EN 50291-2:2010; it is submitted to CENELEC members for
enquiry.
Deadline for CENELEC: 2016-02-19.

It has been drawn up by CLC/TC 216.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 58514 Ref. No. EN 50291-2:2010/prAA:2015 E

---------------------- Page: 3 ----------------------

SIST EN 50291-2:2010/oprAA:2016
EN 50291-2:2010/prAA:2015
Contents
European foreword .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50194-1:2023(Main)
Electrical apparatus for the detection of flammable gases in household premises - Part 1: Test methods and performance requirements
EN 50194-1:2023

With the revision of the EN 50194-1, it should be included also the Household applications and in general what not covered by the IEC-EN 60079-29-1, that is the non classified areas. It will be to evaluate if to consider not only the detectors (normally stand alone) but also the sensors or module that, without enclosure, may be integrate inside some Appliances.
Finally in this new revision it should be implemented the reference to the family standard developed in gas detection in the past years and not included in the present standard

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50292:2023(Main)
Electrical apparatus for the detection of carbon monoxide in domestic premises, caravans and boats - Guide on the selection, installation, use and maintenance
EN 50292:2023

This document serves as a guide on the selection, installation, use and maintenance of apparatus for the
detection of carbon monoxide, intended for continuous operation in a fixed installation in domestic premises,
caravans and boats. This guide is intended to cover any type of domestic or residential accommodation,
including leisure accommodation vehicles such as touring and static caravans, and motor homes; and
recreational craft such as canal barges. Some static caravans are used as permanent dwellings; in such cases
EN 50291-1 is appropriate. For all other types of caravan, EN 50291-2 is appropriate. This guide is read in
conjunction with EN 50291-1 and EN 50291-2 together with any additional relevant national or local regulations.
This document refers to the installation of two types of apparatus:
a) Type A apparatus, to provide a visual and audible alarm and an executive action in the form of an output
signal that can be used to actuate directly or indirectly a ventilation or other ancillary device;
b) Type B apparatus, to provide a visual and audible alarm only.
This document excludes apparatus for the detection of combustible gases (see EN 50244) and for industrial
installations or commercial premises.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50695:2021(Main)
Public-address-general-emergency-alarm-system, communication-system for marine applications
EN 50695:2021

This standard describes requirements, performances and test-procedures for Public-Address-Systems (PA) and General-Alarm (GA) Communication-systems for marine applications. The standard is focused on all necessities to get a harmonized standard for marine PAGA Com.
The standard refers as much as possible to relevant established standards. Where relevant standard do not exist or are not precise enough, this standard will describe additionally own definitions , requirements performances and test-procedures

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50291-1:2018/AC:2021(Corrigendum)
Gas detectors - Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and performance requirements
EN 50291-1:2018/AC:2021-01

TC - in order to correct in-text citations

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50676:2020(Main)
Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods
EN 50676:2019

This document will define test methods and performance requirements for all electrical equipment used for the detection of the refrigerant gases as defined in EN 378 1 as well as SF6 by means of concentration measurement.
NOTE 1   For the purposes of this standard, the term “refrigerant gases” includes refrigerant gases defined in EN 378 1 as well as SF6.
This document specifies general requirements for the construction, testing and performance of electrically operated refrigerant gas detection equipment in safety applications.
The application is intended to also consider electrical equipment in refrigeration systems according to the F-Gas Regulation.
This document is applicable to apparatuses whose primary purpose is to provide an indication, alarm and/or other output function to warn of the presence of refrigerant gases or SF6 in an industrial or commercial environment and, in some cases, to initiate automatic or manual protective actions. It is applicable to apparatuses in which the sensor automatically generates an electrical signal when gas is present.
Some of these refrigerant gases could be also classified as toxic gases or vapours intended for exposure measurement or as flammable gases.
In accordance with the classification of the gas and the tasks covered in EN 60079-29-1:2016, EN 45544-2:2015 and EN 45544-3:2015 for refrigeration application, three different types of equipment are provided (see also Table A.1).
-   Type I: Refrigerant gas detection equipment for A2, A2L, R717, A3, B3 refrigerants as per safety class in EN 378 1:2016 Annex E in accordance with explosion protection. The equipment shall follow the existing performances in EN 60079 29 1:2016 for ranges up to 20 % LEL and or 0 % – 100 % LEL.
-   Type II: Refrigerant gas detection equipment for A1, A2L, B1, B2L refrigerant gases as per safety class in EN 378 1:2016 Annex E in accordance with OEL values. The equipment shall follow the performances in EN 45544-2:2015.
-   Type III Refrigerant gas detection equipment not covered by Type I or Type II for refrigerant gases A1, A2L, B1, B2L as per safety class in EN 378 1:2016 Annex E. The equipment shall follow the performances in EN 45544-3:2015
This document does not apply to non-refrigerant applications:
-   monitoring of combustible gases in the range up to 20 % or up to 100 % of the LEL level, covered by EN 60079 29 1:2016;
-   workplace atmospheres, covered by the EN 45544 series.
This document is not applicable to equipment:
-   used for air pollution monitoring;
-   external sampling systems;
-   open path gas detection;
-   residential applications;
-   process control;
-   leakage (emission rate monitoring) detection system for SF6.
NOTE 2   SF6 equipment is typically located in large and ventilated rooms or outdoor, so that monitoring SF6 concentrations in the surrounding atmosphere does not permit a reliable detection of leakages.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62401:2019(Main)
Radiation protection instrumentation - Alarming personal radiation devices (PRDs) for the detection of illicit trafficking of radioactive material (IEC 62401:2017)
EN IEC 62401:2019

This standard applies to alarming radiation detection instruments that are pocket-sized, carried on the body and used to detect and indicate the presence and general magnitude of gamma radiation fields. Neutron detection may also be provided.
Personal Radiation Devices (PRDs) alert the user to the presence of a source of radiation that is distinctly above the measured average local background radiation level. They are not intended to provide a measurement of the ambient or personal dose equivalent rate.
This document does not apply to the ambient or personal dose equivalent rate meters which are covered in IEC 60846-1 or IEC 61526, respectively. If the manufacturer states that the PRD can be used for radiation protection purposes, compliance with IEC 60846-1 or IEC 61526 will be needed.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50291-2:2019(Main)
Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft - Additional test methods and performance requirements
EN 50291-2:2019

This document specifies general requirements for the construction, testing and performance of electrically operated carbon monoxide gas detection apparatus, designed for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft.
NOTE   For caravan holiday homes EN 50291-1 applies.
This European Standard specifies apparatus designed to operate in the event of an escape of carbon monoxide and to provide a visual and audible alarms only (Type B of EN 50291-1), or to provide visual and audible alarms and an executive action in the form of an output signal that can actuate directly or indirectly a shut-off device and/or other ancillary device (Type A of EN 50291-1).
This European Standard excludes apparatus
-   for the detection of combustible gases, other than carbon monoxide itself (see EN 50194 1),
-   for the detection of CO in industrial installations (see EN 45544-1, EN 45544-2 and EN 45544-3) or commercial premises,
-   for CO measurement for smoke and fire detection.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50194-2:2019(Main)
Electrical apparatus for the detection of combustible gases in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises - Additional test methods and performance requirements
EN 50194-2:2019

This document specifies test methods and performance requirements for electrical apparatus for the detection of
combustible gases designed for continuous operation in a fixed installation in recreational vehicles and similar
premises.
NOTE 1 For caravan holiday homes EN 50194-1 applies.
This document specifies apparatus designed to operate in the event of an escape of liquefied petroleum gas (LPG)
and/or petrol (gasoline) vapour and to provide a visual and audible alarm and an executive action in the form of an
output signal that can actuate directly or indirectly a shut-off device and/or other ancillary device (Type A of
EN 50194-1).
The document excludes apparatus for the detection of toxic gases such as carbon monoxide (see EN 50291).
Apparatus complying with this document is not considered suitable for industrial or commercial installations for
which EN 60079-29-1 apply.
NOTE 2 Apparatus tested in accordance with EN 60079-29-1 will not necessarily comply with this standard.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50291-1:2018(Main)
Gas detectors - Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and performance requirements
EN 50291-1:2018

This European Standard specifies general requirements for the construction, testing and performance of electrically operated carbon monoxide gas detection apparatus, designed for continuous operation in domestic premises. The apparatus may be mains-powered or battery-powered. Such apparatus is intended to warn of an accumulation of CO, enabling the occupant to react before being exposed to significant risk.
Additional requirements for apparatus to be used in recreational vehicles and similar premises are specified in EN 50291-2.
NOTE 1   For caravan holiday homes EN 50291-1 applies.
This European Standard specifies two types of apparatus, these are:
-   type A - to provide a visual and audible alarm and an executive action in the form of a transmittable output signal that can be used to actuate directly or indirectly a ventilation or other ancillary device;
-   type B - to provide a visual and audible alarm only.
NOTE 2   Both type A and type B apparatus can be interconnected.
This European Standard excludes apparatus for:
-   the detection of combustible gases, other than carbon monoxide itself (see EN 50194-1);
-   the detection of CO in industrial installations (see EN 45544-1, EN 45544-2 and EN 45544-3) or commercial premises;
-   CO measurement for smoke and fire detection;
-   CO measurement in carparks and tunnels.
NOTE 3   See EN 50545-1.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    42 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62618:2016(Main)
Radiation protection instrumentation - Spectroscopy-based alarming Personal Radiation Detectors (SPRD) for the detection of illicit trafficking of radioactive material (IEC 62618:2013)
EN 62618:2016

This standard applies to Spectroscopy-based alarming Personal Radiation Detectors (SPRD) which represent a new instrument category between alarming Personal Radiation Devices (PRD) and Radionuclide Identification Devices (RID). SPRDs are advanced PRDs that can be worn on a belt or in a pocket to alert the wearer of the presence of a radiation source. They are not intended for accurate measurement of personal or ambient dose equivalent (rate). In addition to the features of conventional PRDs, SPRDs provide rapid simultaneous search and identification capability to locate and identify radiation sources.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day