iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

kSIST FprEN ISO 29862:2024

(Main)

Self adhesive tapes - Determination of peel adhesion properties (ISO/FDIS 29862:2024)

Self adhesive tapes - Determination of peel adhesion properties (ISO/FDIS 29862:2024)

This document specifies a series of methods for the determination of peel adhesion properties of self adhesives tapes.
This document contains:
— Method 1: Self adhesive tapes ? Measurement of peel adhesion from stainless steel at an angle of 180°;
— Method 2: Self adhesive tapes ? Measurement of peel adhesion from its own backing at an angle of 180°;
— Method 3: Self adhesive tapes ? Measurement of peel adhesion of double sided and transfer tapes at an angle 180°;
— Method 4: Self adhesive tapes ? Measurement of adhesion of the liner to an adhesive tape at an angle of 180°.
Annexes A and B specify further variations in the testing protocol according to specific conditions.

Klebebänder - Bestimmung der Klebkraft (ISO/FDIS 29862:2024)

Dieses Dokument legt eine Reihe von Verfahren zur Bestimmung der Klebkraft von Klebebändern fest.
Dieses Dokument legt Folgendes fest:
   Verfahren 1: Klebebänder — Messung der Klebkraft auf nicht rostendem Stahl unter einem Winkel von 180°;
   Verfahren 2: Klebebänder — Messung der Klebkraft auf der eigenen Rückseite unter einem Winkel von 180°;
   Verfahren 3: Klebebänder — Messung der Klebkraft auf doppelseitig beschichteten und übertragbaren Klebebändern unter einem Winkel von 180°;
   Verfahren 4: Klebebänder — Messung der Klebkraft des Trennmaterials auf Klebeband unter einem Winkel von 180°.

Rubans auto-adhésifs - Détermination des caractéristiques de la force de pelage (pouvoir adhésif linéaire) (ISO/FDIS 29862:2024)

Le présent document spécifie des méthodes d'essai permettant de déterminer les caractéristiques du pouvoir adhésif linéaire des rubans auto-adhésifs.
Le présent document se compose de:
— la méthode 1: Rubans auto-adhésifs ? Mesure du pouvoir adhésif linéaire sur l'acier inoxydable à un angle de 180°;
— la méthode 2: Rubans auto-adhésifs ? Mesure du pouvoir adhésif linéaire sur son propre support à un angle de 180°;
— la méthode 3: Rubans auto-adhésifs ? Mesure du pouvoir adhésif linéaire des rubans double face et transfert à un angle de 180°;
— la méthode 4: Rubans auto-adhésifs ? Mesure du pouvoir adhésif du protecteur anti-adhérent du ruban adhésif à un angle de 180°.
Les Annexes A et B spécifient des variantes du protocole d'essai en fonction de certaines conditions spécifiques.

Samolepilni trakovi - Določevanje lastnosti prilepljivosti (ISO/FDIS 29862:2024)

General Information

Status
Not Published
Public Enquiry End Date
06-Jun-2024
ICS
83.180 - Adhesives
Technical Committee
IPMA - Polimer materials and products
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
19-Sep-2024
Due Date
07-Nov-2024
Completion Date
25-Sep-2024
Ref Project
FprEN ISO 29862 - Self adhesive tapes - Determination of peel adhesion properties (ISO/FDIS 29862:2024)

Relations

Revises
SIST EN ISO 29862:2019 - Self adhesive tapes - Determination of peel adhesion properties (ISO 29862:2018)
Effective Date
25-Oct-2023

Buy Standard

prEN ISO 29862:2024prEN ISO 29862:2024
PreviousNext
Draft
prEN ISO 29862:2024
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
oSIST prEN ISO 29862:2024
01-junij-2024
Samolepilni trakovi - Določevanje lastnosti prilepljivosti (ISO/DIS 29862:2024)
Self adhesive tapes - Determination of peel adhesion properties (ISO/DIS 29862:2024)
Klebebänder - Bestimmung der Klebkraft (ISO/DIS 29862:2024)
Rubans auto-adhésifs - Détermination des caractéristiques de la force de pelage
(pouvoir adhésif linéaire) (ISO/DIS 29862:2024)
Ta slovenski standard je istoveten z: prEN ISO 29862
ICS:
83.180 Lepila Adhesives
oSIST prEN ISO 29862:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN ISO 29862:2024
oSIST prEN ISO 29862:2024
DRAFT
International
Standard
ISO/DIS 29862
ISO/TC 61/SC 11
Self adhesive tapes —
Secretariat: JISC
Determination of peel adhesion
Voting begins on:
properties
2024-03-18
Rubans auto-adhésifs — Détermination des caractéristiques du
Voting terminates on:
pouvoir adhésif linéaire
2024-06-10
ICS: 83.180
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 29862:2024(en)
oSIST prEN ISO 29862:2024
DRAFT
ISO/DIS 29862:2024(en)
International
Standard
ISO/DIS 29862
ISO/TC 61/SC 11
Self adhesive tapes —
Secretariat: JISC
Determination of peel adhesion
Voting begins on:
properties
Rubans auto-adhésifs — Détermination des caractéristiques du
Voting terminates on:
pouvoir adhésif linéaire
ICS: 83.180
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 29862:2024(en)
ii
oSIST prEN ISO 29862:2024
ISO/DIS 29862:2024(en)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Significance and use . 3
5 Method 1 — Self adhesive tapes — Measurement of peel adhesion from stainless steel
at an angle of 180° . 3
5.1 Principle .3
5.2 Materials .3
5.3 Apparatus .4
5.3.1 Test piece cutter .4
5.3.2 Tensile testing machine .4
5.3.3 Stainless steel panels . . .4
5.3.4 Roller mechanically or hand operated .4
5.3.5 Light hand roller .4
5.4 Test samples and test pieces .4
5.5 Procedure .5
5.5.1 Standard test conditions .5
5.5.2 Preparation of the panel .5
5.5.3 Peel adhesion .5
5.6 Expression of results . .5
5.7 Test report .6
6 Method 2 — Self adhesive tapes — Measurement of peel adhesion from its own backing
at an angle of 180° . 6
6.1 Principle .6
6.2 Apparatus .6
6.2.1 Test piece cutter .6
6.2.2 Tensile testing machine .6
6.2.3 Suitable panels .6
6.2.4 Roller mechanically or hand operated .6
6.3 Test samples and test pieces .7
6.4 Procedure .7
6.4.1 Standard test conditions .7
6.4.2 Preparation .7
6.5 Expression of results . .7
6.6 Test report .7
7 Method 3 — Self adhesive tapes — Measurement of peel adhesion of double sided and
transfer tapes at an angle of 180° . 7
7.1 Principle .7
7.2 Materials .7
7.3 Apparatus .7
7.4 Test samples and test pieces .8
7.5 Procedure .8
7.5.1 Standard test conditions .8
7.5.2 Preparation of the panel .8
7.5.3 Procedure for open side of double sided or adhesive transfer tape .8
7.5.4 Procedure for closed side of double sided or adhesive transfer tape .8
7.6 Expression of results .8
7.7 Test report .9
8 Method 4 — Self adhesive tapes — Measurement of adhesion of the liner to an adhesive
tape at an angle of 180° . 9
8.1 Principle .9

iii
oSIST prEN ISO 29862:2024
ISO/DIS 29862:2024(en)
8.1.1 Double sided adhesive tapes .9
8.1.2 Single sided adhesive tapes .9
8.2 Materials .9
8.3
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 10364:2024(Main)
Structural adhesives - Determination of the pot life (working life) of multi-component adhesives (ISO 10364:2024)
EN ISO 10364:2024

This document specifies methods for determining the pot life of multi-part adhesives, in order to be able to determine whether the pot life conforms to the minimum specified working life required of an adhesive.
The different methods described in this document to measure the property do not necessarily provide identical results.
The test methods described are suitable for assessing all multi–part adhesives, and especially epoxy based and polyurethane based adhesives, but they are not suitable for some acrylic-based adhesives.
NOTE 1       Some of the methods described in this document can also be suitable for determination of working life of one-part adhesives that react to humidity (e.g. PUR prepolymers).
NOTE 2       This document can also be used for assessing non-structural adhesives.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21368:2023(Main)
Adhesives - Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures (ISO 21368:2022)
EN ISO 21368:2023

This document provides guidelines describing the adhesive bonding quality requirements suitable for use by adhesive user-
companies utilizing adhesive bonding as a means of fabrication. In particular, the guidelines define various approaches to meeting
quality requirements for fabrication and reporting procedures, both in workshops and on site. These guidelines aim to convey the
importance of maintaining quality standards in fabrication and reporting procedures, keeping records and thus enabling
documentation to provide the basis for risk evaluation of adhesively bonded structures in service and in use.
These guidelines have been prepared such that:
a) they are independent of the type of adhesively bonded structure;
b) they are independent of adhesive user-companies’ and suppliers’ product recommendations;
c) they define the quality requirements for adhesive bonding in terms of fabrication and reporting procedures, both in workshops and
on site;
d) they can be used as the basis for risk evaluation of adhesively bonded structures in service and in use;
e) they can be used as a basis for assessing a fabricator's capability to produce adhesively bonded structures fulfilling specified
quality requirements when they are detailed in one or more of the following:
— a contract between the parties involved;
— an application standard;
— a regulatory statement.
The guidelines contained within this document can be adopted in full or selectively chosen by the adhesive user to suit the structure
concerned. The guidelines provide a flexible framework for the control of adhesive bonding activities in the following cases.
Case 1
The provision of specific requirements for adhesive bonding in contracts that require the adhesive user to have a quality system other
than ISO 9001.
Case 2
The provision of specific requirements for adhesive bonding as guidance to an adhesive user developing a quality system.
Case 3
The provision of specific requirements for references in application standards that uses adhesive bonding as part of its requirements
or in a contract between relevant parties.
Case 4
The provision of a framework for fabrication and reporting procedures to a quality standard, suitable in particular as a basis for the risk
evaluation of adhesively bonded structures

  • Standard
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6076:2023(Main)
Adhesives - Installation of floor coverings, wood flooring, levelling compounds and tiles - Specification of trowel notch sizes (ISO 6076:2023)
EN ISO 6076:2023

This International Standard specifies the individual measurements of notches and assigns specific codes which may then be used to label notched tools complying with the measurements and tolerances specified in this standard.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 302-8:2023(Main)
Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear
EN 302-8:2023

This document specifies a method of determining the ability of adhesive bonds to resist static load. It is applicable to adhesives used in load bearing timber structures.
It is suitable for the following applications:
a)   for assessing the compliance of adhesives according to EN 301, EN 15425 and EN 16254;
b)   for assessing the suitability and quality of adhesives for load-bearing timber structures;
c)   for assessing the effect on the bond strength resulting from constant load at different climate conditions.
This method is intended primarily to obtain performance data for the classification of adhesives for load bearing timber structures according to their suitability for use in defined climatic environments.
This method is not intended to provide data for structural design, and does not necessarily represent the performance of the bonded member in service.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 302-4:2023(Main)
Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength
EN 302-4:2023

This document specifies a method for determining the influence of shear strength in crosswise gluing by wood shrinkage under drying conditions.
It is suitable for the following applications:
a)   for assessing the compliance of adhesives with EN 301, EN 15425, EN 16254, EN 17334 and EN 17418;
b)   for assessing the suitability and quality of adhesives for load-bearing timber structures;
c)   for determining if the adhesive is capable of withstanding stresses due to wood shrinkage without unacceptable loss of strength.
This test is intended primarily to obtain performance data for the classification of adhesives for load-bearing timber structures according to their suitability for use in defined climatic environments. This test is carried out on Norway spruce (Picea abies L.).
This method is not intended for use to provide numerical design data and does not necessarily represent the performance of the bonded member in service.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15425:2023(Main)
Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements
EN 15425:2023

This document establishes a classification for one component polyurethane (PUR) adhesives according to their suitability for use in load-bearing timber products in defined climatic exposure conditions; it specifies performance requirements for such adhesives for the factory manufacture or factory like manufacturing of load-bearing timber products only.
It also classifies "adhesive lines" where all the products within the line have almost identical physical/chemical properties and gluing performance, but different reactivity.
This document only specifies the performance of adhesives for use in an environment corresponding to the defined conditions.
The performance requirements of this document apply to the adhesives only, not to the manufactured timber products. This document does not cover the performance of adhesives for on-site gluing (except for factory-like conditions) nor the production of wood-based panels, except solid wood panels, or modified and stabilized wood with considerably reduced swelling and shrinkage properties, e.g. such as acetylated wood, heat treated wood and polymer impregnated wood.
This document is primarily intended for the use of adhesive manufacturers and for the use in timber products bonded with adhesives, to assess or control the quality of adhesives. The requirements apply to the type testing of the adhesives. Production control activities are outside the scope of this document.
Adhesives meeting the requirements of this document are adequate for use in load-bearing timber products, provided that the bonding process has been carried out according to an appropriate product standard.
This document does not address the classification and use of adhesives in combination with the spraying of water before or during the bonding process; see informative Annex C of this document.
This does neither allow nor forbid the use of adhesives in combination with spraying of water.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 302-1:2023(Main)
Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength
EN 302-1:2023

This document specifies a method for determining the shear strength of adhesive bonds in close contact glue line and thick glue line.
It is suitable for the following applications:
a)   for assessing the compliance of adhesives with EN 301, EN 15425, EN 16254, EN 17334 and EN 17418;
b)   for assessing the suitability and quality of adhesives for load-bearing timber structures.
This test is intended primarily to obtain performance data for the classification of adhesives for load-bearing timber structures according to their suitability for use in defined climatic environments.
This method is not intended for use to provide for structural design and does not necessarily represent the performance of the bonded member in service.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 302-7:2023(Main)
Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
EN 302-7:2023

This document specifies a method for determining the working life for adhesives mixed with hardener for load-bearing timber structures, by a viscosity test.
This method is not suitable for determining the working life of a multi-component adhesive whose actual working life is very short.
This document is only intended for obtaining a reliable basis for comparison between adhesives. The method gives results which cannot be applied to the safe manufacture of timber structures without modifications for the influences of factory temperature and relative air humidity.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16254:2023(Main)
Adhesives - Emulsion polymer isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements
EN 16254:2023

This document establishes a classification for emulsion polymerised isocyanate (EPI) adhesives according to their suitability for use in load-bearing timber products in defined climatic exposure conditions, and specifies performance requirements for such adhesives for the industrial manufacture of load-bearing timber products only.
The performance requirements of this document apply to the adhesives only, not to the timber products. This document does not cover the performance of adhesives for on-site gluing (except for factory-like conditions) nor the production of wood-based panels, except solid wood panels, or modified and stabilized wood with considerably reduced swelling and shrinkage properties, e.g. such as acetylated wood, heat treated wood and polymer impregnated wood.
This document is primarily intended for the use of adhesive manufacturers and for the use in timber products bonded with adhesives, to assess or control the quality of adhesives. This document only specifies the performance of an adhesive for use in an environment corresponding to the defined conditions.
Such an adhesive meeting the requirements of this document for its type is adequate for use in load-bearing timber products, provided that the bonding process has been carried out according to an appropriate product standard.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 301:2023(Main)
Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
EN 301:2023

This document establishes a classification for phenolic and aminoplastic polycondensation adhesives according to their suitability for use for load-bearing timber structures in defined climatic exposure conditions, and specifies performance requirements for such adhesives for the factory manufacture or factory-like manufacturing conditions of load-bearing timber structures only.
This document only specifies the performance of an adhesive for use in an environment corresponding to the defined conditions.
The performance requirements of this document apply to the adhesive only, not to the timber structure. This document does not cover the performance of adhesives for on-site gluing (except for factory-like conditions) nor the production of wood-based panels, except solid wood panels, or modified and stabilized wood with considerably reduced swelling and shrinkage properties, e.g. such as acetylated wood, heat treated wood and polymer impregnated wood.
This document is primarily intended for the use of adhesive manufacturers and for the use in timber structures bonded with adhesives, to assess or control the quality of adhesives. The requirements apply to the type testing of the adhesives. Production control activities are outside the scope of this document.
Adhesives meeting the requirements of this document are adequate for use in a load-bearing timber structures, provided that the bonding process has been carried out according to an appropriate product standard.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day