Structural adhesives - Determination of the pot life (working life) of multi-component adhesives (ISO 10364:2024)

This document specifies methods for determining the pot life of multi-part adhesives, in order to be able to determine whether the pot life conforms to the minimum specified working life required of an adhesive.
The different methods described in this document to measure the property do not necessarily provide identical results.
The test methods described are suitable for assessing all multi–part adhesives, and especially epoxy based and polyurethane based adhesives, but they are not suitable for some acrylic-based adhesives.
NOTE 1       Some of the methods described in this document can also be suitable for determination of working life of one-part adhesives that react to humidity (e.g. PUR prepolymers).
NOTE 2       This document can also be used for assessing non-structural adhesives.

Strukturklebstoffe - Bestimmung der Topfzeit (Verarbeitungszeit) von Mehrkomponentenklebstoffen (ISO 10364:2024)

Dieses Dokument legt Verfahren für die Bestimmung der Topfzeit von Mehrkomponentenklebstoffen fest, um feststellen zu können, ob die Topfzeit der bei einem Klebstoff erforderlichen festgelegten mindesten Verarbeitungszeit entspricht.
Die verschiedenen in diesem Dokument beschriebenen Verfahren zur Messung dieser Eigenschaft liefern nicht zwingend identische Ergebnisse.
Die beschriebenen Prüfverfahren sind zur Bestimmung aller Mehrkomponentenklebstoffe geeignet, insbesondere für Klebstoffe auf Epoxid- und Polyurethanbasis, jedoch nicht für einige Acrylklebstoffe.
ANMERKUNG 1   Einige der in diesem Dokument beschriebenen Verfahren können auch zur Bestimmung der Verarbeitungszeit von Einkomponentenklebstoffen, die mit Feuchtigkeit reagieren (z. B. PUR-Prepolymere), geeignet sein.
ANMERKUNG 2   Dieses Dokument kann auch zur Bestimmung von Nicht-Strukturklebstoffen verwendet werden.
SICHERHEITSHINWEIS — Personen, die dieses Dokument anwenden, sollten, sofern zutreffend, mit der üblichen Laborpraxis vertraut sein. Dieses Dokument erhebt nicht den Anspruch, alle im Zusammenhang mit ihrer Anwendung gegebenenfalls vorhandenen Sicherheitsrisiken zu berücksichtigen. Es liegt in der Verantwortung des Anwenders, geeignete Vorkehrungen für den Arbeits- und Gesundheitsschutz zu treffen und vor der Anwendung sämtliche gesetzlichen Bestimmungen zu ermitteln.

Adhésifs structuraux - Détermination de la vie en pot (durée d'utilisation) des adhésifs multicomposants (ISO 10364:2024)

Konstrukcijska lepila - Ugotavljanje roka uporabnosti večkomponentnih lepil (ISO 10364:2024)

General Information

Status
Not Published
Public Enquiry End Date
06-Feb-2023
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
16-Feb-2024
Due Date
22-Apr-2024

Relations

Buy Standard

Draft
prEN ISO 10364:2023 - BARVE
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 10364:2023
01-januar-2023
Konstrukcijska lepila - Ugotavljanje roka uporabnosti večkomponentnih lepil
(ISO/DIS 10364:2022)
Structural adhesives - Determination of the pot life (working life) of multi-component
adhesives (ISO/DIS 10364:2022)
Strukturklebstoffe - Bestimmung der Topfzeit (Verarbeitungszeit) von
Mehrkomponentenklebstoffen (ISO/DIS 10364:2022)
Adhésifs structuraux - Détermination de la vie en pot (durée d'utilisation) des adhésifs
multicomposants (ISO/DIS 10364:2022)
Ta slovenski standard je istoveten z: prEN ISO 10364
ICS:
83.180 Lepila Adhesives
oSIST prEN ISO 10364:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 10364:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 10364:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 10364
ISO/TC 61/SC 11 Secretariat: JISC
Voting begins on: Voting terminates on:
2022-11-17 2023-02-09
Structural adhesives — Determination of the pot life
(working life) of multi-component adhesives
Adhésifs structuraux — Détermination de la vie en pot (durée d'utilisation) des adhésifs multicomposants
ICS: 83.180
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 10364:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 3 ----------------------
oSIST prEN ISO 10364:2023
ISO/DIS 10364:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 10364
ISO/TC 61/SC 11 Secretariat: JISC
Voting begins on: Voting terminates on:

Structural adhesives — Determination of the pot life
(working life) of multi-component adhesives
Adhésifs structuraux — Détermination de la vie en pot (durée d'utilisation) des adhésifs multicomposants
ICS: 83.180
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 10364:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 4 ----------------------
oSIST prEN ISO 10364:2023
ISO/DIS 10364:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.