oSIST prEN ISO 374-5:2022

Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks (ISO/DIS 374-5:2022)

ISO 374-5:2016 specifies the requirements and test methods for protective gloves intended to protect the user against micro-organisms.
NOTE If other protection features is to be needed, e.g. chemical risks, mechanical risks, thermal risks, electrostatic dissipation etc., the appropriate specific performance standard is to be used in addition. Further information on protective gloves standards can be found in the EN 420.

Schutzhandschuhe gegen gefährliche Chemikalien und Mikroorganismen - Teil 5: Terminologie und Leistungsanforderungen für Risiken durch Mikroorganismen (ISO/DIS 374‑5:2022)

Gants de protection contre les produits chimiques dangereux et les micro-organismes - Partie 5: Terminologie et exigences de performance pour les risques par les micro-organismes (ISO/DIS 374-5:2022)

L'ISO 374-5:2016 spécifie une méthode d'essai permettant de déterminer la résistance à la pénétration des gants qui protègent contre les micro-organismes.
NOTE Si d'autres fonctions de protection doivent être couvertes, par exemple les risques mécaniques, les risques thermiques, la dissipation électrostatique, etc., il convient que la norme de performance spécifique appropriée soit utilisée en complément. Des informations supplémentaires sur les normes concernant les gants de protection peuvent se trouver dans l'EN 420.

Varovalne rokavice za zaščito pred nevarnimi kemikalijami in mikroorganizmi - 5. del: Izrazje in zahtevane lastnosti za zaščito pred tveganji, povezanimi z mikroorganizmi (ISO/DIS 374-5:2022)

General Information

• Status: Not Published
• Public Enquiry End Date: 30-Dec-2022
• ICS: 13.340.40 - Hand and arm protection
• Technical Committee: OVP - Personal protecting equipment
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 24-Oct-2022
• Due Date: 13-Mar-2023
• Completion Date: 19-Dec-2022
• Directive: 2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
• Mandate: M/571 - COMMISSION IMPLEMENTING DECISION of 19.11.2020 on a standardisation request to the European Committee for Standardization and the European Committee for Electrotechnical Standardization as regards personal protective equipment in support of Regulation (EU) 2016/425 of the European Parliament and of the Council
• Ref Project: prEN ISO 374-5 - Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks (ISO/DIS 374-5:2022)

Relations

• Revised: SIST EN ISO 374-5:2017 - Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016)
• Effective Date: 23-Jun-2021
• Revised: SIST EN ISO 374-5:2017 - Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016)
• Effective Date: 18-Jan-2023
• Revised: SIST EN ISO 374-5:2017 - Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016)
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 374-5:2022
01-december-2022
Varovalne rokavice za zaščito pred nevarnimi kemikalijami in mikroorganizmi - 5.
del: Izrazje in zahtevane lastnosti za zaščito pred tveganji, povezanimi z
mikroorganizmi (ISO/DIS 374-5:2022)
Protective gloves against dangerous chemicals and micro-organisms - Part 5:
Terminology and performance requirements for micro-organisms risks (ISO/DIS 374-
5:2022)
Schutzhandschuhe gegen gefährliche Chemikalien und Mikroorganismen - Teil 5:
Terminologie und Leistungsanforderungen für Risiken durch Mikroorganismen (ISO/DIS
374‑5:2022)
Gants de protection contre les produits chimiques dangereux et les micro-organismes -
Partie 5: Terminologie et exigences de performance pour les risques par les micro-
organismes (ISO/DIS 374-5:2022)
Ta slovenski standard je istoveten z: prEN ISO 374-5
ICS:
13.340.40 Varovanje dlani in rok Hand and arm protection
oSIST prEN ISO 374-5:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 374-5:2022

---------------------- Page: 2 ----------------------
oSIST prEN ISO 374-5:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 374-5
ISO/TC 94/SC 13 Secretariat: SNV
Voting begins on: Voting terminates on:
2022-10-12 2023-01-04
Protective gloves against dangerous chemicals and micro-
organisms —
Part 5:
Terminology and performance requirements for micro-
organisms risks
Gants de protection contre les produits chimiques dangereux et les micro-organismes —
Partie 5: Terminologie et exigences de performance pour les risques contre les micro-organismes
ICS: 01.040.13; 13.340.40
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 374-5:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 3 ----------------------
oSIST prEN ISO 374-5:2022
ISO/DIS 374-5:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 374-5
ISO/TC 94/SC 13 Secretariat: SNV
Voting begins on: Voting terminates on:

Protective gloves against dangerous chemicals and micro-
organisms —
Part 5:
Terminology and performance requirements for micro-
organisms risks
Gants de protection contre les produits chimiques dangereux et les micro-organismes —
Partie 5: Terminologie et exigences de performance pour les risques contre les micro-organismes
ICS: 01.040.13; 13.340.40
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 374-5:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 4 ----------------------
oSIST prEN ISO 374-5:2022
ISO/DIS 374-5:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Sampling . 2
4.1 Sampling for viral penetration testing . 2
4.2 Sampling for bacteria/fungi penetration testing . 3
5 Performance requirement.3
5.1 General requirements . 3
5.2 Dexterity . 3
5.3 Penetration . 3
5.4 Protection against viruses . 3
5.5 Requirements for different protection types of gloves . 3
6 Marking . . 3
6.1 Marking of gloves protecting against bacteria and fungi . 4
6.2 Marking of gloves protecting against viruses, bacteria and fungi . 4
7 Information supplied by the manufacturer . 4
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Regulation (EU) 2016/425 aimed to be covered .6
iii
© ISO 2022 – All rights reserved

---------------------- Page: 5 ----------------------
oSIST prEN ISO 374-5:2022
ISO/DIS 374-5:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.
ISO 374-5 was prepared by the European Committee for Standardization (CEN) in collaboration with
ISO Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee
SC 13 Protective clothing in accordance with the Agreement on technical cooperation between ISO and
CEN (Vienna Agreement).
ISO 374 consists of the following parts, under the general title Protective gloves against dangerous
chemicals and
...