Automatic electrical controls for household and similar use -- Part 2-12: Particular requirements for electrically operated door locks

This clause of Part 1 is applicable except as follows: In general, this part of IEC 60730 applies to electrically operated door locks intended to prevent the opening of doors in equipment for household and similar use. This standard applies to the inherent safety, to the operating values, operating sequences where such are associated with equipment protection, and to the testing of door locks used in, or in association with, household and similar equipment. This standard is also applicable to door locks for appliances within the scope of IEC 60335-1. Throughout this standard, the word "equipment" means "appliance" and "equipment". Throughout this standard, the word "door" means "door, cover or lid". The words "door lock" mean "electrically operated door lock". This standard does not apply to door locks designed exclusively for industrial applications. This standard is also applicable to individual door locks utilized as part of a control system or door locks which are mechanically integral with multi-functional controls having non-electrical outputs. Door locks for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This standard applies to door locks with electrical circuits and control circuits which are, for example, operated by bimetals, magnet coils, memory metals, pressure elements, temperature-sensitive expansion elements or electronic elements.

Automatische elektrische Regel- und Steuergeräte für den Hausgebrauch und ähnliche Anwendungen -- Teil 2-12: Besondere Anforderungen an elektrisch betriebene Türverriegelungen

Dispositifs de commande électrique automatiques à usage domestique et analogue -- Partie 2-12: Règles particulières pour les serrures électriques de portes

De façon générale, la présente partie de la EN 60730 s'applique aux serrures électriques de portes prévues pour empêcher l'ouverture des portes de matériels électrodomestiques et analogues.

Avtomatske električne krmilne naprave za uporabo v gospodinjstvu in za podobno uporabo – 2-12. del: Posebne zahteve za električne zapore vrat (IEC 60730-2-12:2005, spremenjen)

General Information

Status
Withdrawn
Publication Date
30-Nov-2006
Withdrawal Date
16-May-2022
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
17-May-2022
Due Date
09-Jun-2022
Completion Date
17-May-2022

Relations

Buy Standard

Standard
EN 60730-2-12:2006
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

6/29(16., 6,67(1

67$1'$5'
GHFHPEHU
$YWRPDWVNHHOHNWULþQHNUPLOQHQDSUDYH]DXSRUDERYJRVSRGLQMVWYXLQ]D
SRGREQRXSRUDER±GHO3RVHEQH]DKWHYH]DHOHNWULþQH]DSRUHYUDW ,(&
VSUHPHQMHQ
$XWRPDWLFHOHFWULFDOFRQWUROVIRUKRXVHKROGDQGVLPLODUXVH3DUW3DUWLFXODU
UHTXLUHPHQWVIRUHOHFWULFDOO\RSHUDWHGGRRUORFNV ,(&PRGLILHG
,&6 5HIHUHQþQDãWHYLOND

6,67(1 HQ
!"#$%&’( )&!*+,%- .

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60730-2-12

NORME EUROPÉENNE
April 2006
EUROPÄISCHE NORM

ICS 97.120 Supersedes EN 60730-2-12:1993 + A1:1997 + A11:2005


English version


Automatic electrical controls for household and similar use
Part 2-12: Particular requirements for electrically operated door locks
(IEC 60730-2-12:2005, modified)


Dispositifs de commande électrique Automatische elektrische Regel-
automatiques à usage domestique und Steuergeräte für den Hausgebrauch
et analogue und ähnliche Anwendungen
Partie 2-12: Règles particulières Teil 2-12: Besondere Anforderungen an
pour les serrures électriques de portes elektrisch betriebene Türverriegelungen
(CEI 60730-2-12:2005, modifiée) (IEC 60730-2-12:2005, modifiziert)




This European Standard was approved by CENELEC on 2005-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any
other language made by translation under the responsibility of a CENELEC member into its own
language and notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60730-2-12:2006 E

---------------------- Page: 2 ----------------------

EN 60730-2-12:2006 – 2 –
Foreword
The text of document 72/672/FDIS, future edition 2 of IEC 60730-2-12, prepared by IEC TC 72,
Automatic controls for household use, was submitted to the IEC-CENELEC parallel vote. Together
with common modifications prepared by the Technical Committee CENELEC TC 72, Automatic
controls for household use, it was approved by CENELEC as EN 60730-2-12 on 2005-10-01.
This European Standard supersedes EN 60730-2-12:1993 and its amendments A1:1997 and
A11:2005.
It incorporates amended requirements for electronic controls in Annex H.
The following dates were fixed:

– latest date by which the EN has to be implemented

at national level by publication of an identical
(dop) 2006-11-01
national standard or by endorsement
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-10-01
This Part 2-12 is to be used in conjunction with EN 60730-1:2000, Automatic electrical controls for
household and similar use – Part 1: General requirements, and its amendments. Consideration may
be given to future editions of EN 60730-1.
This Part 2-12 supplements or modifies the corresponding clauses of EN 60730-1 so as to convert it
into the European Standard: Particular requirements for electrically operated door locks.
Where a particular clause or subclause of Part 1 is not mentioned in this Part 2-12, that clause or
subclause applies as far as is reasonable. Where this Part 2-12 states “addition”, “modification” or
“replacement”, the relevant text of Part 1 is to be adapted accordingly.
Where reference is made to other international or harmonized standards, the edition of that standard
quoted in Annex ZA of EN 60730-1 is applicable.
There are no special national conditions (snc) causing a deviation from this European Standard
other than those listed in Annex ZB of EN 60730-1.
There are no national deviations from this European Standard other than those listed in Annex ZC of
EN 60730-1.
In this standard
1) the following print types are used:
– requirements proper: in roman type;
– test specifications: in italic type;
– explanatory matter: in smaller roman type.
2) subclauses which are additional to those in Part 1 are numbered starting from 101.
_____________

---------------------- Page: 3 ----------------------

– 3 – EN 60730-2-12:2006
Endorsement notice
The text of the International Standard IEC 60730-2-12:2005 was approved by CENELEC as a
European Standard with agreed common modifications as given below.
COMMON MODIFICATIONS
Foreword Delete
17 Endurance
17.1.3.1 Delete the text between brackets in the second and the fourth indents.
17.7 Replace the title with the following new title:
17.7 Overvoltage test of automatic action at accelerated rate
17.7.1 Delete the text between brackets in the first paragraph.
17.7.7 Delete the "in some countries" note.
17.10 Replace the title with the following new title:
17.7 Overvoltage test of manual action at accelerated speed
17.10.4 Delete the "in some countries" note.
___________

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE
IEC



60730-2-12
INTERNATIONAL


Deuxième édition
STANDARD

Second edition

2005-08


Dispositifs de commande électrique automatiques
à usage domestique et analogue –
Partie 2-12:
Règles particulières pour les serrures
électriques de portes

Automatic electrical controls for
household and similar use –
Part 2-12:
Particular requirements for electrically
operated door locks

 IEC 2005 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
P
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

60730-2-12  IEC:2005 – 3 –
CONTENTS
FOREWORD.5

1 Scope and normative references.9
2 Definitions .11
3 General requirements .13
4 General notes on tests.13
5 Rating.13
6 Classification .13
7 Information .15
8 Protection against electric shock.15
9 Provision for protective earthing.15
10 Terminals and terminations.17
11 Constructional requirements .17
12 Moisture and dust resistance .17
13 Electric strength and insulation resistance.17
14 Heating.17
15 Manufacturing deviation and drift .17
16 Environmental stress .17
17 Endurance .17
18 Mechanical strength.23
19 Threaded parts and connections .23
20 Creepage distances, clearances and distances through solid insulation.23
21 Resistance to heat, fire and tracking .23
22 Resistance to corrosion .25
23 Electromagnetic compatibility (EMC) requirements – emission .25
24 Components .25
25 Normal operation .25
26 Electromagnetic compatibility (EMC) requirements – immunity .25
27 Abnormal operation.25
28 Guidance on the use of electronic disconnection .25

Annexes.27
Annex H (normative) Requirements for electronic controls .27

---------------------- Page: 6 ----------------------

60730-2-12  IEC:2005 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

AUTOMATIC ELECTRICAL CONTROLS
FOR HOUSEHOLD AND SIMILAR USE –

Part 2-12: Particular requirements for
electrically operated door locks


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60730-2-12 has been prepared by IEC technical committee 72:
Automatic controls for household use.
This second edition cancels and replaces the first edition published in 1993 and Amendment 1
(1995). This second edition constitutes a technical revision, which incorporates amended
requirements for electronic controls in Annex H
The text of this standard is based on the following documents:
FDIS Report on voting
72/672/FDIS 72/679/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

---------------------- Page: 7 ----------------------

60730-2-12  IEC:2005 – 7 –
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
This Part 2-12 is intended to be used in conjunction with IEC 60730-1. It was established on
the basis of the third edition of that standard (1999) and its amendment 1 (2003).
Consideration may be given to future editions of, or amendments to, IEC 60730-1.
This Part 2-12 supplements or modifies the corresponding clauses in IEC 60730-1 so as to
convert that publication into the IEC standard: Particular requirements for electrically operated
door locks.
Where this Part 2-12 states "addition", "modification" or "replacement", the relevant
requirement, test specification or explanatory matter in Part 1 should be adapted accordingly.
Where no change is necessary, this Part 2-12 indicates that the relevant clause or subclause
applies.
The list of other parts of the IEC 60730 series can be found on the IEC website.

In the development of a fully international standard it has been necessary to take into
consideration the differing requirements resulting from practical experience in various parts of
the world and to recognize the variation in national electrical systems and wiring rules.
The "in some countries" notes regarding differing national practice are contained in the following subclauses:
– 17.1.3.1
– 17.7
– 17.7.1
– 17.7.7
– 17.10
– 17.10.4

In this publication:
1) The following print types are used:
– requirements proper: in roman type;
– test specifications: in italic type;
– explanatory matter: in smaller roman type.
2) Subclauses or figures which are additional to those in Part 1 are numbered starting from 101.

The committee has decided that the contents of this publication will remain unchanged until the
maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.

---------------------- Page: 8 ----------------------

60730-2-12  IEC:2005 – 9 –
AUTOMATIC ELECTRICAL CONTROLS
FOR HOUSEHOLD AND SIMILAR USE –

Part 2-12: Particular requirements for
electrically operated door locks



1 Scope and normative references
This clause of Part 1 is applicable except as follows:
1.1 Replacement:
In general, this part of IEC 60730 applies to electrically operated door locks intended to prevent
the opening of doors in equipment for household and similar use.
1.1.1 Replacement:
This standard applies to the inherent safety, to the operating values, operating sequences
where such are associated with equipment protection, and to the testing of door locks used in,
or in association with, household and similar equipment.
This standard is also applicable to door locks for applianc
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.