Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 l

This European Standard specifies the characteristics and dimensions of nonremovable head (tight head) plastics drums with a nominal capacity of 210 l and 225 l.

Kunststofffässer - Spundfässer mit einem Nennvolumen von 210 l und 225 l

Dieses Dokument legt die Merkmale und Maße von Spundfässern aus Kunststoff mit einem Nennvolumen von 210 l und 225 l fest.

Fûts en matière plastique - Fûts à ouverture partielle d’une capacité nominale de 210 l et 225 l

La présente Norme européenne spécifie les caractéristiques et les dimensions des fûts en matières plastiques à ouverture partielle, d’une capacité nominale de 210 l et 225 l.

Plastični sodi - Sodi z nesnemljivim pokrovom (ozka odprtina) z nazivno prostornino 210 l in 225 l

Ta evropski standard opredeljuje lastnosti in dimenzije sodov z nesnemljivim pokrovom (ozka odprtina) z nazivno prostornino 210 l in 225 l.

General Information

Status
Published
Public Enquiry End Date
19-Jun-2008
Publication Date
15-Dec-2009
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
08-Dec-2009
Due Date
12-Feb-2010
Completion Date
16-Dec-2009

Relations

Buy Standard

Standard
EN 12707:2010
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.D]LYQRKunststofffässer - Spundfässer mit einem Nennvolumen von 210 l und 225 lFûts en matière plastique - Fûts à ouverture partielle d’une capacité nominale de 210 l et 225 lPlastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 l55.140Barrels. Drums. CanistersICS:Ta slovenski standard je istoveten z:EN 12707:2009SIST EN 12707:2010en,fr,de01-januar-2010SIST EN 12707:2010SLOVENSKI
STANDARDSIST EN 12707:20011DGRPHãþD



SIST EN 12707:2010



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12707July 2009ICS 55.140Supersedes EN 12707:1999
English VersionPlastics drums - Non-removable head (tight head) drums with anominal capacity of 210 l and 225 lFûts en matière plastique - Fûts à ouverture partielle d'unecapacité nominale de 210 l et 225 lKunststofffässer - Spundfässer mit einem Nennvolumenvon 210 l und 225 lThis European Standard was approved by CEN on 27 June 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12707:2009: ESIST EN 12707:2010



EN 12707:2009 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Requirements .54.1Dimensions .54.2Drum mass .54.3Material identification symbol .54.4Closures .54.5Materials .54.6Handling .54.7Stacking .54.8Draining .54.9Finish .65Designation .6Annex A (normative)
Capacity measurement method for non-removable head (tight head) plastics drums .8A.1Principle .8A.2Apparatus .8A.3Procedure for determination of total capacity .8A.4Procedure for determination of brimful capacity .9A.5Expression of results .9Annex B (normative)
Draining test method for non-removable head (tight head) plastics drums . 10B.1Principle . 10B.2Apparatus . 10B.3Determination of drainability using the top section of the drum (procedure A) . 10B.4Determination of drainability using a complete drum (procedure B) . 10B.5Expression of results . 11Bibliography . 12 SIST EN 12707:2010



EN 12707:2009 (E) 3 Foreword This document (EN 12707:2009) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at the latest by January 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12707:1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 12707:2010



EN 12707:2009 (E) 4 1 Scope This European Standard specifies the characteristics and dimensions of non-removable head (tight head) plastics drums with a nominal capacity of 210 l and 225 l. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 20848-3, Packaging -- Plastics drums -- Part 3: Plug/bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l (ISO 20848-3:2006) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 non-removable head (tight head) drum (TH) flat-ended or convex-ended
circular cross-section packaging with openings for filling and emptying in the head not exceeding 70 mm in diameter 3.2
nominal capacity (NC) capacity in litres which, by convention, is used to represent a class of drums of similar brimful capacities 3.3
brimful capacity (BC) volume of water in litres held by the drum when filled through the filling orifice to the point of overflowing NOTE Annex A specifies the method for measuring brimful capacity.
3.4
total capacity (TC)
volume of water in litres held by the drum when filled completely, i.e. following the removal of any air trapped in the drum NOTE Annex A specifies the method for measuring total capacity. 3.5
overall height (ho) height of the finished drum from the base to the highest point
NOTE See Figure 1. 3.6
overall diameter (do) maximum diameter of the drum, where relevant
NOTE
See Figure 1. 3.7
bung housing position (pb) distance from the centre of the bung housing to the outside of the drum body 50 mm vertically below the top edge of the top handling ring
SIST EN 12707:2010



EN 12707:2009 (E) 5 NOTE See Figure 1. 3.8 drum mass mass of the empty drum including all closures 4 Requirements 4.1 Dimensions The dimensions and tolerances of the drum shall be as listed in Table 1 and as shown in Figure 1. The measurements shall be conducted at ambient c
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.