Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables

Mineralisolierte Leitungen mit einer Bemessungsspannung bis 750 V -- Teil 1: Leitungen

Câbles à isolant minéral et leurs terminaisons de tension assignée ne dépassant pas 750 V -- Partie 1: Câbles

Kabli z mineralno izolacijo in njihovi priključki z naznačeno napetostjo, ki ne presega 750 V - 1. del: Kabli - Dopolnilo A1

General Information

Status
Published
Publication Date
13-Aug-2015
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-Apr-2015
Due Date
08-Jun-2015
Completion Date
14-Aug-2015

Relations

Buy Standard

Amendment
EN 60702-1:2002/A1:2015
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60702-1:2002/A1:2015
01-september-2015
.DEOL]PLQHUDOQRL]RODFLMRLQQMLKRYLSULNOMXþNL]QD]QDþHQRQDSHWRVWMRNLQH
SUHVHJD9GHO.DEOL'RSROQLOR$
Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V
- Part 1: Cables
Mineralisolierte Leitungen mit einer Bemessungsspannung bis 750 V -- Teil 1: Leitungen
Câbles à isolant minéral et leurs terminaisons de tension assignée ne dépassant pas
750 V -- Partie 1: Câbles
Ta slovenski standard je istoveten z: EN 60702-1:2002/A1:2015
ICS:
29.060.20 Kabli Cables
SIST EN 60702-1:2002/A1:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60702-1:2002/A1:2015

---------------------- Page: 2 ----------------------

SIST EN 60702-1:2002/A1:2015


EUROPEAN STANDARD EN 60702-1:2002/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2015
ICS 29.060.20

English Version
Mineral insulated cables and their terminations with a rated
voltage not exceeding 750 V -
Part 1: Cables
(IEC 60702-1:2002/A1:2015)
Câbles à isolant minéral et leurs terminaisons de tension Mineralisolierte Leitungen mit einer Bemessungsspannung
assignée ne dépassant pas 750 V - bis 750 V -
Partie 1: Câbles Teil 1: Leitungen
(IEC 60702-1:2002/A1:2015) (IEC 60702-1:2002/A1:2015)
This amendment A1 modifies the European Standard EN 60702-1:2002; it was approved by CENELEC on 2015-02-19. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60702-1:2002/A1:2015 E

---------------------- Page: 3 ----------------------

SIST EN 60702-1:2002/A1:2015
EN 60702-1:2002/A1:2015 - 2 -

Foreword
The text of document 20/1528/FDIS, future edition 3 of IEC 60702-1/A1, prepared by IEC TC 20, Electric
cables" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60702-
1:2002/A1:2015.
The following dates are fixed:
• latest date by which the document has (dop) 2015-11-19
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-02-19
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed
for Use within Certain Voltage Limits (LVD - 2006/95/EC).
Endorsement notice
The text of the International Standard IEC 60702-1:2002/A1:2015 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated :
Add the following new text to the Bibliography :
IEC 60702-2 NOTE Harmonised as EN 60702-2.

---------------------- Page: 4 ----------------------

SIST EN 60702-1:2002/A1:2015
- 3 - EN 60702-1:2002/A1:2015
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.

Replace the existing list of references with the following references:
Publication Year Title EN/HD Year
IEC 60227-1 -  Polyvinyl chloride insulated cables of rated - -
voltages up to and including 450/750 V --
Part 1: General requirements
IEC 60228 -  Conductors of insulated cables EN 60228 -
IEC 60331-1 -  Tests for electric cables under fire conditions - -
- Circuit integrity -
Part 1: Test method for fire with shock at a
temperature of at least 830 °C for cables of
rated voltage up to and including 0,6/1,0 kV
and with an overall diameter exceeding 20
mm
IEC 60331-2 -  Tests for electric cables under fire conditions - -
- Circuit integrity -
Part 2: Test method for fire with shock at a
temperature of at least 830 °C for cables of
rated voltage up to and including 0,6/1,0 kV
and with an overall diameter not exceeding
20 mm
IEC 60332-1-2 -  Tests on electric and optical fibre cables EN 60332-1-2 -
under fire conditions --
Part 1-2: Test for vertical flame propagation
for a single insulated wire or cable -
Procedure for 1 kW pre-mixed flame
IEC 60754-2 -  Test on gases evolved during combustion of EN 60754-2 -
materials from cables -
Part 2: Determination of acidity (by pH
measurement) and conductivity
IEC 60811-202 -  Electric and optical fibre cables - Test EN 60811-202 -
methods for non-metallic materials --
Part 202: General tests - Measurement of
thickness of non-metallic sheath
IEC 60811-506 -  Electric and optical fibre cables - Test EN 60811-506 -
methods for non-metallic materials --
Part 506: Mechanical tests - Impact test at
low temperature for insulations and sheaths

---------------------- Page: 5 ----------------------

SIST EN 60702-1:2002/A1:2015
EN 60702-1:2002/A1:2015 - 4 -
IEC 60811-509 -  Electric
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.