SIST EN 3238:2011

Aerospace series - Metallic materials - Test method - Shear test for wires and rivets

This standard specifies the requirements for shear testing rivet wire and rivets in metallic materials for aerospace applications.
It shall be applied when referred to in the EN technical specification or material standard unless otherwise specified on the drawing, order or inspection schedule.

Luft- und Raumfahrt - Metallische Werkstoffe - Prüfverfahren - Prüfung der Scherfestigkeit von Drähten und Nieten

Diese Norm legt die Anforderungen an die Prüfung der Scherfestigkeit von Nietdraht und Nieten bei
metallischen Werkstoffen zur Anwendung in der Luft- und Raumfahrt fest.
Sie ist anzuwenden, wenn auf sie in der Europäischen Technischen Spezifikation oder Werkstoffnorm
verwiesen wird, sofern auf der Konstruktionszeichnung, in der Bestellung oder in der Prüfanweisung nichts
anderes festgelegt ist.

Série aérospatiale - Matériaux métalliques - Méthodes d'essais - Essai de cisaillement pour fils et rivets

Aeronavtika - Kovinski materiali - Preskusne metode - Strižni preskus za žice in kovice

Ta standard določa zahteve za strižni preskus za žico za kovičenje in kovice v kovinskih materialih za uporabo v aeronavtiki.
Uporablja se, kadar se nanaša na tehnično specifikacijo EN ali standard za materiale, razen če je drugače določeno na risbi, naročilu ali urniku pregleda.

General Information

• Status: Published
• Publication Date: 03-Oct-2011
• ICS: 49.025.05 - Ferrous alloys in general
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 21-Sep-2011
• Due Date: 26-Nov-2011
• Completion Date: 04-Oct-2011
• Ref Project: EN 3238:2010 - Aerospace series - Metallic materials - Test method - Shear test for wires and rivets

Relations

• Revised: SIST EN 3228:2022 - Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
• Effective Date: 26-Jun-2019

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Kovinski materiali - Preskusne metode - Strižni preskus za žice in koviceLuft- und Raumfahrt - Metallische Werkstoffe - Prüfverfahren - Prüfung der Scherfestigkeit von Drähten und NietenSérie aérospatiale - Matériaux métalliques - Méthodes d'essais - Essai de cisaillement pour fils et rivetsAerospace series - Metallic materials - Test method - Shear test for wires and rivets49.025.05Železove zlitine na splošnoFerrous alloys in generalICS:Ta slovenski standard je istoveten z:EN 3238:2010SIST EN 3238:2011en,de01-november-2011SIST EN 3238:2011SLOVENSKI
STANDARD



SIST EN 3238:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3238
October 2010 ICS 49.030.99 English Version
Aerospace series - Metallic materials - Test method - Shear test for wires and rivets
Série aérospatiale - Matériaux métalliques - Méthodes d'essais - Essai de cisaillement pour fils et rivets
Luft- und Raumfahrt - Metallische Werkstoffe - Prüfverfahren - Prüfung der Scherfestigkeit von Drähten und Nieten This European Standard was approved by CEN on 5 May 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3238:2010: ESIST EN 3238:2011



EN 3238:2010 (E) 2 Contents Page Foreword .3Introduction .41 Scope .52 Normative references .5 Terms, .53 definitions, parameters and symbols .53.1 General terms .53.2 Other terms .53.2.1 Shear strength .53.2.2 Parameters and symbols .64 Health and safety .65 Principle .66 Testing requirements .66.1 Resources .66.1.1 Equipment/plant .66.1.2 Materials/reagents .86.1.3 Qualification of personnel .86.2 Test samples/test pieces – Test piece dimensions .86.3 Testing procedure.86.3.1 Temperature of test .86.3.2 Method of test .86.4 Expression of results .87 Test report .8 SIST EN 3238:2011



EN 3238:2010 (E) 3 Foreword This document (EN 3238:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the latest by April 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 3238:2011



EN 3238:2010 (E) 4 Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. SIST EN 3238:2011



EN 3238:2010 (E) 5 1 Scope This standard specifies the requirements for shear testing rivet wire and rivets in metallic materials for aerospace applications. It
...