SIST-TS CEN/TS 15359:2007
(Main)Solid recovered fuels - Specifications and classes
Solid recovered fuels - Specifications and classes
This Technical Specification specifies a classification system for SRFs and a template for the specification of their properties.
SRFs are produced from non-hazardous waste.
NOTE 1 Solid bio-fuels excluded from the Waste Incineration Directive (2000/76/EC) are not included in the scope of this Technical Specification. These are dealt with in CEN/TC 335 "Solid biofuels". Waste wood from demolition of buildings and civil engineering installations is, however, included in the scope.
NOTE 2 Untreated municipal solid waste is not included in the scope of this Technical Specification.
Feste Sekundärbrennstoffe - Spezifikationen und Klassen
Diese Technische Spezifikation legt ein Klassifizierungssystem für SRF und ein Formular für die Spezifikation
von deren Eigenschaften fest.
SRF werden aus nicht gefährlichen Abfällen hergestellt.
ANMERKUNG 1 Feste Biobrennstoffe, die aus der Richtlinie über die Verbrennung von Abfällen (2000/76/EG)
ausgeschlossen sind, fallen nicht in den Anwendungsbereich dieser Technischen Spezifikation. Sie gehören zum
Anwendungsbereich von CEN/TC 335 -Feste Biobrennstoffe-. Gebrauchtholz aus dem Abriss von Gebäuden oder
sonstigen Bauwerken sind jedoch im Anwendungsbereich enthalten.
ANMERKUNG 2 Unbehandelter Siedlungsabfall fällt nicht in den Anwendungsbereich dieser Technischen Spezifi-kation.
Combustibles solides de récupération - Spécification et classes
La présente Spécification technique spécifie un systeme de classification des CSR ainsi qu'un modele de
spécification de leurs propriétés.
Les CSR sont produits a partir de déchets non dangereux.
NOTE 1 Les biocombustibles solides exclus de la Directive sur l'incinération des déchets (2000/76/CE) n'entrent pas
dans le domaine d'application de la présente Spécification technique. Ils sont traités par le CEN/TC 335
« Biocombustibles solides ». Les déchets de bois issus de la démolition de bâtiments et d'installations de génie civil sont,
quant a eux, inclus dans le domaine d'application.
NOTE 2 Les déchets solides municipaux non traités sont exclus du domaine d'application de la présente Spécification
technique.
Trdno alternativno gorivo - Specifikacije in razredi
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 15359:2007
01-marec-2007
Trdno alternativno gorivo - Specifikacije in razredi
Solid recovered fuels - Specifications and classes
Feste Sekundärbrennstoffe - Spezifikationen und Klassen
Combustibles solides de récupération - Spécification et classes
Ta slovenski standard je istoveten z: CEN/TS 15359:2006
ICS:
75.160.10 Trda goriva Solid fuels
SIST-TS CEN/TS 15359:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
TECHNICAL SPECIFICATION
CEN/TS 15359
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
May 2006
ICS 75.160.10
English Version
Solid recovered fuels - Specifications and classes
Combustibles solides de récupération - Spécification et Feste Sekundärbrennstoffe - Spezifikationen und Klassen
classes
This Technical Specification (CEN/TS) was approved by CEN on 21 February 2006 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15359:2006: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
CEN/TS 15359:2006 (E)
Contents Page
Foreword .3
Introduction.4
1 Scope.5
2 Normative references.5
3 Terms and definitions .6
4 Symbols and abbreviations.8
5 Principles.8
6 Requirements and declaration of conformity.8
7 Classification.9
8 Compliance rules.10
8.1 Compliance rules for classification.10
8.2 Compliance rules for specification.11
9 Specification.12
9.1 General.12
9.2 Properties obligatory to specify.12
9.3 Properties voluntary to specify.13
Annex A (normative) Template for the specification of solid recovered fuels.14
Annex B (informative) Fuel preparation.17
)
Annex C (informative) Template for declaration of conformity .18
Bibliography.19
2
---------------------- Page: 3 ----------------------
CEN/TS 15359:2006 (E)
Foreword
This Technical Specification (CEN/TS 15359:2006) has been prepared by Technical Committee
CEN/TC 343 “Solid recovered fuels”, the secretariat of which is held by SFS.
The scope for this Technical Specification is based on the mandate M/325 given by the European
Commission to CEN on 2002-08-26.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to announce this CEN Technical Specification: Austria, Belgium, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
3
---------------------- Page: 4 ----------------------
CEN/TS 15359:2006 (E)
Introduction
The objective of this Technical Specification is to provide unambiguous and clear classification and
specification principles for Solid Recovered Fuels (SRFs). The Technical Specification aims at serving
as a tool to enable efficient trading of SRFs, promoting their acceptability on the fuel market and
increasing the public trust. The Technical Specification will facilitate a good understanding between
seller and buyer, facilitate purchase, transborder movements, use and supervision as well as a good
communication with equipment manufacturers. It will also facilitate authority permission procedures
and ease the reporting on the use of fuels from renewable energy sources and on other environmental
issues.
)
1
SRFs are produced from non hazardous waste. The input waste can be production specific waste,
municipal solid waste, industrial waste, commercial waste, construction and demolition waste, sewage
sludge etc. It is thus obvious that SRFs are a heterogeneous group of fuels. A well defined system for
classification and specification is therefore of great importance to reach the above mentioned
objectives and intentions.
This Technical Specification covers all types of SRFs and will thus have a wide field of application. It
supports the objectives and implementation of the EU waste hierarchy as defined in article 3.1 of the
waste framework directive 75/442 modified by the directive 91/156.
This Technical Specification describes the compliance rules which a SRF has to meet to be classified
according to the classification system. It also describes how the supplier can establish a declaration of
conformity to the different Technical Specifications for SRFs (see Clause 2).
Figure 1 illustrates a simplified flow chain for SRFs, from input of waste to end use of SRFs. This
Technical Specification has an interface to all the stages in the chain, but SRF classification and
specification are applicable at the point of delivery as shown in the figure. Requirements for how the
input waste is collected and how to use the fuel are not part of this Technical Specification.
)
1
Hazardous waste is defined in the Directive on hazardous waste (91/689/EEC) and its amendments, and are
elucidated and exemplified in the waste list ((Commission decision 2000/532) and its amendments, in particular
2001/118/EC).
4
---------------------- Page: 5 ----------------------
CEN/TS 15359:2006 (E)
Figure 1 — Solid recovered fuels chain — The Technical Specification on specification and
classes is applicable at the point of delivery
1 Scope
This Technical Specification specifies a classification system for SRFs and a template for the
specification of their properties.
SRFs are produced from non-hazardous waste.
NOTE 1 Solid bio-fuels excluded from the Waste Incineration Directive (2000/76/EC) are not included in the
scope of this Technical Specification. These are dealt with in CEN/TC 335 “Solid biofuels”. Waste wood from
demolition of buildings and civil engineering installations is, however, included in the scope.
NOTE 2 Untreated municipal solid waste is not included in the scope of this Technical Specification.
2 Normative references
The following referenced documents are indispensable for the application of this Technical
Specification. For dated references, only the edition cited applies. For undated references, the latest
edition of the referenced document (including any amendments) applies.
CEN/TS 15357:2006, Solid recovered fuels — Terminology, definitions and descriptions
prCEN/TS 15442, Solid recovered fuels — Methods for sampling
prCEN/TS 15443, Solid recovered fuels — Methods for laboratory sample preparation
prCEN/TS 15400, Solid recovered fuels — Methods for the determination of calorific values
prCEN/TS 15414-1, Solid recovered fuels —Determination of moisture content using the oven dry
method — Part 1: Determination of total moisture by a reference method
prCEN/TS 15414-2, Solid recovered fuels —Determination of moisture content using the oven dry
method — Part 2: Determination of total moisture by a simplified method
5
---------------------- Page: 6 ----------------------
CEN/TS 15359:2006 (E)
prCEN/TS 15414-3, Solid recovered fuels —Determination of moisture content using the oven dry
method — Part 3: Moisture in general analysis sample
prCEN/TS 15403, Solid recovered fuels — Methods for the determination of ash content
prCEN/TS 15415, Solid recovered fuels —Determination of particle size and particle size distribution
by screen method
prCEN/TS 15408, Solid recovered fuels — Methods for the determination of sulphur (S), chlorine (Cl),
fluorine (F) and bromine (Br) content
prCEN/TS 15411, Solid recovered fuels — Methods for the determination of the content of trace
elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
3 Terms and definitions
For the purpose of this Technical Specification, the terms and definitions given in
CEN/TS 15357:2006 and the following apply.
NOTE The terms and definitions 3.1 to 3.9 are identical with the ones given in
CEN/TS 15357:2006.
3.1
classification of solid recovered fuel
grouping of solid recovered fuels into classes
NOTE The classes are defined by boundary values for chosen fuel characteristics to be used for trading as
well as for information of permitting authorities and other interested parties.
3.2
composition of solid recovered fuel
break down of solid recovered fuels by types of contained materials, e.g. wood, paper, board, textiles,
plastics, rubber
3.3
delivery agreement
contract for solid recovered fuels trade, which specifies e.g. origin, quality and quantity of the fuel, as
well as delivery terms
3.4
lot
defined quantity of solid recovered fuel for which the quality is to be determined
NOTE Adapted from CEN/TS 14588:2003 [8].
3.5
net calorific value
calculated value of the energy of combustion for unit mass of a solid recovered fuel burned in oxygen
in calorimetric bomb under such conditions that all the water remains as water vapour at 0,1 MPa
NOTE Old term is lower heating value.
3.6
point of delivery
location specified in the delivery agreement, at which the proprietary rights of and responsibility for a
solid recovered fuel are transferred from one organisation to an other
6
---------------------- Page: 7 ----------------------
CEN/TS 15359:2006 (E)
3.7
solid recovered fuel
solid fuel prepared from non-hazardous waste to be utilised for energy recovery in incineration or co-
incineration plants, and meeting the classification and specification requirements laid down in CEN/TS
15359
NOTE "Prepared" here means processed, homogenised and up-graded to a quality that can be traded
amongst producers and users.
3.8
specification
document stating requirements
[EN ISO 9000:2005] [9]
3.9
specification of solid recovered fuels
specification for the properties characterising a solid recovered fuel
NOTE A template for such specification is given in Annex A of CEN/TS 15359.
3.10
supplier
organisation or person that provides a product
7
---------------------- Page: 8 ----------------------
CEN/TS 15359:2006 (E)
4 Symbols and abbreviations
The symbols and abbreviations used in this Technical Specification comply with the SI system of units
as far as possible.
Item Symbol Abbreviation
net calorific value q NCV
p,net
gross calorific value q GCV
V,gr
as received ar
dry basis d
particle diameter d
5 Principles
The classification system is based on three important parameters, referred to the main SRFs
properties: an economical parameter (net calorific value), a technical parameter (chlorine content) and
an environmental parameter (mercury content). The parameters are chosen to give a stakeholder an
immediate but simplified picture of the fuel in question.
Only fuels derived from non hazardous waste that meet the SRFs standards can be classified as
SRFs.
The classification itself is not enough for an intending user. A user has to have a more detailed
description of the fuel. Relevant fuel properties are thus to be further specified. Some of the fuel
properties are so important that they are obligatory to specify whereas others can be recorded
voluntarily, e.g. upon request of the user.
It is important that SRFs meet specified quality requirements which are to be determined on a defined
lot size by a minimum number of measurements.
6 Requirements and declaration of conformity
In conformity with this Technical Specification, SRFs shall comply with the following requirements:
a) SRF shall be classified according to the system in Clause 7.
b) SRF shall meet quality requirements according to given compliance rules in Clause 8.
c) SRF properties shall be specified according to Clause 9.
The producer/supplier shall give a declaration of conformity to this Technical Specification. The record
shall be kept available for inspection. A model template for the declaration is given in Annex C.
NOTE General criteria for a supplier’s declaration is given in EN ISO/IEC 17050-1:2004 and EN ISO/IEC
17050-2:2004.
8
---------------------- Page: 9 ----------------------
CEN/TS 15359:2006 (E)
7 Classification
The classification system (Table 1) for SRFs is based on limit values for three important fuel properties.
These are:
a) the mean value for net calorific value (ar);
b) the mean value for chlorine content (d);
th
c) the median and 80 percentile values for mercury content (ar).
Each property is divided into 5 classes with limit values. The SRF shall be assigned a class number
from 1 to 5 for each property. A combination of the class numbers makes up the class code (see
example below). The parameters are of equal importance and thus no single class number determines
the code.
The class code shall be included in the specification as described in Clause 9.
Due to the statistical distribution pattern of the properties the values shall be presented as:
- net calorific value (NCV) mean (arithmetic);
- chlorine content (Cl) mean (arithmetic);
th
- mercury content (Hg) median and 80 percentile.
th
The highest of the two statistical values (median and 80 percentile) in a Hg data set determines the
th
class (a SRF with a median value of 0,03 and a 80 percentile value of 0,07 belongs to Hg class 3).
For NCV, Cl and Hg the test methods in the corresponding prCEN/TS shall be used.
th
NOTE 1 80 percentile is the value on or below which 80 % of the observations fall.
NOTE 2 For details on statistics see CEN Report prCEN/TR 15508 ”Key properties of solid recovered fuels to
be used for establishing a classification system”.
NOTE 3 The averages and percentiles are determined on the quantity of SRF as specified in Clause 8.
NOTE 4 The classes have been determined as a tool for identifying and pre-selecting SRF. However, the
performances of the plant where a SRF is used are depending on the properties of the SRF and more significantly
on the design and operating conditions of such a plant.
9
---------------------- Page: 10 ----------------------
CEN/TS 15359:2006 (E)
Table 1 — Classification system for solid recovered fuels
Classification Statistical Classes
Unit
measure
property
1 2 3 4 5
Net calorific Mean MJ/kg (ar) ≥ 25 ≥ 20 ≥ 15 ≥ 10
≥ 3
value (NCV)
Classification Statistical Classes
Unit
measure
property 1 2 3 4 5
Chlorine (Cl) Mean % (d)
≤ 0,2 ≤ 0,6 ≤ 1,0 ≤ 1,5 ≤ 3
Classification Statistical Classes
Unit
measure
property 1 2 3 4 5
Mercury (Hg) Median mg/MJ (ar) ≤ 0,03
≤ 0,02 ≤ 0,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.