oSIST prEN 6118:2024

Aerospace series - Pure aluminium IVD coating for fasteners

This document defines the characteristics and the tests required to qualify and control lots of high purity (≥ 99 %) aluminium coatings applied by ion-vapor deposition (IVD) on fasteners.

Luft- und Raumfahrt - Verfahrensspezifikation - Aluminiumschutz für Verbindungselemente

Luft- und Raumfahrt - Reinaluminiumbeschichtungen mittels IVD für Verbindungselemente

Série aérospatiale - Revêtements IVD d’aluminium purs pour fixations

Aeronavtika - Premaz IVD iz čistega aluminija za pritrdilne elemente

General Information

• Status: Not Published
• Public Enquiry End Date: 05-May-2024
• ICS: 49.025.20 - Aluminium
• ICS: 49.040 - Coatings and related processes used in aerospace industry
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 24-Jan-2024
• Due Date: 12-Jun-2024
• Ref Project: prEN 6118 - Aerospace series - Pure aluminium IVD coating for fasteners

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 6118:2024
01-maj-2024
Aeronavtika - Premaz IVD iz čistega aluminija za pritrdilne elemente
Aerospace series - Pure aluminium IVD coating for fasteners
Luft- und Raumfahrt - Verfahrensspezifikation - Aluminiumschutz für
Verbindungselemente
Série aérospatiale - Revêtements IVD d’aluminium purs pour fixations
Ta slovenski standard je istoveten z: prEN 6118
ICS:
49.025.20 Aluminij Aluminium
49.040 Prevleke in z njimi povezani Coatings and related
postopki, ki se uporabljajo v processes used in aerospace
letalski in vesoljski industriji industry
oSIST prEN 6118:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 6118:2024

---------------------- Page: 2 ----------------------
oSIST prEN 6118:2024


DRAFT
EUROPEAN STANDARD
prEN 6118
NORME EUROPÉENNE

EUROPÄISCHE NORM

January 2024
ICS 49.040
English Version

Aerospace series - Pure aluminium IVD coating for
fasteners
Série aérospatiale - Revêtements IVD d'aluminium purs Luft- und Raumfahrt - Verfahrensspezifikation -
pour fixations Aluminiumschutz für Verbindungselemente
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 6118:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 6118:2024
prEN 6118:2024 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Technical requirements . 5
5 Process description . 5
5.1 General. 5
5.2 Pre-processing . 6
5.2.1 Surface preparation . 6
5.2.2 Plasma treatment . 6
5.3 Coating deposition . 6
5.4 Post-processing .
...