SIST EN 61969-1:2002

Mechanical structures for electronic equipment - Outdoor enclosures -- Part 1: Design guidelines

Gives guidelines for the design of outdoor enclosures and is applicable over a wide field of mechanical, electromechanical and electronic equipment and its installation where a modular design is used. Provides an overview of specifications for enclosures focused on requirements for outdoor applications at non-weather-protected locations.

Mechanische Bauweisen für elektronische Einrichtungen - Außengehäuse -- Teil 1: Konstruktionsleitfaden

Structures mécaniques pour équipement électronique - Enveloppes de plein air -- Partie 1: Guide de conception

Donne des directives pour la conception des enveloppes de plein air et s'applique à un vaste domaine d'équipement mécanique, électromécanique et électronique et à leur installation en configuration modulaire. Offre un ensemble de spécifications pour les enveloppes, spécialement pour ce qui concerne les contraintes propres aux applications de plein air, dans les lieux exposés aux intempéries.

Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines (IEC 61969-1:1999)

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-2002
• Withdrawal Date: 19-Jul-2018
• ICS: 31.240 - Mechanical structures for electronic equipment
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 20-Jul-2018
• Due Date: 12-Aug-2018
• Completion Date: 20-Jul-2018
• Ref Project: EN 61969-1:2000 - Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines

Relations

• Replaced By: SIST EN 61969-1:2012 - Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines
• Effective Date: 06-May-2014
• Replaced By: SIST EN 61969-1:2012 - Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines
• Effective Date: 28-Jan-2023
• Replaced By: SIST EN 61969-1:2012 - Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61969-1:2002
01-september-2002
Mechanical structures for electronic equipment - Outdoor enclosures - Part 1:
Design guidelines (IEC 61969-1:1999)
Mechanical structures for electronic equipment - Outdoor enclosures -- Part 1: Design
guidelines
Mechanische Bauweisen für elektronische Einrichtungen - Außengehäuse -- Teil 1:
Konstruktionsleitfaden
Structures mécaniques pour équipement électronique - Enveloppes de plein air -- Partie
1: Guide de conception
Ta slovenski standard je istoveten z: EN 61969-1:2000
ICS:
31.240 Mehanske konstrukcije za Mechanical structures for
elektronsko opremo electronic equipment
SIST EN 61969-1:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61969-1:2002

---------------------- Page: 2 ----------------------

SIST EN 61969-1:2002

---------------------- Page: 3 ----------------------

SIST EN 61969-1:2002

---------------------- Page: 4 ----------------------

SIST EN 61969-1:2002

---------------------- Page: 5 ----------------------

SIST EN 61969-1:2002

---------------------- Page: 6 ----------------------

SIST EN 61969-1:2002
NORME CEI
INTERNATIONALE IEC
61969-1
INTERNATIONAL
Première édition
STANDARD
First edition
1999-12
Structures mécaniques pour équipement
électronique – Enveloppes de plein air –
Partie 1:
Guide de conception
Mechanical structures for electronic equipment –
Outdoor enclosures –
Part 1:
Design guidelines
 IEC 1999 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
L
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 7 ----------------------

SIST EN 61969-1:2002
61969-1 © IEC:1999 – 3 –
CONTENTS
Page
FOREWORD . 5
INTRODUCTION .9
Clause
1 Scope . 11
2 Normative references . 13
3 Terms and definitions. 15
4 Fields of application . 15
5 Dimensional specifications . 17
6 Climatic, mechanical and safety aspects. 17
6.1 General. 17
6.2 Load strength. 17
6.3 Lifting test. 17
6.4 Vibration and shock. 17
6.5 Seismic. 17
7 Electromagnetic shielding performance . 21
8 Thermal properties . 21
Figure 1 – Arrangement overview. 11
Figure 2 – Locations of outdoor enclosures . 15
Table 1 – Environmental conditions. 19
Table 2 – Safety aspects . 19
Bibliography . 23

---------------------- Page: 8 ----------------------

SIST EN 61969-1:2002
61969-1 © IEC:1999 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
––––––––––––
MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT –
OUTDOOR ENCLOSURES –
Part 1: Design guidelines
FOREWORD
1) The IEC (International Electrotechnical Commission) is a world-wide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61969-1 has been prepared by subcommittee 48D: Mechanical
structures for electronic equipment, of IEC technical committee 48: Electromechanical
components and mechanical structures for electronic equipment.
The text of this standard is based on the following documents:
FDIS Report on voting
48D/211/FDIS 48D/217/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.
IEC 61969 contains the following parts, under the general title: Mechanical structures for
electronic equipment – Outdoor enclosures:
– Part 1: Design guidelines
– Part 2: Sectional specification – Co-ordination dimensions for cases and cabinets
– Part 2-1: Detail specification – Dimensions for cabinets
– Part 2-2: Detail specification – Dimensions for cases

---------------------- Page: 9 ----------------------

SIST EN 61969-1:2002
61969-1 © IEC:1999 – 7 –
The committee has decided that the contents of this publication will remain unchanged until
2003. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.

---------------------- Page: 10 ----------------------

SIST EN 61969-1:2002
61969-1 © IEC:1999 – 9 –
INTRODUCTION
This standard is applicable for the selection of design specificatio
...