SIST EN 3660-025:2014

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 025: Cable outlet, style A, straight, unsealed, with cable tie strain relief for EN 3646 - Product standard

This European Standard defines a range of cable outlets, straight, style A, for use under the following conditions: Associated electrical connector(s) : EN 3660-002 Temperature range, Class A : - 65 °C to 200 °C Class N : - 65 °C to 200 °C Class W : - 65 °C to 175 °C.

Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 025: Endgehäuse, Bauform A, gerade, nicht abgedichtet, mit Arm für Kabelbinder für EN 3646 - Produktnorm

Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 025: Raccord, droit, type A, non étanche, avec tenue du câble par frettage pour EN 3646 - Norme de produit

La présente Norme Européenne définit une gamme de raccords droits, type A, à utiliser dans les conditions suivantes :
Connecteur(s) électrique(s) associé(s)   :   EN 3660-002
Plage de température,   Classe A   :    65 °C à 200 °C
   Classe N   :    65 °C à 200 °C
   Classe W   :    65 °C à 175 °C

Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 025. del: Kabelska spojka, tip A, ravna, netesnjena, z držalom za spojko za EN 3646 - Standard za izdelek

Ta evropski standard opredeljuje različne kabelske spojke, ravne, tipa A, za uporabo pod naslednjimi pogoji: Povezani električni konektorji: EN 3660-002 Temperaturni razpon, razred A: – 65 °C do 200 °C razred N: – 65 °C do 200 °C razred W: – 65 °C do 175 °C.

General Information

• Status: Published
• Publication Date: 12-Dec-2013
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 05-Dec-2013
• Due Date: 09-Feb-2014
• Completion Date: 13-Dec-2013
• Ref Project: EN 3660-025:2013 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 025: Cable outlet, style A, straight, unsealed, with cable tie strain relief for EN 3646 - Product standard

Relations

• Replaces: SIST EN 3660-025:2009 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 025: Cable outlet, style A, straight, unsealed, with cable tie strain relief for EN 3646 - Product standard
• Effective Date: 01-Jan-2014
• Replaces: SIST EN 3660-025:2009 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 025: Cable outlet, style A, straight, unsealed, with cable tie strain relief for EN 3646 - Product standard
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 025: Endgehäuse, Bauform A, gerade, nicht abgedichtet, mit Arm für Kabelbinder für EN 3646 - ProduktnormSérie aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 025: Raccord, droit, type A, non étanche, avec tenue du câble par frettage pour EN 3646 - Norme de produitAerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 025: Cable outlet, style A, straight, unsealed, with cable tie strain relief for EN 3646 - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3660-025:2013SIST EN 3660-025:2014en01-januar-2014SIST EN 3660-025:2014SLOVENSKI
STANDARDSIST EN 3660-025:20091DGRPHãþD



SIST EN 3660-025:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3660-025
January 2013 ICS 49.060 Supersedes EN 3660-025:2009English Version
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 025: Cable outlet, style A, straight, unsealed, with cable tie strain relief for EN 3646 - Product standard
Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 025: Raccord, droit, type A, non étanche, avec tenue du câble par frettage pour EN 3646 - Norme de produit
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 025: Endgehäuse, Bauform A, gerade, nicht abgedichtet, mit Arm für Kabelbinder für EN 3646 - Produktnorm This European Standard was approved by CEN on 27 October 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3660-025:2013: ESIST EN 3660-025:2014



EN 3660-025:2013 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Characteristics .45Identification . 106Marking . 117Technical specification . 11 SIST EN 3660-025:2014



EN 3660-025:2013 (E) 3 Foreword This document (EN 3660-025:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the latest by July 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 3660-025:2009. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 3660-025:2014



EN 3660-025:2013 (E) 4 1 Scope This European Standard defines a
...