SIST EN 2286:2017
(Main)Aerospace series - Bushes, flanged aluminium alloy, with self-lubricating liner - Dimensions and loads
Aerospace series - Bushes, flanged aluminium alloy, with self-lubricating liner - Dimensions and loads
This document specifies the characteristics of flanged bushes in aluminium alloy with self-lubricating liner
and the design recommendation of shafts and housings.
The bushes are intended for operation within the temperature range of −55 °C to 121 °C and assembly with
an interference fit into fixed and moving aerospace parts.
Luft- und Raumfahrt - Buchsen mit Flansch aus Aluminium-Legierung mit selbstschmierender Beschichtung - Maße und Belastungen
Diese Europäische Norm legt die Eigenschaften von Buchsen mit Flansch aus Aluminiumlegierung mit selbst¬schmierender Beschichtung sowie Konstruktionsempfehlungen für Welle und Aufnahmebohrung fest.
Die Buchsen sind für den Einsatz im Temperaturbereich von −55 °C bis 121 °C und den Einbau mit Presspassung in starre oder bewegliche Teile von Luft- und Raumfahrzeugen bestimmt.
Série aérospatiale - Bagues à épaulement en alliage daluminium à garniture autolubrifiante - Dimensions et charges
Aeronavtika - Drsne puše s prirobnico iz aluminijeve zlitine s samomazalno oblogo - Mere in nosilnosti
Ta dokument določa lastnosti drsnih puš s prirobnico iz aluminijeve zlitine s samomazalno oblogo ter priporočilo za projektiranje gredi in ohišij.
Puše so predvidene za uporabo v temperaturnem območju od –55 °C do 121 °C in sestavu z nateznim spojem v fiksnih in gibljivih delih aeronavtičnih vozil.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 2286:2017
01-julij-2017
1DGRPHãþD
SIST EN 2286:2001
Aeronavtika - Drsne puše s prirobnico iz aluminijeve zlitine s samomazalno oblogo
- Mere in nosilnosti
Aerospace series - Bushes, flanged aluminium alloy, with self-lubricating liner -
Dimensions and loads
Luft- und Raumfahrt - Buchsen mit Flansch aus Aluminium-Legierung mit
selbstschmierender Beschichtung - Maße und Belastungen
6pULHDpURVSDWLDOH%DJXHVjpSDXOHPHQWHQDOOLDJHGDOXPLQLXPjJDUQLWXUH
DXWROXEULILDQWH'LPHQVLRQVHWFKDUJHV
Ta slovenski standard je istoveten z: EN 2286:2017
ICS:
49.025.20 Aluminij Aluminium
49.030.99 Drugi vezni elementi Other fasteners
SIST EN 2286:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 2286:2017
---------------------- Page: 2 ----------------------
SIST EN 2286:2017
EN 2286
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2017
EUROPÄISCHE NORM
ICS 49.030.99 Supersedes EN 2286:1989
English Version
Aerospace series - Bushes, flanged aluminium alloy, with
self-lubricating liner - Dimensions and loads
Série aérospatiale - Bagues à épaulement en alliage Luft- und Raumfahrt - Buchsen mit Flansch aus
d'aluminium, à garniture autolubrifiante - Dimensions Aluminium-Legierung mit selbstschmierender
et charges Beschichtung - Maße und Belastungen
This European Standard was approved by CEN on 2 January 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2286:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 2286:2017
EN 2286:2017 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Required characteristics . 4
3.1 Configuration — Dimensions — Masses . 4
3.2 Surface roughness . 4
3.3 Materials . 4
3.4 Surface treatment . 5
4 Designation . 8
5 Marking . 8
6 Technical specification . 8
7 Design recommendation . 8
(informative) Standard evolution form . 10
2
---------------------- Page: 4 ----------------------
SIST EN 2286:2017
EN 2286:2017 (E)
European foreword
This document (EN 2286:2017) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this European
Standard has received the approval of the National Associations and the Official Services of the member
countries of ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2017, and conflicting national standards shall be
withdrawn at the latest by November 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 2286:1989.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 2286:2017
EN 2286:2017 (E)
1 Scope
This document specifies the characteristics of flanged bushes in aluminium alloy with self-lubricating liner
and the design recommendation of shafts and housings.
The bushes are intended for operation within the temperature range of −55 °C to 121 °C and assembly with
an interference fit into fixed and moving aerospace parts.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 2086, Aerospace series — Aluminium alloy AL-P2618A — T851 — Hand and die forgings — a ≤ 150 mm
EN 2101, Aerospace series — Chromic acid anodizing of aluminium and wrought aluminium alloys
EN 2284, Aerospace series — Sulphuric acid anodizing of aluminium and wrought aluminium alloys
EN 2311, Aerospace series — Bushes with self-lubricating liner — Technical specification
EN 2701, Aerospace series — Aluminium alloy (2024) — Solution treated, w
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.