SIST EN 3155-065:2019

Aerospace series - Electrical contacts used in elements of connection - Part 065: Contacts, electrical, male, type A, crimp, class S, size 8 - Product standard

This document specifies the required characteristics, tests and tooling applicable to male electrical
contacts, type A, crimp, class S, size 8, used in elements of connection according to EN 3155-002 (this
contact can be fitted in connectors EN 3645 and EN 4165).
It shall be used together with EN 3155-001.
The associated female contacts are defined in EN 3155-083.

Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 065: Elektrische Stiftkontakte, Typ A, crimpbar, Klasse S, Größe 8 - Produktnorm

Dieses Dokument legt die Anforderungen, Prüfungen und Werkzeuge für elektrische Stiftkontakte, Typ A, crimpbar, Klasse S, Größe 8, zur Verwendung in Verbindungselementen nach EN 3155-002 fest (dieser Kon-takt kann in Steckverbinder EN 3645 und EN 4165 eingebaut werden).
Es ist in Verbindung mit EN 3155-001 anzuwenden.
Die dazugehörigen Buchsenkontakte sind in EN 3155-083 festgelegt.

Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 065 : Contacts électriques, mâles, type A, à sertir, classe S, taille 8 - Norme de produit

Le présent document spécifie les caractéristiques requises, les essais et l’outillage applicables aux contacts électriques mâles, de type A, à sertir, de classe S, de taille 8, utilisés dans les organes de connexion suivant l’EN 3155-002 (ce contact peut être monté dans des connecteurs EN 3645 et EN 4165).
Elle doit être utilisée conjointement avec l’EN 3155-001.
Les contacts femelles associés sont définis dans l’EN 3155-083.

Aeronavtika - Električni kontakti za uporabo v veznih elementih - 065. del: Kontakti, električni, moški, tip A, nagubani, razred S, velikost 8 - Standard za proizvod

Ta dokument določa zahtevane značilnosti, preskuse in orodja, ki se uporabljajo za moške električne kontakte tipa A, nagubane, razred S, velikost 8, za uporabo v veznih elementih v skladu s standardom EN 3155-002 (ta kontakt je mogoče pritrditi na konektorje iz standardov EN 3645 in EN 4165).
Uporabljati ga je treba skupaj s standardom EN 3155-001.
Povezani ženski kontakti so določeni v standardu EN 3155-083.

General Information

• Status: Published
• Publication Date: 11-Sep-2019
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 06-Sep-2019
• Due Date: 11-Nov-2019
• Completion Date: 12-Sep-2019
• Ref Project: EN 3155-065:2019 - Aerospace series - Electrical contacts used in elements of connection - Part 065: Contacts, electrical, male, type A, crimp, class S, size 8 - Product standard

Relations

• Revised: SIST EN 3155-065:2016 - Aerospace series - Electrical contacts used in elements of connection - Part 065: Contacts, electrical, male, type A, crimp, class S, size 8 - Product standard
• Effective Date: 31-Aug-2016
• Replaces: SIST EN 3155-065:2016 - Aerospace series - Electrical contacts used in elements of connection - Part 065: Contacts, electrical, male, type A, crimp, class S, size 8 - Product standard
• Effective Date: 04-Sep-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3155-065:2019
01-november-2019
Nadomešča:
SIST EN 3155-065:2016
Aeronavtika - Električni kontakti za uporabo v veznih elementih - 065. del:
Kontakti, električni, moški, tip A, nagubani, razred S, velikost 8 - Standard za
proizvod
Aerospace series - Electrical contacts used in elements of connection - Part 065:
Contacts, electrical, male, type A, crimp, class S, size 8 - Product standard
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen -
Teil 065: Elektrische Stiftkontakte, Typ A, crimpbar, Klasse S, Größe 8 - Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie
065 : Contacts électriques, mâles, type A, à sertir, classe S, taille 8 - Norme de produit
Ta slovenski standard je istoveten z: EN 3155-065:2019
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 3155-065:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 3155-065:2019

---------------------- Page: 2 ----------------------
SIST EN 3155-065:2019


EN 3155-065
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2019
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3155-065:2015
English Version

Aerospace series - Electrical contacts used in elements of
connection - Part 065: Contacts, electrical, male, type A,
crimp, class S, size 8 - Product standard
Série aérospatiale - Contacts électriques utilisés dans Luft- und Raumfahrt - Elektrische Kontakte zur
les organes de connexion - Partie 065 : Contacts Verwendung in Verbindungselementen - Teil 065:
électriques, mâles, type A, à sertir, classe S, taille 8 - Elektrische Stiftkontakte, Typ A, crimpbar, Klasse S,
Norme de produit Größe 8 - Produktnorm
This European Standard was approved by CEN on 3 June 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3155-065:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 3155-065:2019
EN 3155-065:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Required characteristics . 5
5 Designation . 12
6 Marking . 12
7 Technical specification . 12
Bibliography . 13

2

---------------------- Page: 4 ----------------------
SIST EN 3155-065:2019
EN 3155-065:2019 (E)
European foreword
This document (EN 3155-065:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2020, and conflicting national standards shall
be withdrawn at the latest by February 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 3155-065:2015.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
3

---------------------- Page: 5 ----------------------
SIST EN 3155-065:2019
EN 3155-065:2019 (E)
1 Scope
This document specifies the required characteristics, tests and tooling applicable to male electrical
contacts, type A, crimp, class S, size 8, used in elements of connection according to EN 3155-002 (this
contact can be fitted in connectors EN 3645 and EN 4165).
It shall be used together with EN 3155-001.
The associated female contacts are defined in EN 3155-083.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2083, Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard
EN 2591 (all parts), Aerospace series — Elements of electrical and optical connection — Test methods
EN 3155-001, Aerospace series — Electrical contacts used in elements of connection — Part 001: Technical
specification
EN 3155-002, Aerospace series — Electrical contacts used in elements of connection — Part 002: List and
utilization of contacts
EN 3155-083, Aerospace series — Electrical contacts used in elements of connection — Part 083: Contacts,
electrical, female, type A, crimp, class S, size 8 — Product standard
EN 3645-001, Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded
coupling, operating temperature 175 °C or 200 °C continuous — Part 001: Technical specification
EN 4165-001, Aerospace series — Connectors, electrical, rectangular, modular — Operating temperature
175 °C continuous — Part 001: Technical specification
EN 4434, Aerospace series — Copper or copper alloy lightweight conductors for electrical cables — Product
standard (Normal and tight tolerance
...