iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN ISO 13433:2024

(Main)

Geosynthetics - Determination of dynamic perforation (cone drop test) (ISO/DIS 13433:2024)

Geosynthetics - Determination of dynamic perforation (cone drop test) (ISO/DIS 13433:2024)

ISO 13433:2006 specifies a method to determine the resistance of geosynthetics to penetration by a steel cone dropped from a fixed height. The degree of penetration is an indication of the behaviour of the geosynthetic when sharp stones are dropped on its surface.
The method is generally applicable to geosynthetics. However, the validity of this test for some types of products should be considered carefully, as the test principle may not be applicable.

Geokunststoffe - Dynamischer Durchschlagversuch (Kegelfallversuch) (ISO/DIS 13433:2024)

Géosynthétiques - Essai de perforation dynamique (essai par chute d'un cône) (ISO/DIS 13433:2024)

L'ISO 13433:2006 spécifie une méthode de détermination de la résistance de géosynthétiques à la pénétration par un cône d'acier tombant en chute libre d'une hauteur déterminée. Le degré de pénétration constitue une indication sur le comportement du géosynthétique lors de la chute de pierres anguleuses sur sa surface.
La méthode est généralement applicable à tous les géosynthétiques. Pour certains types de produits, il convient de considérer la validité de l'essai avec prudence, car le principe de l'essai peut ne pas être applicable.

Geosintetika - Dinamični luknjalni preskus (preskus s padanjem stožca) (ISO/DIS 13433:2024)

General Information

Status
Not Published
Public Enquiry End Date
29-Jun-2024
ICS
59.080.70 - Geotextiles
Technical Committee
ITEK - Textile and textile products
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
07-May-2024
Due Date
24-Sep-2024
Ref Project
prEN ISO 13433 - Geosynthetics - Determination of dynamic perforation (cone drop test) (ISO/DIS 13433:2024)

Relations

Revises
SIST EN ISO 13433:2007 - Geosynthetics - Dynamic perforation test (cone drop test) (ISO 13433:2006)
Effective Date
22-Jan-2023

Buy Standard

prEN ISO 13433:2024prEN ISO 13433:2024
PreviousNext
Draft
prEN ISO 13433:2024
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 13433:2024
01-junij-2024
Geosintetika - Dinamični luknjalni preskus (preskus s padanjem stožca) (ISO/DIS
13433:2024)
Geosynthetics - Determination of dynamic perforation (cone drop test) (ISO/DIS
13433:2024)
Geokunststoffe - Dynamischer Durchschlagversuch (Kegelfallversuch) (ISO/DIS
13433:2024)
Géosynthétiques - Essai de perforation dynamique (essai par chute d'un cône) (ISO/DIS
13433:2024)
Ta slovenski standard je istoveten z: prEN ISO 13433
ICS:
59.080.70 Geotekstilije Geotextiles
oSIST prEN ISO 13433:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 13433:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 13433:2024
DRAFT
International
Standard
ISO/DIS 13433
ISO/TC 221
Geosynthetics — Determination of
Secretariat: BSI
dynamic perforation (cone drop
Voting begins on:
test)
2024-04-29
ICS: 59.080.70
Voting terminates on:
2024-07-22
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 13433:2024(en)
© ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 13433:2024
DRAFT
ISO/DIS 13433:2024(en)
International
Standard
ISO/DIS 13433
ISO/TC 221
Geosynthetics — Determination of
Secretariat: BSI
dynamic perforation (cone drop test)
Voting begins on:
ICS: 59.080.70
Voting terminates on:
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 13433:2024(en)
© ISO 2024
© ISO 2024 – All rights reserved
ii

---------------------- Page: 4 ----------------------
oSIST prEN ISO 13433:2024
ISO/DIS 13433:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 9862:2024(Main)
Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2023)
EN ISO 9862:2023

This document establishes general principles for the sampling of geosynthetics delivered to construction sites, and for the preparation of test specimens from the samples.
The sampling principles are applicable to geosynthetics supplied in rolls or expandable panels.
NOTE            ISO 186 can be used for products supplied in sheet form.
The specimen-preparation principles are applicable to all geosynthetics.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17738:2023(Main)
Geotextiles and Geotextile related products - Damage during installation procedure - Full scale test
EN 17738:2023

This document describes a procedure for producing mechanical damage to geotextiles and geotextile-
related products due only to compaction of soil or other materials. The damage is assessed visually and
by the loss of tensile strength or other reference tests used to assess the damage caused by this procedure.
The method described is a full-scale test procedure, using a range of fills and compaction methods, and
for the derivation of a reduction factor for installation damage for geotextiles and geotextile-related
products.
This document excludes geosynthetic barriers and products used in pavements and asphalt overlays.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16416:2023(Main)
Geosynthetic clay barriers - Determination of water flux index - Flexible wall permeameter method at constant head
EN 16416:2023

This European Standard describes an index test method that covers laboratory measurement of water flux through saturated clay geosynthetic barrier (GBR-C) specimens using a flexible wall permeameter at constant head.
This test method is applicable to GBR-C products with no additional sealing layers attached.
This test method provides a measurement of flux under a prescribed set of conditions that can be used for manufacturing quality control. The test method can also be used to check conformance.
The flux value determined using this test method is not considered to be representative of the in-service flux of a GBR-C.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12447:2021(Main)
Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water
EN 12447:2021

This European Standard specifies a screening test method for determining the resistance of geotextiles and geotextile-related products to hydrolysis by exposing test specimens to water at elevated temperatures, followed by an evaluation of the changes in properties resulting from such exposure. It is intended as a means of establishing a minimum acceptable level of durability.
The test is applicable to any geotextile and geotextile-related product susceptible to hydrolysis, in particular polyester and polyamide based materials, and in addition to the yarns from which these geotextiles are made. Reinforcing materials shall be tested without the coating and manufacturers shall ensure that the degradation of the coating will not attack or have any negative influence on the degradation of the yarns.
This method is not intended for determining the resistance of geotextiles to hydrolysis under highly acid or alkaline conditions.
NOTE   Performance tests to predict long-term lifetime or to compare products of different polymers or of similar polymers with differing structures can be based on the same method but with a wider range of temperatures and durations.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25619-1:2021(Main)
Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties (ISO 25619-1:2021)
EN ISO 25619-1:2021

This document specifies index test methods for determining the compressive creep properties of
geosynthetic products. The test specimens are subjected either to normal compressive loading or to a
combination of normal compressive loading and shear loading.
The test method with a normal load only (see Clause 5) is the standard method.
The test method in which combined normal and shear loads are applied (see Clause 6) is intended for
products that are sensitive to shear failure, i.e. which have a columnar or cuspated structure.
The tests are carried out on dry specimens or on specimens immersed in water. The test is intended
to be carried out with the specimen immersed in water when any part of the geosynthetic product
contains a hydrophilic polymer.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17445:2021(Main)
Geosynthetics - Standard test for the simulation of rainfall-induced erosion on the surface of a slope protected by geosynthetic erosion control products
CEN/TS 17445:2021

This specific test serves to determine the protective effect of different geosynthetics against water erosion by heavy rain. The test is performed in a laboratory apparatus and the results serve as a performance test.

  • Technical specification
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12225:2021(Main)
Geosynthetics - Method for determining the microbiological resistance by a soil burial test
EN 12225:2020

This standard specifies a method for the determination of the microbiological resistance of geotextiles and geotextile-related products by a soil burial test. It does not specify for which products or in which applications the soil burial test is required. Further reference should be made to CR ISO 13434.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12958-2:2021(Main)
Geotextiles and geotextile-related products - Determination of water flow capacity in their plane - Part 2: Performance test (ISO 12958-2:2020)
EN ISO 12958-2:2020

This document specifies a method for determining the constant-head water flow capacity within the
plane of a geotextile or geotextile-related product, using boundary materials and test conditions of
interest. A standard series of test conditions are proposed, involving soil confinement, low hydraulic
gradients, seating times and an array of normal loads.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12958-1:2021(Main)
Geotextiles and geotextile-related products - Determination of water flow capacity in their plane - Part 1: Index test (ISO 12958-1:2020)
EN ISO 12958-1:2020

This document specifies a method for determining the constant-head water flow capacity within the
plane of a geotextile or geotextile-related product. This document describes the in-plane water flow
index test, only applicable to factory-assembled products. For the in-plane water flow performance test,
see ISO 12958-2.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12960:2020(Main)
Geotextiles and geotextile-related products - Screening test method for determining the resistance to acid and alkaline liquids (ISO 12960:2020)
EN ISO 12960:2020

This standard specifies methods for screening the resistance of geotextile products to liquids while not subjecting them to external mechanical stress.
The standard is applicable to all geotextiles and geotextile related products.
Method A applies particularly to polyamides and method B to polyesters and polyamides. The test results should be interpreted in the context of site conditions.
NOTE This standard only considers conditions where the specimens are fully immersed in the liquids. Though outside the scope of this standard, the test conditions may be modified to accommodate particular applications, e.g. gaseous media. This standard does not preclude use for test specimens that are pre-treated by some method, e.g. by weathering, aqueous extraction conditions or installation damage.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day