prEN ISO 13433

Geosynthetics - Determination of dynamic perforation (cone drop test) (ISO/DIS 13433:2024)

ISO 13433:2006 specifies a method to determine the resistance of geosynthetics to penetration by a steel cone dropped from a fixed height. The degree of penetration is an indication of the behaviour of the geosynthetic when sharp stones are dropped on its surface.
The method is generally applicable to geosynthetics. However, the validity of this test for some types of products should be considered carefully, as the test principle may not be applicable.

Geokunststoffe - Dynamischer Durchschlagversuch (Kegelfallversuch) (ISO/DIS 13433:2024)

Géosynthétiques - Essai de perforation dynamique (essai par chute d'un cône) (ISO/DIS 13433:2024)

L'ISO 13433:2006 spécifie une méthode de détermination de la résistance de géosynthétiques à la pénétration par un cône d'acier tombant en chute libre d'une hauteur déterminée. Le degré de pénétration constitue une indication sur le comportement du géosynthétique lors de la chute de pierres anguleuses sur sa surface.
La méthode est généralement applicable à tous les géosynthétiques. Pour certains types de produits, il convient de considérer la validité de l'essai avec prudence, car le principe de l'essai peut ne pas être applicable.

Geosintetika - Dinamični luknjalni preskus (preskus s padanjem stožca) (ISO/DIS 13433:2024)

General Information

• Status: Not Published
• Publication Date: 24-Nov-2025
• ICS: 59.080.70 - Geotextiles
• Technical Committee: CEN/TC 189 - Geotextiles and geotextile-related products
• Drafting Committee: CEN/TC 189 - Geotextiles and geotextile-related products
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 22-Jul-2024
• Completion Date: 22-Jul-2024
• Ref Project: oSIST prEN ISO 13433:2024 - Geosynthetics - Determination of dynamic perforation (cone drop test) (ISO/DIS 13433:2024)

Relations

• Revises: EN ISO 13433:2006 - Geosynthetics - Dynamic perforation test (cone drop test) (ISO 13433:2006)
• Effective Date: 22-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2024
Geosintetika - Dinamični luknjalni preskus (preskus s padanjem stožca) (ISO/DIS
13433:2024)
Geosynthetics - Determination of dynamic perforation (cone drop test) (ISO/DIS
13433:2024)
Geokunststoffe - Dynamischer Durchschlagversuch (Kegelfallversuch) (ISO/DIS
13433:2024)
Géosynthétiques - Essai de perforation dynamique (essai par chute d'un cône) (ISO/DIS
13433:2024)
Ta slovenski standard je istoveten z: prEN ISO 13433
ICS:
59.080.70 Geotekstilije Geotextiles
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
International
Standard
ISO/DIS 13433
ISO/TC 221
Geosynthetics — Determination of
Secretariat: BSI
dynamic perforation (cone drop
Voting begins on:
test)
2024-04-29
ICS: 59.080.70
Voting terminates on:
2024-07-22
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 13433:2024(en)
DRAFT
ISO/DIS 13433:2024(en)
International
Standard
ISO/DIS 13433
ISO/TC 221
Geosynthetics — Determination of
Secretariat: BSI
dynamic perforation (cone drop test)
Voting begins on:
ICS: 59.080.70
Voting terminates on:
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: [phone]
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 13433:2024(en)
ii
ISO/DIS 13433:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 2
5.1 Clamping system .2
5.2 Frame .2
5.3 Cone .3
5.4 Auxiliary equipment .4
5.5 Measuring cone .4
6 Specimens. 5
6.1 Sampling .5
6.2 Number and dimension of specimens .5
7 Conditioning . 6
8 Procedure . 6
9 Calculation . 6
10 Test report . 7

iii
ISO/DIS 13433:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent
rights identified during the development of the document will be in the Introduction and/or on the ISO list of
patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by ISO/TC 221, Geosynthetics.
This second edition cancels and replaces the first edition (ISO 13433:2006), which has been tec
...