SIST EN 1628:2012/kFprA1:2015

Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading

This European Standard specifies a test method for the determination of resistance to static loading in order to assess the burglar resistant properties of pedestrian door sets, windows, curtain walling, grilles and shutters. It is applicable to the following means of opening: Turning, tilting, folding, turn-tilting, top or bottom hung, sliding (horizontally and vertically) and rolling as well as fixed constructions. This European Standard does not apply to doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises, as covered by EN 13241-1.

Türen, Fenster, Vorhangfassaden, Gitterelemente und Abschlüsse - Einbruchhemmung - Prüfverfahren für die Ermittlung der Widerstandsfähigkeit unter statischer Belastung

Diese Europäische Norm legt ein Prüfverfahren zur Ermittlung der Widerstandsfähigkeit unter statischer Belastung fest, um die einbruchhemmenden Eigenschaften von Türelementen, Fenstern, Vorhangfassaden, Schutzgittern und Abschlüssen zu bewerten. Sie gilt für die folgenden Öffnungsarten: Drehen, Kippen, Falten, Dreh-Kippen, Schwingen, Schieben (horizontal und vertikal) und Rollen sowie für nicht öffenbare Konstruk-tionen.
Diese Europäische Norm gilt nicht für Türen, Tore und Schranken, die für den Einbau in Zugangsbereichen von Personen vorgesehen sind und deren hauptsächlich vorgesehene Verwendung darin besteht, eine sichere Zufahrt für Waren und Fahrzeuge, begleitet oder geführt (gesteuert) von Personen, in industriellen, gewerblichen oder Wohnbereichen zu ermöglichen, was in EN 13241 1 behandelt wird.

Blocs-portes pour piétons, fenêtres, façades rideaux, grilles et fermetures - Résistance à l'effraction - Méthode d'essai pour la détermination de la résistance à la charge statique

La présente Norme européenne définit une méthode d’essai pour déterminer la résistance à la charge statique dans le but d’évaluer les caractéristiques de résistance à l’effraction des blocs-portes pour piétons, fenêtres, façades rideaux, grilles et fermetures. Elle s’applique aux constructions fixes et aux systèmes ouvrants suivants : battant, oscillant, pliant, oscillo-battant, à gonds haut ou bas, coulissant (horizontalement et verticalement) et à enroulement.
La présente Norme européenne ne s’applique pas aux portes, portails et barrières, destinés à être installés dans des zones accessibles aux personnes et dont l’utilisation principale prévue est de permettre l’accès sécurisé de marchandises et de véhicules accompagnés ou conduits par des personnes, dans des locaux industriels et commerciaux ou des garages dans les zones d’habitation, tel que traité par l’EN 13241-1.

Vrata, okna, obešene fasade, mreže in polkna - Protivlomna odpornost - Preskusna metoda za ugotavljanje odpornosti proti statičnim obremenitvam

General Information

• Status: Not Published
• Public Enquiry End Date: 29-Sep-2015
• ICS: 13.310 - Protection against crime
• ICS: 91.060.50 - Doors and windows
• Technical Committee: ISTP - Doors and windows
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 22-Apr-2024
• Due Date: 27-Apr-2024
• Completion Date: 22-Apr-2024
• Ref Project: EN 1628:2011/FprA1 - Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading

Relations

• Consolidated By: SIST EN 1628:2012+A1:2016 - Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading
• Effective Date: 18-Jan-2023
• Amends: SIST EN 1628:2012 - Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading
• Effective Date: 01-Sep-2015

Overview

SIST EN 1628:2012/kFprA1:2015 is a European Standard developed by CEN that specifies a test method for determining the resistance of pedestrian doorsets, windows, curtain walling, grilles, and shutters under static loading. This testing procedure is essential to assess their burglary resistance. The standard applies to various means of opening including turning, tilting, folding, sliding (horizontal and vertical), rolling, as well as fixed constructions. SIST EN 1628:2012/kFprA1:2015 excludes certain industrial or commercial doors and gates primarily designed for goods and vehicle access, which are covered by other standards.

This amendment (FprA1:2015) introduces key refinements to the original EN 1628:2011, enhancing test protocols, definitions, loading procedures, and requirements for test specimens. It ensures more precise evaluation of security elements in building components, supporting manufacturers, testing laboratories, and certification bodies.

Key Topics

• Scope and Applicability
  Specifies test methods for static loading resistance of burglar-resistant doors, windows, and related building elements. Covers multiple opening types except industrial/commercial gates under EN 13241-1.

• Loading Points and Procedures
  Detailed protocols for applying static loads (F1, F2, F3, F3.a) at critical points such as infilling corners, leaf corners, and locking points to simulate attempts at forced intrusion.

• Test Specimen Preparation
  Requirements for glazing positioning, sub-frame support, and specimen examination before testing, ensuring consistent and valid results. Includes provisions for product installation orientations differing from vertical.

• Expression of Results
  Criteria for assessing failure including passage of gap gauges, glass breakage, and locking mechanism performance under load, with specific rules for multiple leaves and sliding or lift-and-slide doors.

• Modifications & Clarifications
  Updates on terms like “active leaf” and “inactive leaf”, revised loading sequences, and adjustment of load magnitudes in line with burglar resistance classes (RC1 to RC6).

• Test Equipment and Sequence
  Updated normative annexes providing illustrations, equipment specifications, and loading sequences standardized for all resistance classes.

Applications

• Building Security Testing
  Provides a recognized method for testing and certifying the burglar resistance level of doorsets, windows, curtain walling, grilles, and shutters, crucial for security product development.

• Compliance and Certification
  Assists manufacturers in demonstrating compliance with European security requirements, supporting market access and product labeling with relevant burglar resistance class.

• Risk Assessment for Residential & Commercial Buildings
  Enables architects, security consultants, and facility managers to specify and select doors and windows with proven resistance to forced entry under static load conditions.

• Quality Control in Manufacturing
  Ensures consistent product performance and reliability through standardized test procedures, allowing for informed improvements in design and materials.

• Integration with Security Systems
  Facilitates coordination between physical security elements and electronic or mechanical locking systems by validating load resistance properties at locking points.

Related Standards

• EN 1627:2011 – Burglar resistance of doors, windows, and shutters – Classification and requirements
• EN 1630:2011 – Burglar resistance – Test method for intrusion resistance of doors, windows, and shutters by mechanical manipulation
• EN 356 – Glass in building – Security glazing – Test methods and classification for resistance to manual attack
• EN 13241-1 – Industrial, commercial doors and gates – Product standard including safety
• EN 12519 – Windows and doors – Terminology

Keywords

Burglar resistance, static loading test, pedestrian doorsets, burglar resistant windows, curtain walling security, grilles and shutters testing, EN 1628, European security standard, locking point resistance, test specimen preparation, burglar resistance classification, building security compliance, mechanical intrusion resistance.

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2015
9UDWDRNQDREHãHQHIDVDGHPUHåHLQSRONQD3URWLYORPQDRGSRUQRVW3UHVNXVQD
PHWRGD]DXJRWDYOMDQMHRGSRUQRVWLSURWLVWDWLþQLPREUHPHQLWYDP
Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance -
Test method for the determination of resistance under static loading
Türen, Fenster, Vorhangfassaden, Gitterelemente und Abschlüsse - Einbruchhemmung -
Prüfverfahren für die Ermittlung der Widerstandsfähigkeit unter statischer Belastung
Blocs-portes pour piétons, fenêtres, façades rideaux, grilles et fermetures - Résistance à
l'effraction - Méthode d'essai pour la détermination de la résistance à la charge statique
Ta slovenski standard je istoveten z: EN 1628:2011/FprA1
ICS:
13.310 Varstvo pred kriminalom Protection against crime
91.060.50 Vrata in okna Doors and windows
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 1628:2011
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
July 2015
ICS 13.310; 91.060.50
English Version
Pedestrian doorsets, windows, curtain walling, grilles and
shutters - Burglar resistance - Test method for the determination
of resistance under static loading
Blocs-portes pour piétons, fenêtres, façades rideaux, grilles Türen, Fenster, Vorhangfassaden, Gitterelemente und
et fermetures - Résistance à l'effraction - Méthode d'essai Abschlüsse - Einbruchhemmung - Prüfverfahren für die
pour la détermination de la résistance à la charge statique Ermittlung der Widerstandsfähigkeit unter statischer
Belastung
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 33.
This draft amendment A1, if approved, will modify the European Standard EN 1628:2011. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1628:2011/FprA1:2015 E
worldwide for CEN national Members.

Contents Page
Foreword .3
1 Modifications to Clause 3, Terms and definitions .4
2 Modifications to 5.1, General .4
3 Modification to 5.2, Preparation and examination of the test specimen .5
4 Modification to 6.2, General .5
5 Modification to 6.3.1.1, Loading point F1: infilling corner .6
6 Modification to 6.3.1.2, Loading point F2: leaf corner .6
7 Modification to 6.3.1.3, Loading point F3: locking points .6
8 Modifications to 6.3.1.4, Loading point: F3.a: locking points .6
9 Modifications to 6.3.3, Test procedure for the leaf (product group 1, burglar resistance
class 1) .6
10 Modifications to 6.3.5, Test procedure for the leaf (product group 2, burglar resistance
class 1) .7
11 Modification to 6.3.6, Test procedure for the leaf (product group 2, burglar resistance
classes 2 and higher) .8
12 Modifications to 6.4, Expression of results for product groups 1 and 2 .8
13 Modifications to 6.6.1, General .8
14 Modification to 6.6.2, Resistance of moving element .8
15 Modifications to Annex A (normative), Test Equipment .9
16 Modification to Annex B (normative), Test sequence for static loading test in resistance
classes 1 to 6 . 13

Foreword
This document (EN 1628:2011/FprA1:2015) has been prepared by Technical Committee CEN/TC 33 “Doors,
windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.
This document is currently submitted to the Unique Acceptance Procedure.
1 Modifications to Clause 3, Terms and definitions
Delete 3.1.
In 3.7, after "junction of grille bars.", add the following NOTE:
“NOTE Locating wedges are not considered to be hardware or attachment points unless they also act as a security
claw/dogbolt.”.
After 3.7, add:
"3.8
inactive leaf
leaf of a multi-leafed window or door, intended to be moved after the active leaf
[SOURCE: EN 12519:2004, definition 2.1.8]

3.9
active leaf
leaf of a multi-leafed window or door intended to be moved first to provide opening.".

2 Modifications to 5.1, General
In the second paragraph, after “(see Figures A.15 to A.63).”, add:
"The sub-frame shall be supported by the test rig so that there will be no movement of the sub-frame during
the test.".
After the second paragraph, add a paragraph:
"Products that are intended to be installed in orientations other than vertical (e.g. roof lights) may be installed
in the vertical orientation for the purpose of this test.".
In NOTE 1, replace "element" with "structure".
In the paragraph after NOTE 1, after "For the purpose of this test the glass pane offering the highest security
level shall be positioned on the attack side of the sample.", add:
"Products shall be glazed in accordance with the manufacturer’s specification.".
Replace Table 1 with the following:
“Table 1 — Test sample glazing requirements
Accessible opening Fixing of the glazing Glazing Test criteria (EN
through the glazing itself on the complete fitted on 1630)
element the test
sample
RC1 N No test, no requirements Test according to
P4A No test
EN 1628, EN 1629,
EN 1630
RC2 N No test, no requirements Test according to P4A Accessible opening
EN 1628, EN 1629, according to EN
EN 1630 1630:2011, 3.11
RC2 No test, classification Test according to P4A Accessible opening
according to EN 356 class EN 1628, EN 1629, according to EN
P4A
EN 1630 1630:2011, 3.11
RC3 No test, classification Test according to P5A Accessible opening
according to EN 356 class EN 1628, EN 1629, according to EN
P5A EN 1630 1630:2011, 3.11
No test, classification
RC4 Test according to P6B Accessible opening
according to EN 356 class EN 1628, EN 1629, according to EN
P6B EN 1630 1630:2011, 3.11
RC5 Classification according Test according to P7B Accessible opening
to EN 356 class P7B and
EN 1628, EN 1629, according to EN
manual test according to
...