SIST EN 14988-2:2006
(Main)Children's high chairs - Part 2: Test methods
Children's high chairs - Part 2: Test methods
This European Standard specifies test methods for the assessment of the requirements of children’s high chairs.
Kinderhochstühle - Teil 2: Prüfverfahren
Diese Europäische Norm legt die Prüfverfahren zur Bewertung der Sicherheit von Kinderhochstühlen fest.
Chaises hautes pour enfants - Partie 2: Méthodes d'essai
La présente Norme européenne spécifie des méthodes d'essai permettant d’évaluer les exigences relatives aux
chaises hautes pour enfants.
Otroški visoki stoli - 2. del: Preskusne metode
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Children's high chairs - Part 2: Test methodsOtroški visoki stoli - 2. del: Preskusne metodeChaises hautes pour enfants - Partie 2: Méthodes d'essaiKinderhochstühle - Teil 2: PrüfverfahrenTa slovenski standard je istoveten z:EN 14988-2:2006SIST EN 14988-2:2006en,fr,de97.140ICS:SIST ENV 1178-2:19961DGRPHãþDSLOVENSKI
STANDARDSIST EN 14988-2:200601-julij-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14988-2March 2006ICS 97.140; 97.190Supersedes ENV 1178-2:1994
English VersionChildren's high chairs - Part 2: Test methodsChaises hautes pour enfants - Partie 2: Méthodes d'essaiKinderhochstühle - Teil 2: PrüfverfahrenThis European Standard was approved by CEN on 6 February 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14988-2:2006: E
EN 14988-2:2006 (E) 2 Contents Page Introduction.5 1 Scope.6 2 Normative references.6 3 Terms and definitions.6 4 General test conditions.6 4.1 Preliminary preparation.6 4.2 Test sequence.6 4.3 Tolerances.6 5 Test equipment.7 5.1 General.7 5.2 Test dummy.7 5.3 Impact hammer.8 5.4 Loading pad.9 5.5 Stops.9 5.6 Floor surface.9 5.7 Beams.9 5.7.1 Beam for stability test.9 5.7.2 Beam for height of lateral protection test.9 5.8 Slide gauges.9 5.9 Force-measuring device.10 5.10 Test load.10 5.11 Small parts cylinder.10 5.12 Small torso probe.11 5.13 Device for measuring the angle, the length and the height of the back rest and the height of the lateral protection.12 6 Test procedures.13 6.1 General.13 6.2 Impact test.13 6.3 Durability of the locking mechanism.14 6.4 Strength of the locking mechanism.14 6.5 Small parts.14 6.6 Openings.15 6.6.1 Openings between moving parts.15 6.7 Strength of harness/belt attachment points.15 6.8 Strength of harness, belt and crotch strap or bar.15 6.9 Back rest tests.15 6.9.1 Determination of back rest angle.15 6.10 Seat vertical static load test.16 6.11 Footrest vertical static load test.16 6.12 Height of lateral protection.16 6.13 Stability tests.16 6.13.1 Positioning.16 6.13.2 Sideways stability.16 6.13.3 Rearwards stability.17 6.13.4 Forwards stability.18 6.13.5 Footrest and horizontal frame member stability.19 6.14 Tray tests.20 6.14.1 Tray strength test.20 6.14.2 Tray vertical static load test and stability.20
EN 14988-2:2006 (E) 3 6.14.3 Tray drop test.20 7 Test report.21
EN 14988-2:2006 (E) 4 Foreword This document (EN 14988-2:2006) has been prepared by Technical Committee CEN/TC BT/TF 144 “High Chairs”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2006, and conflicting national standards shall be withdrawn at the latest by September 2006. This European Standard consist of the following parts: -Part 1: Safety requirements -Part 2: Test methods This document supersedes ENV 1178-2:1994 According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EN 14988-2:2006 (E) 5 Introduction This part of EN 14988 has been prepared in order to specify test methods to provide assurance that children’s high chairs comply with the requirements in Part 1. The tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
EN 14988-2:2006 (E) 6 1 Scope This European Standard specifies test methods for the assessment of the requirements of children’s high chairs. 2 Normative references The following referenced documents are indispensable for the application of this Technical Specification. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 14988-1, Children’s high chairs - Part 1: Safety requirements ISO 7619-2, Rubber vulcanised or thermoplastic - Determination of indentation hardness – Part 2: IRHD pocket meter method 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 14988-1 apply. 4 General test conditions 4.1 Preliminary preparation The tests are designed to be applied to a high chair that is fully assembled and ready for use. The tests shall be carried out in indoor ambient conditions, but if during a test the temperature is outside the range 15°C to 25 °C, the maximum and/or minimum temperature shall be recorded in the test report. The high chair shall be tested as delivered. If of knock down type it shall be assembled according to the manufacturer’s instructions supplied with the high chair. If the high chair can be assembled or combined in different ways or if components can be adjusted, the most adverse combination/adjustment shall be used for each test. Knock-down fittings shall be tightened before testing. Further re-tightening shall not take place unless this is specifically required by the manufacturer.
In the case of designs not catered for in the test procedures, the tests shall be carried out as far as possible as described, and deviations from the test procedure recorded in the test report. 4.2 Test sequence The tests shall be carried out on one sample in the order laid down in this standard. 4.3 Tolerances Unless otherwise stated, the following tolerances apply: Forces: ± 5%; Masses: ± 0,5%; Dimensions: ± 1,0 mm;
EN 14988-2:2006 (E) 7 Angles: ± 2°. Positioning of loading pads: ± 5 mm The forces may be replaced by masses. The relationship of 10 N = 1 Kg shall be used. 5 Test equipment 5.1 General Unless otherwise specified, test forces may be applied by any suitable device because results are dependent only upon correctly applied forces and not upon the apparatus. The test forces in the static load tests shall be applied sufficiently slowly to ensure that negligible dynamic forces are applied. 5.2 Test dummy A rigid cylinder 200 mm in diameter and 300 mm in h
...
SLOVENSKI OSIST prEN 14988-2:2004
PREDSTANDARD
oktober 2004
Otroški visoki stoli - 2. del: Preskusne metode
Children's high chair - Part 2: Test methods
ICS 97.140 Referenčna številka
OSIST prEN 14988-2:2004(
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.