EN 14988-2:2006

Children's high chairs - Part 2: Test methods

This European Standard specifies test methods for the assessment of the requirements of children’s high chairs.

Kinderhochstühle - Teil 2: Prüfverfahren

Diese Europäische Norm legt die Prüfverfahren zur Bewertung der Sicherheit von Kinderhochstühlen fest.

Chaises hautes pour enfants - Partie 2: Méthodes d'essai

La présente Norme européenne spécifie des méthodes d'essai permettant d’évaluer les exigences relatives aux
chaises hautes pour enfants.

Otroški visoki stoli - 2. del: Preskusne metode

General Information

• Status: Withdrawn
• Publication Date: 28-Mar-2006
• Withdrawal Date: 31-Jul-2012
• ICS: 97.140 - Furniture
• ICS: 97.190 - Equipment for children
• Technical Committee: CEN/TC 364 - Project Committee - High Chairs
• Drafting Committee: CEN/TC 364 - Project Committee - High Chairs
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Aug-2012
• Completion Date: 01-Aug-2012
• Ref Project: SIST EN 14988-2:2006 - Children's high chairs - Part 2: Test methods

Relations

• Replaces: ENV 1178-2:1994 - Furniture - Children's high chairs for domestic use - Part 2: Test methods (ISO 9221-2 modified)
• Effective Date: 22-Dec-2008
• Merged Into: EN 14988-2:2006+A1:2012 - Children's high chairs - Part 2: Test methods
• Effective Date: 13-Jun-2012
• Amended By: EN 14988-2:2006/FprA1 - Children's high chairs - Part 2: Test methods
• Effective Date: 25-Feb-2009

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Children's high chairs - Part 2: Test methodsOtroški visoki stoli - 2. del: Preskusne metodeChaises hautes pour enfants - Partie 2: Méthodes d'essaiKinderhochstühle - Teil 2: PrüfverfahrenTa slovenski standard je istoveten z:EN 14988-2:2006SIST EN 14988-2:2006en,fr,de97.140ICS:SIST ENV 1178-2:19961DGRPHãþDSLOVENSKI
STANDARDSIST EN 14988-2:200601-julij-2006

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14988-2March 2006ICS 97.140; 97.190Supersedes ENV 1178-2:1994
English VersionChildren's high chairs - Part 2: Test methodsChaises hautes pour enfants - Partie 2: Méthodes d'essaiKinderhochstühle - Teil 2: PrüfverfahrenThis European Standard was approved by CEN on 6 February 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14988-2:2006: E

In the case of designs not catered for in the test procedures, the tests shall be carried out as far as possible as described, and deviations from the test procedure recorded in the test report. 4.2 Test sequence The tests shall be carried out on one sample in the order laid down in this standard. 4.3 Tolerances Unless otherwise stated, the following tolerances apply:  Forces: ± 5%;  Masses: ± 0,5%;  Dimensions: ± 1,0 mm;

Key 1 Edge radius: (5±1) mm 2 Attachment points Figure 1 — Test dummy

Key 1 Pendulum head, steel mass 6,4 kg 2 Hardwood 3 Rubber 50 IRHD (ISO 7619-2) 4 Pendulum arm, length 950 mm; high tensile steel tube ∅ 38 x 2 mm; mass
2 kg ± 0,2 kg 5 Pivot point Mass of assembly (Pos. No 1,2 and 3): 6,5 kg ± 0,07 kg Figure 2 — Impact hammer
...