SIST EN 61300-2-44:2009

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices (IEC 61300-2-44:2008)

This part of IEC 61300 specifies a test to determine the influence of a flexing under tensile load of the strain relief of fibre optic devices. The intension is to simulate the number of flexing which would typically be experienced during service. This test is applied to both single fibre cable and multiple fibre cable.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-44: Prüfungen - Biegen der Zugentlastung von Lichtwellenleiterbauteilen (IEC 61300-2-44:2008)

Dispositifs d'interconnexion et composants passifs à fibres optiques - Procédures fondamentales d'essais et de mesures - Partie 2-44: Essais - Flexion du serre-câble des dispositifs à fibres optiques (CEI 61300-2-44:2008)

Povezovalne naprave in pasivne komponente optičnih vlaken - Postopki osnovnega preskušanja in merjenja - 2-44. del: Preskusi - Spreminjanje natezne obremenitve povezovanja naprav z optičnimi vlakni (IEC 61300-2-44:2008)

General Information

• Status: Withdrawn
• Publication Date: 17-Nov-2008
• Withdrawal Date: 13-Aug-2014
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 13-Aug-2014
• Due Date: 05-Sep-2014
• Completion Date: 14-Aug-2014
• Ref Project: EN 61300-2-44:2008 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices

Relations

• Replaces: SIST EN 61300-2-44:2005 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
• Effective Date: 01-Jan-2009
• Replaced By: SIST EN 61300-2-44:2013 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
• Effective Date: 28-Jan-2023
• Revised: SIST EN 61300-2-44:2013 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
• Effective Date: 06-May-2014
• Replaced By: SIST EN 61300-2-44:2013 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
• Effective Date: 07-Jun-2022
• Replaces: SIST EN 61300-2-44:2005 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
• Effective Date: 13-May-2010
• Replaces: SIST EN 61300-2-44:2005 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-2-44:2009
01-januar-2009
1DGRPHãþD
SIST EN 61300-2-44:2005
3RYH]RYDOQHQDSUDYHLQSDVLYQHNRPSRQHQWHRSWLþQLKYODNHQ3RVWRSNL
RVQRYQHJDSUHVNXãDQMDLQPHUMHQMDGHO3UHVNXVL6SUHPLQMDQMHQDWH]QH
REUHPHQLWYHSRYH]RYDQMDQDSUDY]RSWLþQLPLYODNQL,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic
devices (IEC 61300-2-44:2008)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-44: Prüfungen - Biegen der Zugentlastung von
Lichtwellenleiterbauteilen (IEC 61300-2-44:2008)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Procédures
fondamentales d'essais et de mesures - Partie 2-44: Essais - Flexion du serre-câble des
dispositifs à fibres optiques (CEI 61300-2-44:2008)
Ta slovenski standard je istoveten z: EN 61300-2-44:2008
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-2-44:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61300-2-44:2009

---------------------- Page: 2 ----------------------

SIST EN 61300-2-44:2009

EUROPEAN STANDARD
EN 61300-2-44

NORME EUROPÉENNE
November 2008
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61300-2-44:2005


English version


Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-44: Tests -
Flexing of the strain relief of fibre optic devices
(IEC 61300-2-44:2008)


Dispositifs d'interconnexion  Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Procédures fondamentales und passive Bauteile -
d'essais et de mesures - Grundlegende Prüf- und Messverfahren -
Partie 2-44: Essais - Teil 2-44: Prüfungen -
Flexion du serre-câble Biegen der Zugentlastung
des dispositifs à fibres optiques von Lichtwellenleiterbauteilen
(CEI 61300-2-44:2008) (IEC 61300-2-44:2008)




This European Standard was approved by CENELEC on 2008-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-44:2008 E

---------------------- Page: 3 ----------------------

SIST EN 61300-2-44:2009
EN 61300-2-44:2008 - 2 -
Foreword
The text of document 86B/2541/CDV, future edition 2 of IEC 61300-2-44, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-44 on 2008-10-01.
This European Standard supersedes EN 61300-2-44:2005.
The specific changes from EN 61300-2-44:2005 include the diversification of the severity according to
environmental categories and components types.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-44:2008 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 61300-2-44:2009
- 3 - EN 61300-2-44:2008
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 2003
passive components - Basic test and
measurement procedures -
Part 1: General and guidance


1) 2)
IEC 61300-3-1 - Fibre optic interconnecting devices and EN 61300-3-1 2005
passive components - Basic test and
measurement procedures -
Part 3-1: Examinations and measurements -
Visual examination


1) 2)
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 2003
passive components - Basic test and
measurement procedures -
Part 3-3: Examinations and measurements -
Active monitoring of changes in attenuation
and return loss


1) 2)
IEC 61300-3-4 - Fibre optic interconnecting devices and EN 61300-3-4 2001
passive components - Basic test and
measurement procedures -
Part 3-4: Examinations and measurements -
Attenuation




1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 5 ----------------------

SIST EN 61300-2-44:2009

---------------------- Page: 6 ----------------------

SIST EN 61300-2-44:2009
IEC 61300-2-44
Edition 2.0 2008-07
INTERNATIONAL
STANDARD


Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures –
Part 2-44: Tests – Flexing of the strain relief of fibre optic devices


INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
J
ICS 33.180.20 ISBN 2-8318-9900-1
® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 61300-2-44:2009
– 2 – 61300-2-44 © IEC:2008(E)
CONTENTS
FOREWORD.3
1 Scope.5
2 Normative references.5
3 General description.5
4 Apparatus.6
4.1 General .6
4.2 Optical source (S).7
4.3 Detector (D).7
4.4 Mounting fixture.7
4.5 Flex test machine or jig.7
5 Procedure.7
5.1 Preparation of specimens .7
5.2 Preconditioning.7
5.3 Initial measurements .7
5.4 Conditioning .8
5.5 Recovery .8
5.6 Final measurements .8
6 Severity .8

Figure 1 – Apparatus for testing .6
Figure 2 – Application of the load in the case of duplex cordage .7

Table 1 – Severities .8

---------------------- Page: 8 ----------------------

SIST EN 61300-2-44:2009
61300-2-44 © IEC:2008(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –

Part 2-44: Tests – Flexing of the strain relief
of fibre optic devices


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate i
...